|
| 1 | APPENDIX A - KIDANGOOR LI Scheme |
| 2 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 3 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 4 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 5 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | OD13583/2025-2026:Charges for dismantling motor and pump from the base plate for one motor andother related accessories from LI station and conveyed to the work shop with the help of chain block, wiresling , coir rope etc complete as directed by the departmental officers at site |
| 7 | OD13575/2025-2026:overhauling the the existing motor, separate the strator and rotor of motor , removethe dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearingsassembling and refitting the same, and conducting test run etc complete as per the direction of departmentalofficers at site |
| 8 | OD13573/2025-2026:Charges for erecting 1 no motor with corresponding pump and other accessories incorrect alignment on bed including porviding electric connections and trial running etc complete |
| 9 | OD13577/2025-2026:charges for resetting vacuum pump on correct alignment including damaged piperefixing the valve, checking the joints etc complete |
| 10 | OD13579/2025-2026::supplying transformer oil |
| 11 | OD13581/2025-2026:Supplying engine oil |
| 12 | OD13578/2025-2026:Supplying grease |
| 13 | OD13582/2025-2026:Supplying carbon brush |
| 14 | OD13580/2025-2026:Supplying graphite packing |
| 15 | OD13574/2025-2026:Supplying and providing 12 mm gland packing |
| 16 | OD13576/2025-2026:Supplying water seal |
| 17 | APPENDIX E - PRAYAR LI SCHEME |
| 18 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 19 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 20 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 21 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 22 | OD13557/2025-2026:Charges for dismantling motor and pump from the base plate for one motor andother related accessories from LI station and conveyed to the work shop with the help of chain block, wiresling , coir rope etc complete as directed by the departmental officers at site |
| 23 | OD13559/2025-2026:overhauling the the existing motor, separate the strator and rotor of motor , removethe dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearingsassembling and refitting the same, and conducting test run etc complete as per the direction of departmentalofficers at site |
| 24 | OD13561/2025-2026:Charges for erecting 1 no motor with corresponding pump and other accessories incorrect alignment on bed including porviding electric connections and trial running etc complete |
| 25 | OD13562/2025-2026:charges for resetting vacuum pump on correct alignment including damaged piperefixing the valve, checking the joints etc complete |
| 26 | OD13560/2025-2026::supplying transformer oil |
| 27 | OD13553/2025-2026:Supplying engine oil |
| 28 | OD13552/2025-2026:Supplying grease |
| 29 | OD13555/2025-2026:Supplying carbon brush |
| 30 | OD13556/2025-2026:Supplying graphite packing |
| 31 | OD13554/2025-2026:Supplying and providing 12 mm gland packing |
| 32 | OD13558/2025-2026:Supplying water seal |
| 33 | 12.51.3:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :North light curves |
| 34 | Appendix B-MEVELLOOR LI SCHEME |
| 35 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 36 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 37 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 38 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 39 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 40 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 41 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 42 | OD13545/2025-2026::supplying transformer oil |
| 43 | OD13546/2025-2026:Supplying water seal |
| 44 | OD13549/2025-2026:Supplying carbon brush |
| 45 | OD13550/2025-2026:Supplying and providing 12 mm gland packing |
| 46 | OD13551/2025-2026:Supplying grease |
| 47 | OD13547/2025-2026:charges for resetting vacuum pump on correct alignment including damaged piperefixing the valve, checking the joints etc complete |
| 48 | OD13548/2025-2026:Charges for erecting 1 no motor with corresponding pump and other accessories incorrect alignment on bed including porviding electric connections and trial running etc complete |
| 49 | OD13544/2025-2026:overhauling the the existing motor, separate the strator and rotor of motor , removethe dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearingsassembling and refitting the same, and conducting test run etc complete as per the direction of departmentalofficers at site |
| 50 | OD13543/2025-2026:Charges for dismantling motor and pump from the base plate for one motor andother related accessories from LI station and conveyed to the work shop with the help of chain block, wiresling , coir rope etc complete as directed by the departmental officers at site |
| 51 | APPENDIX C- MULAKKULAM SOUTH KUNNAPPALLY 1st AND 2nd STAGES LI SCHEME |
| 52 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 53 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 54 | OD13587/2025-2026::supplying transformer oil |
| 55 | OD13592/2025-2026:Supplying water seal |
| 56 | OD13588/2025-2026:Supplying carbon brush |
| 57 | OD13590/2025-2026:Supplying and providing 12 mm gland packing |
| 58 | OD13589/2025-2026:Supplying grease |
| 59 | OD13584/2025-2026:charges for resetting vacuum pump on correct alignment including damaged piperefixing the valve, checking the joints etc complete |
| 60 | OD13586/2025-2026:Charges for erecting 1 no motor with corresponding pump and other accessories incorrect alignment on bed including porviding electric connections and trial running etc complete |
| 61 | OD13591/2025-2026:overhauling the the existing motor, separate the strator and rotor of motor , removethe dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearingsassembling and refitting the same, and conducting test run etc complete as per the direction of departmentalofficers at site |
| 62 | OD13585/2025-2026:Charges for dismantling motor and pump from the base plate for one motor andother related accessories from LI station and conveyed to the work shop with the help of chain block, wiresling , coir rope etc complete as directed by the departmental officers at site |
| 63 | APPENDIX D- MULAKKULAM SOUTH LI SCHEME |
| 64 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 65 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 66 | 15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix) |
| 67 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 68 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 69 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 70 | OD13564/2025-2026::supplying transformer oil |
| 71 | OD13565/2025-2026:Supplying grease |
| 72 | OD13568/2025-2026:Charges for dismantling motor and pump from the base plate for one motor andother related accessories from LI station and conveyed to the work shop with the help of chain block, wiresling , coir rope etc complete as directed by the departmental officers at site |
| 73 | OD13569/2025-2026:overhauling the the existing motor, separate the strator and rotor of motor , removethe dust, cleaning with petrol, varnishing the winding with best quality varnish , greasing the bearingsassembling and refitting the same, and conducting test run etc complete as per the direction of departmentalofficers at site |
| 74 | OD13563/2025-2026:Charges for erecting 1 no motor with corresponding pump and other accessories incorrect alignment on bed including porviding electric connections and trial running etc complete |
| 75 | OD13571/2025-2026:charges for resetting vacuum pump on correct alignment including damaged piperefixing the valve, checking the joints etc complete |
| 76 | OD13572/2025-2026:Supplying and providing 12 mm gland packing |
| 77 | OD13570/2025-2026:Supplying carbon brush |
| 78 | OD13567/2025-2026:Supplying graphite packing |
| 79 | OD13566/2025-2026:Supplying water seal Please Enable Macros to View BoQ information |
