Tender For (I) Construction Of Control Room Building With Electrification, Providing Bore Well, Cable Duct, Culvert, Transformer & Structural Plinth, Reinforced Cement Concrete Road, Reinforced Cement Concrete Retaining Wall, Metal Spreading, Chain L, Coimbatore-Tamil Nadu

TDR : 54430152

Tender Notice
BOQ

16 Days Left

Coimbatore , Tamil Nadu

Tender Brief : Tender For (I) Construction Of Control Room Building With Electrification, Providing Bore Well, Cable Duct, Culvert, Transformer & Structural Plinth, Reinforced Cement Concrete Road, Reinforced Cement Concrete Retaining Wall, Metal Spreading, Chain L

Document Fees
Refer document

EMD
₹ 504500.0 /-

Tender Value
Refer document

Submission Date
23-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Schedule I (Civil Works)
2	Schedule II (Electrical works)
3	Applicable GST Amount (Total GST Amount @18%)
4	Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.
5	Earth work excavation for foundation in HGS and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders including cost of all lead lift labour charges etc complete
6	Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting including cost of all lead lift labour charges etc complete
7	Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in Medium Rock and Dense Medium Rock not requiring blasting including cost of all lead lift labour charges etc complete
8	Earth work excavation for Foundation in Hard rock by Wedging and Chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including cost of all lead lift labour charges etc complete
9	Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.
10	Filling the M sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification (watering & consolidation with all leads and lifts etc., complete.
11	Plain cement concrete in CC 1:3:6, using 20 mm HBG metal, for foundation / Padding Concrete excluding form work including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.
12	Plain cement concrete in CC 1:2 :4 using 20mm HBG metal with out form work, including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.
13	Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Footing including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
14	Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering for RCC Column as per Standard Specification. (But excluding cost of steel reinforcement.)
15	Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Grade and Plinth Beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
16	RCC in CC 1:1 1/2:3, mix using 12 to 20 mm HBG machine crushed metal for Tie beam including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)
17	Reinforced cement concrete in C.C. 1:1 ½ :3 mix, using 12 to 20mm HBG machine crushed metal, for Cable duct cover slab and Culvert cover slab with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)
18	Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification
19	Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.
20	Supplying and filling in gravel including material cost , filling charges as per standard specification (watering & consolidation) with all leads and lifts as per standard specification, etc., complete.
21	Providing form work for plinth for above ground level including cost of all materials, labour charges leads, lifts, as per standard specification etc., complete.
22	Brick work in C.M. 1:5 using chamber burnt class II bricks, for Basement & superstructure including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.
23	Brick work in C.M. 1:3 using chamber burnt class II bricks, for water storage sump in below ground level including, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.
24	Supplying and fabricating of template and Labour charges for fixing template for plinth
25	Labour charges for fabrication of grouting bolt 20 mm dia bolt and nut
26	Labour charges for fabrication of grouting bolt 25 mm dia bolt and nut
27	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Loft including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
28	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Lintel including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
29	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sunshade 800mm wide including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
30	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Sunshade 600mm wide including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
31	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof Beam including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
32	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof Slab 130mm Thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
33	Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Roof Slab 100mm Thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
34	RCC 1:1.5:3 using 12 to 20mm HBG metal for sump wall including cost of cement, all materials, labour curing, vibration, including cost of all leads, lifts as per standard specification
35	Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification
36	Supplying and fixing in position G.I chain link fencing with vertical post 75x75x6mm and fixing with flates including cost of wicket gate for LAS including all leads ,lifts ,etc complete
37	Suppling , fixing and Labour charges cutting GI/MS angle and fixing in cable duct in proper alignment including labour lead lift etc,complete.
38	Labour charges for transporting all cable duct cover slab in the work site and laying over the cable duct in proper alignment including labour lead lift etc,complete.
39	Weathering course over roof slab with PCC 1:2:4 using 6mm chips and cement mortar in the ratio of PCC 1:2:4 to an average thickness of 100mm and to required slope and providing one course of Cool roof tiles of size 305x305x7 mm set in C.M 1:3 mixed with crude oil 10% by weight of cement and pointing with CM 1:3 mixed with crude oil. (including water proofing treatment over roof to prevent leakage)
40	Plastering with CM 1:3, 12 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
41	Plastering with CM 1:5, 12 mm thick for Wall surface including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
42	Supply and fixing of 90lbs rails in transformer plinth including cost of material and fixing charges etc complete
43	Supplying and spreading 100 mm tk of 20 mm metal over crusher dust of 100 mm thick
44	Supplying and spreading 100 mm tk of 40 mm metal over crusher dust of 100 mm thick
45	Floor finsinhing with CM 1:3, 12 mm thick over PCC 1:3:6. using 20 mm metal, 100 mm thick for Store room including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
46	Providing projector border 20 cm width in CM 1:3 20mm thick including cost of all materials, labour, curing, leads and lifts etc., complete.
