|
| 1 | Earth work in all soils except hard rock requiring blasting deploying earth moving machinery and tippers for forming benches and for raft foundation and transporting the surplus earth away from the site with a lorry lead of 0-2Km and then levelling including cost of all require materials, lead, lift etc., |
| 2 | Filling the low lying areas of the newly formed benches, foundation and basment of the quarters with the available excavated earth and with proper consolidation including cost of all required materilas, lead, lift etc., complete. |
| 3 | Transporting and disposal the available surplus earth away from the site with a lorry lead of 2.0Km and dumping into the lowlying area wherever found in Emerald camp and near by area, leveling and compaction including cost of all material, lead, lift, etc.,. |
| 4 | Providing Anti-termite treatment to the sub/adjacent soil of in three stages ( foundation, basement and alround the building ) by application of chemicals as per IS 63613 part I to IV in stages to suit the progress of work with approved/suitable chemicals and as per the detailed specification including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment, cost of chemicals, labour charges, transport and storing etc., complete and as directed by Engineer at site complete. |
| 5 | Providing PCC M15 grade using 20 mm HBG down graded metal and with minimum cement content of 240 Kg/m³ of concrete for foundation including cost of cement, all materials, labour, charges, curing, consolidation, all leads, lifts, as per standard specification, etc., complete using aggregates from Kurunthamalai & Mettupalayam. |
| 6 | Providing PCC M15 grade using 20 mm HBG down graded metal and with minimum cement content of 240 Kg/m³ of concrete for foundation including cost of cement, all materials, labour, charges, curing, consolidation, all leads, lifts, as per standard specification, etc., complete using aggregates from dumping yard. |
| 7 | Providing and laying tunnel muck as a base course for the raft foundation including labour charges , cost of material, transporting,laying and consolidating with power roller including cost of all labour, lead, lift, etc.,complete |
| 8 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for Raft foundation including cost of cement, all materials, labour, curing, vibration charges, all lead, lifts, with formwork and hacking the side after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from Kurunthamalai & Mettupalayam. |
| 9 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for Raft foundation including cost of cement, all materials, labour, curing, vibration charges, all lead, lifts, with formwork and hacking the side after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from dumping yard. |
| 10 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for Ground floor column including cost of cement, all materials , labour, curing,vibration charges,all leads, lifts,with formwork and shuttering charge and hacking the sides after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement. |
| 11 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for First floor Column including cost of cement, all materials , labour, curing,vibration charges,all leads, lifts,with formwork and shuttering charge and hacking the sides after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement. |
| 12 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for Plinth Beam including cost of cement, all materials, labour, curing, vibration charges, all leads, lifts, with formwork and hacking the sides after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement. |
| 13 | Providing RCC M25 for Ground floor Lintel, sill beam, and landing beam using 20 mm HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete including cost of cement, all materials, labour, curing, all leads, lifts, vibrating charges, with formwork and scaffolding arrangement and hacking the sides after deshuttering etc as per standard specification, complete but excluding cost of steel reinforcement. |
| 14 | Providing RCC M25 for First Floor Lintel, sill beam, and landing beam using 20 mm HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete including cost of cement, all materials, labour, curing, all leads, lifts, vibrating charges, with formwork and scaffolding arrangement and hacking the sides after deshuttering etc as per standard specification, complete but excluding cost of steel reinforcement. |
| 15 | Providing RCC M25 grade using 12mm to 20mm HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for Ground Floor sunshade, loft, cup-board slab, including cost of cement, all materials, labour, curing, all leads, lifts, with formwork, necessary scuffolding & structing and hacking the sides after deshuttering etc., as per standard specification, complete. but excluding cost of steel reinforcement. |
