|
| 1 | PWD(WB), BUILDING WORKS, Page-11, Item-10 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 5m as directed. |
| 2 | PWD(WB), BUILDING WORKS, Page-34, Item-22 (ii) (a)( 3rd Corrigenda Addenda) Cement Concrete with 30mm down graded Shingles excluding shuttering.(II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6 proportion |
| 3 | PWD(WB), BUILDING WORKS, Page-26, Item-10(ii)( 3rd Corrigenda Addenda) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. In Ground Floor River Bazree |
| 4 | PWD(WB), BUILDING WORKS, Page-114, Item-1 © Wood work in door and window frame fitted and fixed complete including a protective coat of painting at the contact surface of the frame. At 1st floor.(The quantum should be corrected upto three decimals) Sal : Siliguri |
| 5 | PWD(WB), BUILDING WORKS, Page-123, Item-10(b)(iii) Z-batten shutter of door and window as per design having tongued and groove half lap joint as per direction of the E-I-C including fitting and fixing shutter in position,but excluding the cost of hinges and other fittings in 1st floor. B) Shutter with 19 mm thick planks 19 mm thick battens. Sisu, Gamar, Champ, Badam, Bhola, Morga, Hallak |
| 6 | PWD(WB), BUILDING WORKS, Page-189, Item-1(i)( 3rd Corrigenda Addenda) Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor). b) With 4:1 cement mortar i) 10 mm. thick plaster - Lum Sum ( Details in bill ) |
| 7 | PWD(WB), BUILDING WORKS, Page-48, Item-6 (i) ( 3rd Corrigenda Addenda) Artificial stone in floor,dado, staircase etc. with cement conctrete (4:2:1) with stone chips laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg./sq.m. all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted) with ordinary cement. In 1st floor. 20 mm. Thick |
| 8 | PWD(WB), BUILDING WORKS, Page-140, Item-4© Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) 40 mm.x 6 mm. 125 mm. length. |
| 9 | PWD(WB), BUILDING WORKS, Page-141, Item-8 Iron socket bolt of approved quality fitted and fixed complete. 100 mm long x 10 mm dia bolt |
| 10 | PWD(WB), BUILDING WORKS, Page-145, Item-28 Anodise aluminium Aldrop/Sliding bolts of approved quality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete. 250 mm x 16 mm dia. bolt |
| 11 | PWD(WB), BUILDING WORKS, Page-145, Item-30 Anodised aluminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete:. With continuous plate base (hexagonal/round rod) 125 mm grip x 10 mm dia rod |
| 12 | PWD(WB), BUILDING WORKS, Page-140, Item- 5 Iron butt hinges of approved quality fitted fixed with steel screws, with ISI mark. 100 mm x 50 mm x 1.25 mm |
| 13 | PWD(WB), BUILDING WORKS, Page-192, Item-15 Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 14 | PWD(WB), BUILDING WORKS, Page-104, Item-13(i) ( 3rd Corrigenda Addenda) (a) M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows ,railing etc. fitted and fixed with necessary screws and lugs in 1st floor. Grill weighing above 10 kg./sq.m.and upto 16 kg / sq.m. |
| 15 | PWD(WB), BUILDING WORKS, Page-197, Item-15 Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\\"s specification:i) In Ground floor : b) Two coats |
| 16 | PWD(WB), BUILDING WORKS, Page-200, Item-1(b) Priming one coat on timber or plastered surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc. |
| 17 | PWD(WB), BUILDING WORKS, Page-200, Item-1(a) Priming one coat on steel or other metal surface with synthetic oil bound prinmer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | PWD(WB), BUILDING WORKS, Page-200, Item-2(a) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) ) Lum sum ( Details in bill ) |
| 19 | PWD(WB), BUILDING WORKS, Page-200, Item-2(a) (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. including using of approved putty etc. on the surface, if necessary.(b) On steel or other metal surface: With super gloss (hi-gloss) iv) Two coats (with any shade except white) - Lum sum ( Details in bill ) |
| 20 | PWD(WB), BUILDING WORKS, Page-81, Item-9 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet |
| 21 | PWD(WB), BUILDING WORKS, Page-81, Item-10 Galvanised Iron sheet ridging fitted with necessary bolts screws,, washers, etc complete (225 mm end lapping) 300 mm. lapping each way a) With 0.60 mm thick sheet |
| 22 | PWD(WB), BUILDING WORKS, Page-11, Item-8 Taking out carefully GCI or CI or Asbestos sheets (including Ridges etc.) from roof or wall after unscrewing bolts nuts screws etc. and stacking the materials at site as directed. |
| 23 | Supplying fitting and fixing of Signboard and cost of photograph (payment will be made as per voucher) |
| 24 | Add:- GST @ 18% |
| 25 | Add:- Labour Welfare Cess @ 1% Please Enable Macros to View BoQ information |