47	Providing Projector border 7.5cm width in CM 1:3 20mm thick including cost of all materials, labour, curing, leads and lifts etc., complete.
48	Supply and fixing in position of anodised Aluminium fully glazed door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608 Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm @ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.00 x 2.10 m
49	Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) slided Windows of required section with Shutter inner lock glazing clips rubber gaskets sliding wheel & 5 mm thick plain glass Panelling including cost of all materials, locking arrangement, labour, lead, transport, lead, lift etc., complete.
50	Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) Ventilator size 0.60 X 0.45 m fully glazed Lover type as per standard specifications with frame and frosted glass 4 mm thick including coast of all materials, labor, lead, lift etc., complete.
51	Supplying and fixing of PVC Doors with a size of 0.800 X 2.00 m for the replacement of existing available corroded / damaged Doors in Bath & WC rooms with Heavy duty as approved by the concerned including Doors outer frame, furnitures, transporting, fixing etc., complete
52	Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6\\" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,
53	Supplying and fixing Windows (4 leaves) of approved size using 35x35x5mm MS Angle for outer frame 25x25x3mm Angle for shutter frame with shutter 18 Gauge MS Sheet of bottom panel and top panel with 12 mm thick glass, fixing 12mm MS Rods horizontally (11 Nos.) with necessary locking Arrangements, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour for fabricated steel work including cost of all materials labour leads, lifts etc., complete.
54	Supplying and fixing MS grills for windows ,ventilators ,gates MS angle Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead and lift etc., complete.
55	Supplying and laying of Non - slippery type Vetrified tiles for Control Room etc., of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg/m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.
56	Supplying and laying of non-slippery tiles of 300 x 300 x 8mm of approved ISI mark of best quality & colour laid in CM 1:2, 20mm thick, and pointing with white cement using 0.40 Kg/m2 including finishing the joint and pointing flush with tiles surface, including cost of cement, all materials, labour, curing, all leads and lifts etc., complete as per standard specification.
57	Dadooing wall with glazed tiles of approved colour of required size with 6 mm thick of approved quality laid in CM.1:2 ,12 mm thick after scrapping & cleaning the existing wall surface as instructed and pointing with white cement using 0.40Kg / m2 including finishing the joint and pointing flush with tiles surface including cost of cement all materials labour curing , leads lifts etc., as per standard specification complete.
58	Flooring for staircase/steps with granite slabs super fine polished with machine cut edges 18 mm to 20 mm thick, including required edge nosing to suitable for steps - Ruby red or Raw silk, including cost of all materials, lead, lift,labour, etc., complete.
59	Supplying and laying of Acid Proof Tiles for Battery Room of approved quality and colour laid in CM. 1:2 , 12 mm thick and pointing with white cement using 0.40Kg/m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.
60	Supplying and fixing white glazed earthen ware (Indian type) water closet of size 20\\" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.
61	Supplying and fixing white glazed earthen ware (European type) water closet of size 20\\" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.
62	Supplying and filling at 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.
63	Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.
64	Supplying and Laying of 110 mm dia. PVC pipe (6Kg/Cm2) for Sewage line from Septic Tank to Dispersion Trench including cost of all materials, labour, lead, lift etc., complete.
65	Supplying Godrej Navtal lock of approved type with 6 livers including cost of locks with three keys leads, lead etc., complete.
66	Supplying and Fixing of Floor Trap 100 X 50 mm in size for Bath room including cost of materials, lead, lift etc., complete.
67	Supplying and fixing white / Colour glazed earthen ware wash basin of size 550 X 440 mm in size reputed make with Gate valve including cost of all fitting materials lead lift Transporting labour charges etc., complete.
68	Supplying and fixing of Best quality of Mirror 600 X 450 mm in size with soap tray, Towel rod over hand Wash basin,Plastic bucket ,mug, Dust Bin and floor mat, etc.,complete.