| 16 | Providing RCC M25 grade using 12mm to 20mm HBG machine crushed metal and with minimum cement content of 300 Kg/m³ of concrete for First Floor sunshade, loft, cup-board slab, including cost of cement, all materials, labour, curing, all leads, lifts, with formwork, necessary scuffolding & structing and hacking the sides after deshuttering etc., as per standard specification, complete. but excluding cost of steel reinforcement. |
| 17 | Providing RCC M25 grade using 12mm to 20mm HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for Ground floor Roof beam including cost of cement, all materials, labour, curing, all leads, and lifts, formwork necessary scaffolding and structing arrangement and hacking the sides after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement. |
| 18 | Providing RCC M25 grade using 12mm to 20mm HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for First floor Roof beam including cost of cement, all materials, labour, curing, all leads, and lifts, formwork necessary scaffolding and structing arrangement and hacking the sides after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement. |
| 19 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for Ground floor Roof slabs including cost of cement, all materials, labour, curing, all leads & lifts, vibrating charges, with formwork, necessary scaffolding and structing arrangements and hacking the bottom after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from Kurunthamalai & Mettupalayam. |
| 20 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for Ground floor Roof slabs including cost of cement, all materials, labour, curing, all leads & lifts, vibrating charges, with formwork, necessary scaffolding and structing arrangements and hacking the bottom after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from dumping yard. |
| 21 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for First floor Roof slabs including cost of cement, all materials, labour, curing, all leads & lifts, vibrating charges, with formwork, necessary scaffolding and structing arrangements and hacking the bottom after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from Kurunthamalai & Mettupalayam. |
| 22 | Providing RCC M25 grade using 20mm downgraded HBG machine crushed metal and by using minimum cement content of 300 Kg/m³ of concrete for First floor Roof slabs including cost of cement, all materials, labour, curing, all leads & lifts, vibrating charges, with formwork, necessary scaffolding and structing arrangements and hacking the bottom after deshuttering etc., as per standard specification, complete but excluding cost of steel reinforcement using aggregates from dumping yard. |
| 23 | Providing Vertical drop in Balcony by bent down the extened main rods of roof slab to a depth of 500mm and tying with 6mm cross Rods over that and plastered with CM 1 : 3 over the chicken mozh including cost of all materials leads and lifts etc, complete. |
| 24 | Providing reinforcement using RTS/MS rods of Fe 500 grade for all RCC works, including cost of steel, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete. |
| 25 | Brick work in C.M. 1:5 for Ground floor using Fly Ash bricks of size 230X 110 x 70mm including cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete. |
| 26 | Brick work in C.M. 1:5 for First floor using Fly Ash bricks of size 230X 110 x 70mm including cost of cement, all materials, labour, curing, all leads and lifts, as per standard specification, etc., complete. |
| 27 | Brick work in C.M 1:3 for Ground floor using Fly Ash bricks of size 230 x 110 x 70 mm including cost cements, all materials, labour, curing, all leads and lifts, as per standared specification, etc complete. |
| 28 | Brick work in C.M 1:3 for First floor using Fly Ash bricks of size 230 x 110 x 70 mm including cost cements, all materials, labour, curing, all leads and lifts, as per standared specification, etc complete. |
| 29 | Providing RCC M15 grade using 20mm HBG metal and by using minimum cement content of 240 Kg/m³ of concrete for floor slab including cost of cement, all materials, labour charges, curing, consolidation, all leads, lifts, as per standard specification etc., complete. |
| 30 | Plastering with CM 1:3 mix 10 mm thick for ceiling, sunshade,loft, etc., including cost of materials, labour, lead, lift, curing scaffoling arrangements, etc., complete. |
| 31 | Plastering with CM 1:5 mix 12 mm thick for the inner & outer walls including cost of cements, all materials, labour, curing, lead, lift, scaffolding arrangements, etc., complete. |
| 32 | Finishing interior wall with wall care putty finish with two coats white cements materials including cleaning the wall surface using brush, stone etc. and as directed by the engineer at site. |
| 33 | Paving the floor with best quality fully Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade, quality and make of kajaria/Nitco/somany and laid in cement mortar 1:3 of 20mm thick and top pointed with the white cement mixed same colour pigments including cost of tiles,cement,labour charges, all lead and lift etc. complete complying with standard specification. |
