|
| 1 | Taking down chowkats or frame of size not exceeding 1.50 Sqm each, with shutter (without taking off shutter from frames) complete all as specified and directed |
| 2 | Taking down chowkats or frame of size exceeding 1.50 Sqm but not exceeding 4 Sqm each, with shutter (without taking off shutter from frames) complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1.00 sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 4 | S&F pressed steel frames of size 125mm x 60mm, for doors, one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregates) tarring and sanding to inner surface (surface in contact with concrete/brick surface) of chowkats complete all as specified and directed. |
| 5 | S&F 2nd class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed. |
| 6 | S&F flush shutters, 35 mm thick, solid core construction , with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 7 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with M.S. square tube complete all as specified and das directed by Engineer-in-Charge. |
| 8 | S&F 30mm thick factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain coloured PVC sheets for top, lock & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain coloured PVC sheet fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. |
| 9 | S&F aluminium alloy anodised, sliding door bolt, 300mm long with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 10 | S&F aluminium, anodised, barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed. |
| 11 | S&F aluminium alloy handles, size 150mm, fabricated type anodised complete all as specified and directed. |
| 12 | S&F 300 mm long mild steel ordinary rat tail rod pattern spring, including roller and roller plate including fixing through welding/ bolts/ screws in metal/ wooden frame complete all as specified and directed. |
| 13 | S&F butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed. |
| 14 | M&L for decorative laminate 1.5mm type 1 of thickness surface finish (Sunmika), colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions on and including 18mm thick plywood grade BWR, type BB for cupboard shutters including demolition of existing complete all as specified and directed. |
| 15 | M&L for 4mm thick plywood, 3 ply, grade BWR type BB fixed to cupboard shutter with screws including demolition of existing plywood complete all as specified and as directed. |
| 16 | M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 17 | S&F continuous (Piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 40 mm complete all as specified and directed. |
| 18 | S&F magnet catch brass body of approved quality 75mm size complete all as specified and directed. |
| 19 | S&F hasp and staple, size 150mm, aluminum anodized, safety type, with mild steel hinge pin, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 20 | S&F in repair stainless steel telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed. |
| 21 | S&F in repair knobs, 40 mm dia of mild steel, bright finish, cup board knobs, fixed with nut, screws and washers complete all as specified and directed. |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 23 | S&F figured glass, 3mm thick, pin headed type and glazing with oil putty, in squares, not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 24 | S&F sheet glass, 4mm thick, ordinary quality, in squares, exceeding 0.50 Sqm in each pane fixed oil putty complete all as specified and directed. |
| 25 | M&L for applying two coats of synthetic enamel painting over one coat of primer of red oxide zinc chrome to new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described, including preparation of surfaces all as specified and as directed. |
| 26 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth including preparation of surfaces complete all as specified and directed. |
| 27 | M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 28 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 29 | M&L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed. |
| 30 | M&L for preparing old plastered or unplastered surfaces of walls including cornices and applying two coats of distemper oil emulsion, white or tinted complete all as specified and directed. |
| 31 | M&L for preparation of old decorated plastered surface by complete removal of existing treatment and applying two coats of oil bound distemper over and including 1mm thick wall putty to make surface smooth complete all as specfied and directed. |
| 32 | M&L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of cement base paint complete all as specified and directed. |
| 33 | M&L for preparation of old decorated surface by complete removal of existing treatment and applying one coat of texture paint of approved shade over one coat of primer over one coat of wall putty complete all as specified and directed. |
| 34 | M&L for cleaning and preparation of old decorated plastered surface and applying self adhesive PVC decorated wall papers complete all as specified and as directed. |
| 35 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | M&L for preparation of old painted steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 37 | M&L for 15mm thick rendering in cm 1:6 on fair faces of brick or concrete surfaces, finished the surfaces even and smooth without using extra cement all as specified and directed. |
| 38 | M&L for 15mm thick rendering in cm 1:6 on fair faces of brick or concrete surfaces, finished the surfaces even and smooth without using extra cement including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed. |
| 39 | All as per item No 38 above but 5mm thick on ceiling in CM 1:3. |