69	Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.
70	Colour washing with two coats off inside wall using interior emulsion paint over a primer one coat and two coat of wall putty paste of approved quality interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, Labour, Lead, Lift etc., complete.
71	Painting with 2 coats of using emulsion paint over primer coat with white colour for Interior ceiling surface including cost of all materials, labour, lead, lift, brush, etc., complete.
72	Painting 2 coats of Acid Proof Paint over 1 coat of Cement Primer including cost of all materials, labour, lead, lift etc., complete.
73	Supplying and fixing of 40 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete
74	Supplying and fixing of 25 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete
75	Supplying and fixing of 20 mm PVC pipes (10 kg/cm2) with ISI make for water supply arrangements including cost of pipe, bend, Tee, elbow, reducer etc., as required of all materials,lead,lift,labour charges etc.,complete
76	Providing and fixing 15 mm C.P.Pillar cock for water supply tap with angle stand including cost of pipe and labour fixing charges lead, lift etc., complete.
77	Supplying and fixing of 40 mm GM gate valve with ISI make for PVC water supply arrangments including cost of pipe, bend , tee,elbow, reduceretc., required of all materials, lead,lift,labour charges metc.,complete.
78	Supplying and fixing of 25 mm GM gate valve with ISI make for PVC water supply arrangments including cost of pipe, bend , tee,elbow, reduceretc., required of all materials, lead,lift,labour charges metc.,complete.
79	Supplying and fixing GI angle size of (50mmx50mmx6mm) fixing at 600 m C/c for cable duct inside the control room including all labour,lead,lift etc.,complete.
80	Supplying and Laying of 110 mm dia (4 Kg/cm2) PVC pipe for Rain water down fall pipe including cost of all materials, labourm lead, lift etc., complete.
81	Supplying and fixing of C I man hole cover heavy duty of approval quality size 600 x 600 mm to cover the man hole including cost of all materials, lead, and lift, etc., complete.
82	Supplying and fixing of double side Polished Cudappah Slab 20/30mm thick for Shelves rack including cost of all materials, Labour, lead, lift etc., as per standard Specification complete.
83	Supplying and fixing of 1000 Liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection , lead, lift etc., complete, as per standard specification
84	Charges for geophysical survey for investigation of bore well point at various point in the SS site and to fix the maximum yield point with necessary instrument including labour lead,lift,etc,complete
85	Drilling of 150 mm dia. Bore well upto 200m in all classes of soil using Power drilling machine including transporting of drilling machine, fixing in position including all labour, lead, lift etc., complete.
86	Drilling of 150 mm dia. Bore well above 200m in all classes of soil using Power drilling machine including transporting of drilling machine, fixing in position including all alabour, lead, lift etc., complete.
87	Supplying and fixing of 180 mm dia. PVC casing pipe of best quality by ISI make of heavy duty and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
88	Supplying and fixing of 20 mm dia. HDPE pipe best quality by ISI make of 10 Kg / cm2 Pressure and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
89	Supplying and fixing of 40 mm dia. HDPE pipe best quality by ISI make of 10 Kg / cm 2 Pressure and suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
90	Supplying and fixing of 12/15 mm dia. \\" B \\" class GI pipe best quality by ISI make including cost of all materials, lead, lift, fixing charges etc., complete.
91	Supplying and fixing of 180 mm dia. PVC End cap of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
92	Supplying and fixing of 20 mm dia. MS Collar for Air Hose pipe of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
93	Supplying and fixing of 40 mm dia. MS Collar for Air Hose pipe of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
94	Supplying and fixing of 53 mm dia. GI Elbow for Water connection of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
95	Supplying and fixing of 53 mm dia. GI Union for Water connection of best quality by ISI make suitable for 150 mm dia. Bore well including cost of all materials, lead, lift, fixing charges etc., complete.
96	Supplying and Fixing of 1 No. GI cover Box to required size for accommodate the Temporarily supply Meter & Main Board with nececessary clamps etc., complete.
97	Supplying and erection of 7.5 HP capacity ELGI make Bore Well Compressure Pump with STD accessories with Suguna or TEXMO Motor 7.5 HP, 3 phase 1440 RPM TEFC - a class Motor BCH Starter (L&T make) icluding cost of all materials such as CW Board suitable for fixing starter etc., Indiacator bulb, switch Holders, Earth plate, IC unit and Aerial carrier and PVC copper wire reputed make for wiring labour, lead and fixing charge etc., complete.