| 34 | Dadooing walls with approved quality,size and design of Glazed tiles of approved make of Kajaria/Nitco/Somany laid in cement mortar 1:2 of 10mm thick including pointing with same coloured cement finishing the joint and pointing flush with the surface ,including cost of tiles, cement, labour charges including cost of all materials, labour, lead, lift, etc. complete. |
| 35 | Dadooing wall with decorative tiles for elevation purpose of approved quality make of Kajaria / Nitco / Somany and colour in cement mortor 1:3 20mm thick and pointing with white cement mixed with colouring pigments to full depth of tiles perfectly and neat finished the joints including cost of tiles, labour charge, all materials lead and lift etc., complete. |
| 36 | Flooring with non slippery ceramic tiles of approved make of Kajaria / Nitco/ Somany, colour and size, laid over 20 mm thick cement mortor 1:3 including cutting the tiles to the required size special cutter wherever necessary, laying in position and pointing with white cement mixed with colour pigments including cost of tiles, cement, labour charges, all materials, all lead and lift etc., complete complying with standard specification. |
| 37 | Supplying, laying and fixing of Granite slab with Nosing as directed by department Engineer & Jet Block (Super fine Polished with Machine cut Edges of size 4' x 2' and above 18mm to 20mm thick) of approved quality, colour, size, design and of reputed make and pointed with the same coloured cement including cost all materials, labour, cleaning the top so as to give a glossy finish, lead and lift, etc., complete. |
| 38 | Supplying and laying with one course of decorative terrace roofing tiels for the sloped roof using cement mortor 1:3 bed of suitable thickness mixed with crude oil at 10% by weight of cement and pointing with same oiled mortor including cost of all material, lead, lift,etc. complete., |
| 39 | Sand filling in basment and consolidation as per standard specification including , labour, lead , lift, etc., complete using aggregates from Kurunthamalai & Mettupalayam. |
| 40 | Sand filling in basment and consolidation as per standard specification including , labour, lead , lift, etc., complete using aggregates from Dumping yard. |
| 41 | Painting the ceiling with two coats of interior emulsion of Asian/Berger/Nerolac make and of Superior quality over a primer coat of approved colour including cost of paint, primer, other materials, labour charge, lead and lift, etc., complete. |
| 42 | Painting the inside and outside of the building with two coats of exterior and interior emulsion paint of Asian/Berger/Nerolac make and of Superior quality approved colour over a primer coat of all materials, labour charges, lead and lift, including cleaning the wall surface etc., complete. |
| 43 | Supplying, fabrication and fixing in Position of MS Grill using MS flat/MS square rods of required size including cost of materials, labour, lead, lift etc,complete as per approved Drawings complete. |
| 44 | Painting with two coats of approved enamel paint over one coat of primer for all M.S grills of window and ventilator etc. including cost of all materilas,labour ,lead and lift etc. complete. |
| 45 | Supplying and fixing in position of single leaf Solid core filush door exterior grade of size 1.50x2.10m of special type using Skin wood as per following specifications.1) The door frame is made out of Country wood of size 100x75 mm with carving works as per design and provided with necessary hold fast arrangements.2) The door shutter frames are made with Skin frame of size 125x35 mm. 3) shutter panels with 35 mm thick. Skin planks with ornamental carving works as per design. 4) Brass fittings of I.S.I standard such as butt hinges of size 150 mm 4 nos per leaf 5) 300x200 mm brass aldrop 1 no per door 6) 250 mm brass handle 2 nos per door 7) 300x12 mm brass tower bolt 1 no per door etc and both side laminated finish.The rate is inclusive cost of all materials, funiture fittings, labour charges for carving,wrought and put up,polishing, conveyance, fixing,all taxes etc, complete. |
| 46 | Supplying and fixing in position of single leaf Solid core filush door exterior grade of size 1.0x2.10m of special type using Skin wood as per following specifications. 1) The door frame is made out of Country wood of size 100x75 mm with carving works as per design and provided with necessary hold fast arrangements. 2) The door shutter frames are made with Skin frame of size 125x35 mm. 3) shutter panels with 35 mm thick .Skin planks with ornamental carving works as per design. 4) Brass funitur fittings of I.S.I standard such as butt hinges of size 150 mm 4 nos per door. 5) 300x200 mm brass aldrop 1 no per door, 6) 250 mm brass handle 2 nos per door, 7) 300x12 mm brass tower bolt 1 no per shutter etc are provided and both side laminated finish.The rate is include cost of all materials, funiture fittings, labour charges for carving,wrought and put up,polishing, conveyance,fixing,all taxes etc, complete. |
