Tender For Annual Plan-Kokkayar Gp 112/26: Maintanance Of Kanakapuram Angan Vadi -Kokkayar Gp 112/26: Maintanance Of Kanakapuram Angan Vadi-General Civil Work, Kokkayar-Kerala
TDR : 54460564
Tender Notice
BOQ
Expired
Kokkayar
Kerala
Tender For Annual Plan-Kokkayar Gp 112/26: Maintanance Of Kanakapuram Angan Vadi -Kokkayar Gp 112/26: Maintanance Of Kanakapuram Angan Vadi-General Civil Work
Name of Work:- Annual Plan-Kokkayar GP 112/26: Maintanance of Kanakapuram Angan vadi -Kokkayar GP 112/26: Maintanance of Kanakapuram Angan vadi-General Civil Work
Sl. No.
Item Description
1
Roofing
2
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
3
50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood
4
21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
5
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
6
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
7
OD483291/2025-2026:Providing and fixing precoated galvanised iron profile sheet(CE OBSERVEDDATA)(size,shape and pitch of corrugation as approved by Engineer-in-charge)0.35mm(+0.05%),total coatedthicknesswith zinkcoating 120gramsper sqmas per IS:277,in240 mpa steel grade ,5-7 micronsepoxy primer on both side of the sheet and polyestertop coat15-18 microns.Sheet should have protective guard filmof 25 micronsminimum to avoid scratches during transportationand should be supplied in singlelength upto 12 metreor as desiredby Engineer - in- charge.The sheet shall be fixedusing self drilling / self tapping screws of size(5.55X55 mm)with EPDM seal completeupto any pitch in horizontal/vertical or curved surfaces,excluding the cost ofpurlins,rafters and trusses and including cutting to size and shape wherever required Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