98	supply and erection of 2 HP Monoblock pump for sump to drain out water including cost of suitable GI suction and delievery pipes, cover for motor, wiring, all labour, lead, and lift etc., complete.
99	Supplying and run of 1.5 sq mm (22/.3) PVC inslated multistand unsheathed copper conductor or 1100 V grade (SD 53)
100	Supplying and fixing of ISI make 4 way Triple pole and natural MCB Distribution Board with 1 No. 6 to 32 Amps DP IC Switch of 500V, As incoming 6 Nos. 6 to 32 Amps SPMCB out going necessary flush with wall and making good of cancelled portion with earthing as per PWD standard arrangement.
101	Wiring with 1.50 sq mm PVC unsheathed multistrand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point.
102	Wiring with 1.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.
103	Wiring with 4.00 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.
104	Supplying and fixing of Slanding Holder with LED 15 W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.
105	Supplying and fixing of Twin type Decorative type Led Tube 4' 16W fittings with Copper choke & slim type LED tube and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
106	Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
107	Supplying and fixing 1200mm (48\\") sweap AC ceiling fan with 600mm down rod with approved best quality make of standard specification with electronic regulators and switch, including cost of all materials Labour fixing charges etc., complete.
108	Supplying and fixing of 450 mm AC Sweap AC Exhaust Fan Heavy duty including Providing necessary hole in wall, fixing charges, lead, lift etc., complete.
109	Supplying and fixing of single box Street light type with LED 30 W light fittings with ISI mark with GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
110	Supply and fixing of fancy glass shade and 11 W LED for BH point including cost of all materials, lead, lift, fixing charges etc., complete.(SD 80)
111	Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 11 W LED bulb including cost of all materials, lead, lift, fixing charges etc., complete.
112	Supplying and fixing of Earthing with Electrode of 2 mtr. class B GI Pipe less than 32 mm dia. complete.
113	Supplying and fixing of 32 Amps 3 phase DPIC Main Switch of approved ISI make with suitable board, clamp etc., including cost of all materials, labour, lead, lift etc., complete.
114	Providing 3 Phase Service connection by using with 7/20 Copper cable of from EB Post to Meter Board complete.
115	Providing 32 Amps 3 Phase Aerial fuse connections complete.
116	Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.
117	Supplying & stick the TNEB Embelem in front of control room entrance door including cost, lead, lift, etc. complete, as per standard specification.
118	Supplying of steel executive table of TANSI make or equivalent as per standard specification 54''x 30''x30'' including the ost of steel table, labour charges, transporting charges , lead , lift etc complete
119	Supplying of steel S type chair with arm of TANSI make or equivalent as per standard specification including the cost of chair, labour charges, transporting charges , lead , lift etc complete
120	Supplying and fixing, and testing of 25 mm dia PVC including cost of all materials labour lead lift etc complete.
121	Supplying and fixing, and testing of 40 mm dia PVC pipe including cost of all materials labour lead lift etc complete
122	Supplying and fixing 25 mm dia GM gate valve ISI Make including cost of all materials labour lead lift etc complete
123	Supplying and fixing 40 mm dia GM gate valve ISI Make including cost of all materials labour lead lift etc complete
124	Providing fixing 12mm screw down bib cock including cost of all materials labour lead lift etc complete
125	Supplying and fixing of 65mm dia GI pipe 'B' class including cost of all materials labour lead lift etc complete
126	Providing fixing of 25 mm dia GI union including cost of all materials labour lead lift etc complete
127	Providing fixing of 40 mm dia GI union including cost of all materials labour lead lift etc complete
128	Supplying and fixing of RCC Collar 600mm dia and 300mm depth including cost of all materials labour, lead, lift, etc.,complete.
129	Providing, laying and spreading wet Mix macadam using graded stone aggregates and premixing the materials with water at OMC in mechanical mix plant and transporting the materials by tipper to site, laying in uniform layers with pavers as sub base/Base course over the well prepared surface and compacting with vibratory roller to achieve the desired density including the cost of materials, labour charges, rentals for machinery fuel and all other incidental charges etc., complete.
130	Provision for Form work on surface for various PCC/RCC works including cost of all materials labour lead lift etc complete.