| 47 | Supply and fixing of solid UPVC door (Un-Plasticized Polyvinyl Chloride) with outer frame of 60x55mm size and with an outer wall thickness of 2.4mm with necessary reinforcement as per standars specification with all hardware fittings such as friction stays, handle and aldrops etc... including cost of all materials, fixing charges lead, lift etc., as per standard specification complete. |
| 48 | Supply and fixing in position casement type of UPVC (Un-Plasticized Polyvinyl Chloride) Windows with outer frame 60x58mm and shutter profile are reiforced with GI/1mm 125GSM and 100% corrosion free the profiles are multi chembered sections with wall thick of 2mm. Radions free pin headed plain or brown colour glasses 4mm thick should be provided to the shutter. The connecting mechanism between sash and outer frame that enables opening of the window including cost of all materials, locking arrangements ,labour,lead,lifts etc complete. |
| 49 | Supplying and fixing of UPVC louvered Ventilator reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm, Radianons free pin headed glass 4mm thick should be provided in the louvers including cost of all materials, labour, lead, lift etc as per standard specification complete. |
| 50 | Supplying and fixing in positon of IWC (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and make of Nycer/Parryware/kerovit with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2.5 of 100mm thick, including cost of closet, cost of all materials, labour charges, all lead and lift etc. complete. |
| 51 | Supplying and fixing in positon of Floor rest EWC of size 630x360x730mm white glazed earthern ware of approved quality and make of Cera/Parryware/kerovit with flushing sistern including S trap 300/400 mm confirming to BIS including cost of closet, all materials, labour charges, all leads and lifts etc. complete. (12.5 litre capacity) |
| 52 | Supplying and fixing approved quality and make of cera / parryware / kerovite white glazed earthen ware Hand wash basin of size 550mm X 400mm with all accessories such as cast iron brackets,32mm dia CPVC pipes with 15mm dia CP angle valve ,15mm dia nylon connection,15mm dia Brass nipples,15mm C.P piller tap,including cost of all materials, labour charges , lead and lift etc. complete, as per standard specification. |
| 53 | Supplying and fixing in position best quality approved make white S.S sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works] |
| 54 | Supplying and fixing of chromium coated towel rod 600mm long and 20mm dia with brackets wherever required and as directed by the engineer at site including cost of all materials, labour lead, lift etc complete. |
| 55 | Supplying and fixing in position of ready made PVC water tank 1000 litre capacity, Sintex or equivalent make (Triple layer) including cost of cover, with opening for inlet, outlet & over flow pipe, Transporting and cost of all materials, labour, lead, lift, etc. complete. |
| 56 | Supplying and fixing in position of 40mm dia UPVC pipe (class1 SDR 11) of approved make (Finolex/ Supreme/ Ashirvad/Astral) on wall/ open including required specials such as UPVC Tee, elbow, bend etc.& cost of all materials, specials, cutting, threading, jointing, clamps, screws, labour, lead, lift, etc. complete. |
| 57 | Supplying and fixing in position of 20mm dia UPVC pipe (class1 SDR 11) of approved make (Finolex/Supreme/ Ashirvad/ Astral) on wall/ open including required specials such as UPVC Tee, elbow, bend etc.& cost of all materials, specials, cutting, threading, jointing, clamps, screws, labour, lead, lift, etc. complete. |
| 58 | Supplying and fixing in position of 20mm dia CPVC pipe UPVC pipe (class1 SDR 11) of approved make (Finolex/Supreme/ Ashirvad/ Astral) on wall/ open including required specials such as UPVC Tee, elbow, bend etc.& cost of all materials, specials, cutting, threading, jointing, clamps, screws, labour, lead, lift, etc. complete. |
| 59 | Providing and fixing 12mm cromium plated long body half turn brass tap including cost of pipe and labour fixing charges lead, lift, etc., complete, as per standard specification. |
| 60 | Supplying and fixing position SS Nahani Chilli Trap (Cockroach guard) of size 100 x 75mm with best quality of stainless steel gratings of approved brand, fixed over floor tile by cutting the tile and placing in correct position including cost of all materials labour charges,all lead and lift etc., complete. |
| 61 | Supplying and fixing in position of Chromium coated hand rail of 75mm pipe to height of 1000 mm and support of 25mm above square/round including cost of all materials, labour, lead, lift, T&P etc. complete as directed by department Engineer at site. |
| 62 | Supplying and fixing of 110mm dia, best quality ventilating shaft 3.00m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lift etc., complete. |
| 63 | Supplying and fixing of 110mm dia, best quality PVC pipe of 6kg/cm2 for sewer line top and fixing in poistion inlcuding cost of all materials, labour, leads and lift etc., complete. |
| 64 | Supplying and fixing of 75mm dia, best quality PVC pipe of 6kg/cm2 for sewer line top and fixing in poistion inlcuding cost of all materials, labour, leads and lift etc., complete. |