| 40 | M&L for 15mm thick rendering in cm 1:4 on other than fair faces of brick surfaces , finished the surfaces even and fair upto height 12m including taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed. |
| 41 | M&L for preparation of new plaster surface and applying two coats of cement base paint upto 12m height complete all as specified. |
| 42 | M&L for preparation of new plaster surface of ceiling and applying two coats of white wash complete all as specified. |
| 43 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper (of approved shade) (Acrylic) on walls over a coat of primer complete all as specified. |
| 44 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified and directed. |
| 45 | S&F in repairs vitreous china wash down water closet pan pedestal pattern, coloured, including fixing bolts ( excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 46 | S&F in repair plastic water closet seat cover coloured /white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed. |
| 47 | S&F in repair PVC valve less, syphonic action type, duel type flushing cistern 10 ltrs capacity, low level, with inlet, ball valve, float and handle, 32mm dia PVC flush pipe complete all as specified and directed |
| 48 | S&F in repair vitreous china wash hand basin with full pedestal, white, flat back, size 550x400mm (excluding taps, chain, plug and porcelain stopper) but including brackets, brass CP waste coupling 32mm bore, PVC waste pipe and cutting for and pinning in ends of brackets complete all as specified and directed. |
| 49 | S&F in repair brass CP mixer, 15mm bore, for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed. |
| 50 | S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 51 | S&F in repair brass CP flushing jet including pipe for european type closet including fixing to 15mm dia pipe of suitable length with brass check nut complete all as specified and directed. |
| 52 | S&F in repair stop valves, 15mm bore, fancy type, cast copper alloy chromium plated with long shank and cup , (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 53 | S&F in repair angle valves, 15mm bore, cast copper alloy chromium plated, fancy type, screwed down, high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified |
| 54 | S&F in repair brass CP centre hole basin mixture 15 mm bore complete all as specified and directed. |
| 55 | S&F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipe, including bedding in cement on to dwarf wall including cast iron cantilever brackets, connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 56 | S&F GI tubing,15mm bore, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down of old unserviceable pipe complete all as specified and directed. |
| 57 | S&F GI tubing, 20mm bore, medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down of old unserviceable pipe complete all as specified and directed. |
| 58 | S&F in repair 100mm dia stainless steel grating with or without hinge type or hole type complete all specified and directed. |
| 59 | S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints with brass CP arm 225mm long, 15 mm size complete all as specified and directed |
| 60 | S&F in repair PVC mirror cabinet, size 350x450mm, with shelves of best quality including fixing arrangements, complete all as specified and directed. |
| 61 | S&F in repair MS pipe 25mm bore, powder coated, chromium plated with fixing brackets stops rollers including fancy type knobs two nos to each curtain rod complete all as specified and directed. |
| 62 | S&F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples complete all as specified and directed. |
| 63 | S&F in repair sheet glass shelf assembly 60cm long in oval shape consisting 8mm to 10mm thick glass including brass CP guard railing with double rail complete all as specified and directed. |
| 64 | S&F in repair brass CP wall mixer with telephonic shower arrangement, including connecting legs and telephonic shower suitable for 15mm dia bore pipe. |
| 65 | S&F in repair pillar tap, 15mm bore, cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repairs bib tap, 15mm dia, cast copper alloy CP, long body fancy type, screwed, high pressure for iron pipe complete all as specified and directed. |
| 67 | S&F in repairs bib tap, 15mm dia, cast copper alloy CP, short body, screwed, high pressure for iron pipe complete all as specified and directed. |
| 68 | S&F in repair CP brass health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed. |
| 69 | S&F in rotational moulded polyethylene water storage tank, white (cylindrical vertical with closed top) of 1000 ltrs capacity, three layers, fixed in position all as specified in SSR Part-I including one 20mm bore ball brass valve high pressure with polythene float and flynut and including disconnecting and demolition existing old tanks complete all as specified and directed. |
| 70 | S&F in repair PVC waste pipe 32mm bore fixed to WHB as per existing length complete all as specified and directed. |
| 71 | M&L for rendering 15mm thick in cm 1:4 in sunken portion of slab finishing fair and even using waterproofing compound complete all as specified and as directed. (Note :- WPC shall be measured and paid for separately). |
| 72 | Supply only integral water proofing compound. |
| 73 | M&L for APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non wove fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area/ sunken floor with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in including bitumen primer @ 0.40 kg /Sqm and a tack coat of hot industrial bitumen 85/25 at the rate of 1.6 kg per sq.m after cleaning surface complete all as specified and directed. |