131	Providing GI equal angles 75x75x8 MM as fencing post with 2 Nos of 150 mm length MS cleat of 30x30x5 mm to hold the chain link fencing,back supportrd with 50x50x6 mm GI flat using 75 mm GI bolt with 2 Nos of nut and washers to tie the chainlink including cost of all materials labour lead lift etc complete.
132	Providing GI equal angles 65x65x8 MM as fencing post with 2 Nos of 150 mm length MS cleat of 30x30x5 mm to hold the chain link fencing,back supportrd with 50x50x6 mm GI flat using 75 mm GI bolt with 2 Nos of nut and washers to tie the chainlink including cost of all materials labour lead lift etc complete.
133	Supplying and fixing of 10 gauge chain link fencing of approved quality including cost of all materials labour lead lift etc complete.
134	Supply and fixing of Gate using MS angles, MS rods, etc including cost all materials, labour, etc complete and as directed by the site Engineer.
135	Supplying and laying and fixing of 75mm dia PVC pipe to resist 6 Kg/cm2 water pressure to proper alignment & slope for weep holes as required and as directed by the Engineer at site including cost of pipe and fixing in position, testing all matrials solution , lead, lifts etc., complete
136	Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.
137	Supply of Rolled Steel ISMB 250X125mm as per IS 2062 Grade A, and latest issue from approved vendors of TanTransco.
138	Supply of Rolled Steel ISMB 200X100mm as per IS 2062 grade A, and latest issue from approved vendors TanTransco.
139	Supply of Rolled Steel ISMC 125X65mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
140	Supply of Rolled Steel ISMC 100X50mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
141	Supply of Rolled Steel equal ISA 100X100X8mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
142	Supply of Rolled Steel equal ISA 65X65X6mm grade A as per IS 2062 and latest issue from approved vendors of TanTransco.
143	Supply of Rolled Steel equal ISA 50X50X6mmgrade A as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
144	Supply of Mild Steel chequerred plate of 6mm thick as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
145	Supply of Mild Steel sheet 3.15mm thick as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
146	Supply of Mild Steel Flat 65X10mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
147	Supply of Mild Steel Flat 50X8mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
148	Supply of Mild Steel Flat 25 X 3mm as per IS 2062 grade A and latest issue from approved vendors of TanTransco.
149	Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts (40mm Dia, 3m length),MS Angle,Bolt,Nut washer etc.,
150	Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. including cost of materials for earth electrode using M.S.rod 40 mm dia , red soil and bentonite powder of 20 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG as directed by the field Engineer.
151	Supply of eye bolt of 18 - 20 mm dia GI rod of required length including cost of GI rod and 2Nos GI nuts & washer as directed by the field Engineer.
152	Supply of M8, M9, M10, M12 & M16 full thread /Half thread GI bolt, nuts & GI washer of various sizes confirming to IS 1363/PartI & III/1984 and latest issue from approved vendor of TanTransco.
153	Supply of LC/ Key board of size 4 ft X 3 ft out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer including cost of all materials.
154	supply of CT/PT junction box out of 14Swg (2mm) M.S.Sheet of size 500WX300HX150D wherever required as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials.
155	Supply of AC distribution box out of 14SWG (2mm) M.S.Sheet of size 900W x 1000H X 300D wherever necessary as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB, detachable Gland Plate and locking arrangements including cost of all materials with 1 No 3 Pin 16 A sockets
156	Supply of 40mm Dia `B` Class GI pipe for extension of tandem /down pipe for AB Switches,Earth Spikes and for any other work as required and as directed by field Engineer
157	Supply of 50mm Dia `B` Class GI pipe for extension of tandem /down pipe for AB Switches,Earth Spikes and for any other work as required and as directed by field Engineer
158	Supply of Red Oxide paint as per IS 2074(1992) and latest issue including all consumables etc.,
159	Supply of Aluminium Paint as per IS 2339(1963) and latest issue of IS including all consumables etc.,
160	Supply of Enamel paint as per IS 2932(2003) and latest issue including all consumables etc.,
161	Supply of Anti corrossive /Bitumen Compound Black Paint of reputed make as per latest IS for painting of all joints of earth grid and earth raiser welding locations including all consumables etc.,
162	Supply of Bitumen Impregnated Tape reputed make as per latest IS for Covering the all joints of earth grid and earth raiser welding locations including lead etc.,
163	Supply of Insulator hardware fitting with 6 Bolted Type Tension fitting Clamp for ACSR Zebra Conductor as per latest IS.
