|
| 1 | 1.Construction of Aunganwadi Building at Kothalakuttai Village Near PUP School Campus H/O Batlapalli Estimate Amount : 17.25 Lakhs |
| 2 | Earth work excavation for foundation in all class of soils except hard rock requiring blasting including cost and conveyance of all etc.,complete |
| 3 | Supply and Filling of River Sand including cost and Conveyance of all site etc. Complete. |
| 4 | Supply and Filling the basement Excavated earth other than sand including cost and Conveyance of all site etc. Complete. |
| 5 | Cement concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers |
| 6 | Cement concrete 1:2:4 Using 20mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers |
| 7 | Brick work using country bricks of size 83/4\\"x41/4\\"x23/4\\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. . |
| 8 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 9 | Centering For BGL |
| 10 | For Column |
| 11 | For Lintel & Roof level Beam |
| 12 | Sunshade |
| 13 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs |
| 14 | Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS |
| 15 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 16 | Plastering with CM 1:4, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. |
| 17 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 18 | Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses |
| 19 | Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth |
| 20 | Paving the floor with coloured joint free virtified tiles of size 600x600x8mm of best quality and approved variety complying/conforming ISI specification land over cement mortar 1:3(one of cement and three of sand) 20 mm thick and pointed with same colour cement neatly etc., all complete |
| 21 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 22 | Dadooing of walls with colour glazed tiles of size 150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc |
| 23 | Providing the following thickness of Granolothic pattern floor finishing with plain cement concrete cc 1:2: 4 using 10 mm to 12 mm size hard broken stone jelly and the top rubbed smooth etc complete complying with standard specification |
| 24 | Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc |
| 25 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 26 | Supply and Cost of Steel door , Window, Ventilator |
| 27 | Door (0.75x 1.50m) D,Door (0.90 x 2.40m) D2,Door (1.10 x 2.40m) D3 |
| 28 | Windows (1.20 x 1.30m) |
| 29 | Ventilator (0.90x0.45m) |
| 30 | Jolly (0.60x0.45m) |
| 31 | Fixing Charges of Steel doors, windows and ventilators |
| 32 | For Door Fixing Charges |
| 33 | For Window Fixing Charges |
| 34 | Supply and fixing of Cuddappa Slab 40mm Thick including cost and Conveyance of all site etc. Complete. |
| 35 | Provision for Electrification |
| 36 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20 |
| 37 | Light Point |
| 38 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36 |
| 39 | Plug Point |
| 40 | Supply and run of 4x6 sqmm (84/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 68 |
| 41 | Service Wire |
| 42 | Supply and run of 4 X 6sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 73 |
| 43 | Gi Service Pipe |
| 44 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300w regulator with 300mm down rod on the existing clamp SD no 110 |
| 45 | 1200mm (48'') AC Celing Fan |
| 46 | Supply and fixing of CFL bulb SD no 80 |
| 47 | Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83 |
| 48 | Supply and fixing of Tube light SD 88 |
| 49 | Supply and fixing of Street light SD 94 |
| 50 | Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125 |
| 51 | Supply and fixing of 300mm 12\\" lightduty SD no 115 |
| 52 | Supply and fixing of DPI main switch SD no 115 |
| 53 | Provisions for EB service connection deposit charges |
| 54 | Provision of Water Supply & Sanitary arrangement |
| 55 | 1000 Ltr Tank |
| 56 | 32mm pvc pipe |
| 57 | 32mm pvc bend |
| 58 | 25mm pvc pipe |
| 59 | 25mm pvc Elbow |
| 60 | 25mm pvc Tee |
| 61 | 25mm x20mnm pvc Reducer |
| 62 | 20mm Tap |
| 63 | 110mm Pvc Pipe |
| 64 | 110mm Pvc Bend |
| 65 | 110mm Pvc Tee |
| 66 | 110mm PVC pipe cowl pipe |
| 67 | 110mm PVC pipe vent cowl pipe |
| 68 | PVC Nahini floor trap with pvc |
| 69 | Provision for RWH including pipes |
| 70 | Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 71 | Collection and supply of sand filling into the basement including cost and conveyance to the site and all labour charges. |
| 72 | Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications. |
| 73 | Collection and supply of filling the stones in soakpit including cost and conveyance of materials to the work site and all labour charges |
| 74 | 40mm Metal |
| 75 | 20mm Metal |
| 76 | Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 77 | Provisions for supply and fixing of precast RCC cover slab including cost and conveyance of materials and all labour charges |
| 78 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of \\"U\\" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 79 | Provision Of IWC |
| 80 | Provision Of EWC |
| 81 | Provision For Animation Drowing |
| 82 | Provision for writing Name board |
| 83 | Provision for Photo Charges |
| 84 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
