Tender For Annual Plan-88/25-26 In Panamaram Gp-Mathothupoyil Vakayad Anganwadi Frist Floor Construction In Ward20(Maintenance Fund 3L)-General Civil Work, Panamaram-Kerala
TDR : 54460686
Tender Notice
BOQ
1 Days Left
Panamaram
Kerala
Tender For Annual Plan-88/25-26 In Panamaram Gp-Mathothupoyil Vakayad Anganwadi Frist Floor Construction In Ward20(Maintenance Fund 3L)-General Civil Work
Name of Work:- Annual Plan-88/25-26 IN PANAMARAM GP-MATHOTHUPOYIL VAKAYAD ANGANWADI FRIST FLOOR CONSTRUCTION IN WARD20(MAINTENANCE FUND 3L)-General Civil Work
Sl. No.
Item Description
1
Annual Plan-88/25-26 IN PANAMARAM GP-MATHOTHUPOYIL VAKAYAD ANGANWADI FRIST FLOOR CONSTRUCTION IN WARD20(MAINTENANCE FUND 3L)-General Civil Work
2
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
3
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
4
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
5
50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
6
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
7
13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
8
OD461485/2025-2026:providing and fixing PVC pathy 150*200 mm size including cost ofmaterials,labour charges etc
9
OD461486/2025-2026:Supplying and fixing Name board Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