164	Supply of Insulator hardware fitting with 4 Bolted Type Tension fitting Clamp for ACSR Zebra Conductor as per latest IS.
165	Supply of Switchend clamp for Single Zebra
166	Supply of Switchend clamp for 75 mm Aluminium Busbar
167	Supply of Switchend clamp for 50 mm Aluminium Busbar
168	Supply of Switchend clamp for Panther
169	Supply of Switchend clamp for Mink
170	Supply of T Clamp for Zebra to zebra ACSR
171	Supply of T Clamp for 75 mm Aluminium bus bar to Single Zebra
172	Supply of T Clamp for 50 mm Aluminium bus bar to Single Zebra
173	Supply of Terminal connector on 110KV Under hung Insulator to suit Single zebra ACSR Conductor
174	Supply of Expansion clamp for 75 mm Aluminium Busbar
175	Supply of Seating Clamp for 75 mm Aluminium Busbar
176	Supply of Free end Clamp for 75 mm Aluminum Busbar
177	Supply of Free end Clamp for 50 mm Aluminuum Busbar
178	Supply of Reducer Clamp for 75 mm Aluminum Bus Bar to single zebra
179	Supply of Reducer clamp for 50 mm Aluminium Busbar to single zebra
180	Supply of Corona Bell for 75mm Dia Aluminium Bus Bar
181	Supply of Corona Bell for 50mm Dia Aluminium Bus Bar
182	Supply of P.G.Clamp for ACSR Zebra Conductor
183	Supply of L Clamp for ACSR Zebra Conductor
184	Supply of reputed make long shackle 6 lever lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.
185	Supply of Digital clock for GPS Time calibration as per latest IS.
186	Supply of flexible copper tape/rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer
187	Supply of ISI mark cable glands of 19mm as directed by the field Engineer.
188	Supply of ISI mark cable glands of 22mm as directed by the field Engineer.
189	Supply of ISI mark cable glands of 25mm as directed by the field Engineer.
190	Supply of ISI mark cable glands of 28mm as directed by the field Engineer.
191	Supply of ISI mark cable glands of 32mm as directed by the field Engineer.
192	Supply of lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination
193	Supply of ISI mark bakelite 16A HRC /rewireable fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.
194	Supply of ISI mark bakelite 63A HRC /rewireable fuse holder in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.
195	Supply of ISI mark 2/5/10/16A HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer
196	Supply of ISI mark 63A HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer
197	Supply of ISI mark Neutral Link of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer
198	Supply of ISI mark 100A porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the field Engineer
199	Supply of ISI mark 2 pole 32A MCB in panels/ Boxes of reputed make as directed by the field Engineer
200	Supply of AC 3 Phase 4 pole 415V , 100Amps ISI mark change over switch of reputed make as required and directed by the field Engineer.
201	Supply of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer.
202	Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required including end plate and Stopper plates & as directed by the field Engineer
203	Supply of wooden Board of 25mm thick for fixing of fuse units wherever required and as directed by the field Engineer. (size 600 X 500mm)
204	Supply of 110V industrial type DC hooter of (ISI make) in panel as directed by the field engineer
205	Supply of Mechanical Foam (AFFF) type trolley mounted 50 Litres capacity AFFF Fire extinguishers with initial charge, complete with hose & air induction nozzle and in general all accessories confirming to the latest issue of IS:13386 with ISI certification mark
206	Supply of Mechanical Foam Portable type 9 litres capacity fire extinguishers with initial charge complete with chromium plated GM cap, high pressure nylon braided discharge hose with specially designed foam designed nozzle and in general all accessories strictly confirming to the latest issue of IS 10204 with ISI Certification mark
207	Supply of Dry Chemical Powder type trolley mounted Cylindrical shape 25KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder level indicator and all accessories confirming to the latest issue of IS 10658 with ISI 10658 with ISI Certification mark
208	Supply of Dry Chemical Powder type Cylindrical shape 9/10 KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of IS 2171 and 1 with ISI Certification mark
209	Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of IS:2171 and 1 with ISI certification mark.
210	supply of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including cost of barrel, sand and consumables as directed by the field Engineer.
211	Supply of fire bucket of 10 lit capacity made out of 26 Swg (0.46 mm) M.S.Sheet painted with white & red enamal paint in side & out side respectively bottom of bucket shall be ` U ` shapped out side of the bucket shall be written as Fire in English /Tamil in white enamal paint including cost of all materials.