| 74 | M&L for PCC 1:7:12 type E-2 (using 40 mm graded crushed stone aggregate) as in filling, foundation and mass concrete in sunken floor including demolition of PCC above ground floor and in any position complete all as specified and as directed. |
| 75 | S&F glazed ceramic coloured tiles 300x200mmx 6 to 7 mm thick, on 10mm thick CM 1:4 backing plaster on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including demolition wall tiles and CM bedding, removing rubbish off the premises complete all as specified and directed. |
| 76 | M&L for coloured glazed ceramic digital tiles in vertical surface 450 x 300 x 7 mm thick on cement screed 10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including demolition wall tiles and CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 77 | S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors on cement screed 15mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles including demolition wall tiles and CM bedding complete all as specified and directed. |
| 78 | M&L for vitrified ceramic tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors on cement screed 15mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including demolition tiles and CM bedding, removing rubbish off the premises all as specified and directed. |
| 79 | All as per item No 78 above but on vertical but over 10 mm thick backing plaster in CM 1:4 including demolition tiles and CM bedding complete all as specified and directed. |
| 80 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish away to low lying areas complete all as specified and directed. |
| 81 | M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor, 40mm thick, finished even and smooth without using extra cement complete all as specified and directed. |
| 82 | M&L for PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) 75mm thick, as in plinth protection finishing even and fair laid in alternate bays complete all as specified and directed. |
| 83 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 84 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floors to raise level complete all as specified. |
| 85 | M&L for coloured chequered cement concrete tiles with grey cement and pigment, 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and screed complete all as specified and directed. |
| 86 | M&L for 60mm thick M-35 grade pre cast machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006 fixed with grey cement and no pigment over and including 25mm thick sand filling all as specified and as directed. |
| 87 | M&L for brick work with sub class 'B', old size bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 including demolition of brick work built in CM including all quoins, pillars etc.of any description and in any position complete all as specified and directed |
| 88 | M&L for granite (of any type) work (table rubbed and polished), 14 to 18mm thick, in steps , jambs, pillars, window - cills, cooking plate forms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing stone slab/tiles of any description or thickness in floors, aprons etc laid in CM all as specified and directed. |
| 89 | M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in shelves including demolition existing complete all as specified and directed. |
| 90 | S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 91 | Use and waste of form work to soffits of shelves etc and similar items including edges, supports, overhangs, etc. for rough finished flat surfaces of concrete complete all as specified and directed. |
| 92 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing complete all as specified and directed . |
| 93 | S&F in reapir stack clamps for 110 mm pipe out of 20x1.5mm galvanised mild steel flat and iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 94 | M&L for PVC (SWR ) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and directed. |
| 95 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 96 | S&F powder coated aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) handle (1 no.) 150mm long complete all as specified. |
| 97 | S&F in repair powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre,including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,all complete as per requirement and direction of Engr-in Charge. |
| 98 | S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts (four Nos for each window). (Note: Wire cloth, glass, painting shall be measured and paid for separately). |
| 99 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including taking down old existing window/ ventilator complete all as specified and directed. Notes: (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, painting shall be measured and paid for separately |
| 100 | M&L for preparation of old decorated surface by complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 101 | S&F in repair viteous china coloured WC Italion finish pedestal pan with attached vitreous china flushing cistern (monolithic type) of push button type having dual flushing cistern of same colour including PVC seat cover same colour including brass jet chromium plated with PVC connection 15mm bore complete all as specified and directed. |
| 102 | Demolition of framed timber scantlings 40 sqcm and over in section, in any position all as specified and directed. |
| 103 | S&F for roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc using Fe 410 -W(GdeE-250) quality A complete including dismanteling old ones all as specified and directed. |
| 104 | S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / clading to wall, fixed with self tapping screw all as specified and directed. |
| 105 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 55,156.50 from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