| 65 | Supplying, laying and fixing of GI (3\\" pipe - B Class) best quality for approved manufacturer including cutting, threading, joining with necessary GI specials including cost of all materials, labour, lead, lift etc. Complete over main line. |
| 66 | Supplying, laying and fixing of GI (2\\" pipe - B Class) best quality for approved manufacturer including cutting, threading, joining with necessary GI specials including cost of all materials, labour, lead, lift etc. Complete over main line. |
| 67 | Supplying and fixing in position of 20mm Gun metal gate valve of quality and approved variety of gun metal gate/ wheel valve of the following sizes with ISI mark,cost of shellac, thread etc. including labour for cutting, therading, jointing, clamps, screws, lead, lift etc. complete complying with standard specification for both internal and external water supply arrangements. |
| 68 | Supplying and fixing in position of 50mm Gun metal gate valve of quality and approved variety of gun metal gate/ wheel valve of the following sizes with ISI mark,cost of shellac, thread etc. including labour for cutting, therading, jointing, clamps, screws, lead, lift etc. complete complying with standard specification for both internal and external water supply arrangements. |
| 69 | Supplying and fixing in position of best quality mirror (22\\" x 16\\") with aluminium frame over wash basin including cost ofall materials labour, lead, lift, etc, complete as directed by the engineer at site. |
| 70 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connections in suitable angle iron frame work with PWD earthing. |
| 71 | Supplying and Wiring for lights & fans with 2 x 1.50 sq mm PVC unsheathed multistrand copper cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light/fan point etc., complete, as per standard specification. (SD-1) |
| 72 | Supplying and fixing of 1200mm (48\\") sweep AC ceiling Fan make of Cropmton / Bajaj / Havells complete with stepped electronic 300W regulator with 1 metre down rod with fan clam with side plates and cross arms of size 450mm (18\\") including cost of labour, lead, lift, etc., complete. (SD - 106) |
| 73 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point and making good the damaged portion of masonry of PVC concealed plug point, etc., complete, as per standard specification. (SD - 38) |
| 74 | Wiring for 15 Amps 3 pin plug points with 2x4 sqmm(56/0.3) PVC unsheathed multistrand copper cables of 1100V Grade in suitable PVC rigid pipe concealed wall and ceiling with PVC Accessories in flush with well using 150x100x113mm TW switch box with 3 mm thick hylum sheet covers for 15A/ 3 Pin non inter locking CS plug including Pin top with continuous earth wire connection using14SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point etc., complete, as per standard specification (SD - 40) |
| 75 | Supply and fixing of single box type 4'40 W LED fitting of make Philips/Havels complete with electronic ballast with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting including cost of all materials lead and lift etc,.. complete.(SD-88) |
| 76 | Supply and fixing of 4'40 W LED street light fitting of make Philips / Havels complete with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI Bend complete on the existing post / wall plate with PVC unsheathed Cu. leads, with MS clarnps and aluminium painting. including cost of all materials, labour, lead, lift etc. complete, as per standard specification. (SD-94) |
| 77 | Supply & Fixing of AC / DC call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW Board with push switch in respect of tenements including cost of all materials, labour, lead, lift etc complete. (SD-105) |
| 78 | Supplying and fixing 300 mm AC exhaust Fan (Light duty) make of Crompton / Bajaj / Almonard including providing necessary holes with wall labour, fixing charges, lead, lift, etc., complete, as per standard specification. (SD-114) |
| 79 | Supplying and fixing 450 mm AC exhaust Fan (Heavy duty) make of Crompton / Bajaj / Almonard including providing necessary holes with wall labour, fixing charges, lead, lift, etc., complete, as per standard specification. (SD - 118) |
| 80 | Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm with salt, charcoal, Bentonite Powder, etc., complete, as per standard specification. (SD-222) |
| 81 | Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-666) |
| 82 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2feetx1-1/2feet using angle iron of size1-1/2\\"x1-1/2\\"x1/4\\"rigidly fixed on wall covered with hylem sheet of size 2feetx1/2feet of 6mm thickness with necessary bolt sand nuts support sand supply and fixing of 3Nos. 63A fuse units (500V),1No.neutral link, copper earth flat of size1\\"x1/4\\"with inter connection of EB meter to fuse unitsby16Sq.mm PVC insulated copper wire with 1No 63Amp 30MA Four Pole RCD/RCCB (HigherEnd) with suitablenecessary connection with earth connection complete (SD-131) Please Enable Macros to View BoQ information |