212	Supply of fire fighting equipments Display Boards and first aid safety chart boards as directed by the field Engineer.
213	Supply of First Aid Box and Artificial Respiration kit and as directed by the field Engineer.
214	Supply of Rubber mat of size 2000X1000X10mm as per relevant ISI Code.
215	Supply of yard light Stepped tubular pole 6M length Single Bracket pole with base plate (400X400X10mm) 76.10mm OD,x3.65mm thick, 6000mm Length including cost of LED light,fittings and painting in complete shape as per direction of field engineer
216	Supply of yard light pole stepped Tubular pole 8m Length Single Bracket pole with base Plate (400 x 400 x 10 mm) 114.30 mm OD ,x 5.40 mm thick ,4500 mm Length,88.90 mm OD ,x 4.85 mm thick ,1750 mm Length, 76.10 mm OD ,x 3.25 mm thick ,1750 mm length including cost of 72W LED light , fiittings , Double pole MCB, Junction Box and painting in a complete shape as per direction of field engineer and approved drawing.
217	Supply of yard light pole stepped Tubular pole 8m Length Double Bracket pole with base Plate (400 x 400 x 10 mm) 114.30 mm OD ,x 5.40 mm thick ,4500 mm Length,88.90 mm OD ,x 4.85 mm thick ,1750 mm Length, 76.10 mm OD ,x 3.25 mm thick ,1750 mm length including cost of 72W LED light , fiittings , Double pole MCB, Junction Box and painting in a complete shape as per direction of field engineer and approved drawing.
218	Supply of PVC Stickers for Breakers, Panels, chargers and General key Boards as required and as directed by field Engineer.
219	Supply of Aluminium extension type Ladder 35 feet with load bearing capacity of 150Kgs as per BIS and as directed by the field Engineer.
220	Supply of insulated Aluminium Ladder of 10 feet Length with a load bearing capacity of 150 kgs as per BIS and as directed by the field Engineer.
221	Supply of Telescopic Earth Rod - 10 feet made up of hard PVC,copper flats and 6 sqmm copper cable of reputed make (SS Type) as per BIS and as directed by the field Engineer.
222	Supply of Discharge rod made up of hard PVC of 10 feet length (SS Type) , Copper flats and 6 Sq.mm. Cable as per BIS and direction of field Engineer.
223	Supply of Earth rod made up of hard PVC of 10 feet length (SS Type) , Copper flats and 6 Sq.mm. Cable as per BIS and direction of field Engineer.
224	Supply of Insulated Rubber Gloves as per latest BIS and as directed by the field Engineer.
225	Supply of Insulated rubber Gauntlets of reputed make as per latest issue of BIS and direction of field Engineer.
226	Supply of Rechargeable High beam Torch light as per BIS and as directed by the field Engineer.
227	Supply of Emergency Light with rechageable Battery as per BIS and direction of field Engineer.
228	Supply of Digital Multimeter (AC/DC) of reputed make as per latest issue of IS.
229	Supply of Tong Tester 200mA-20 A - 200A of reputed make as per latest issue IS.
230	Supply of Tong Tester AC / DC upto 2000 A of reputed make as per latest issued of IS.
231	Supply of Digital on Line Earth Tester of reputed make and issue of latest IS.
232	Supply of Double end ring Spanner Set (1 set of 12 Nos.,) of reputed make and as per latest isssule of IS.
233	Supply of 1KV Hand Operated Insulation tester as per IS Standard and specification approved by GCC/CBE
234	Supply of Digital Earth tester as per IS Standard as directed by the field Engineer
235	Supply of G.I.Cable Tray 2500mm Length X 600mm width X 100mm height 2mm thickness as per latest IS including jointing plate, Bolt and Nut etc .,
236	Supply of G.I.Cable Tray 2500mm Length X 450mm width X 100mm height 2mm thickness as per latest IS including jointing plate, Bolt and Nut etc .,
237	Supply of G.I.Cable Tray 2500mm Length X 300mm width X 100mm height 2mm thickness as per latest IS including jointing plate, Bolt and Nut etc .,
238	Supply of 3C X 2.5 sqmm,1100V Grade, Armoured ,PVC insulated Copper Control Cable as Per IS 1554(Part-1)1988 with latest amendments
239	Supply of 2C X 35 sqmm,1100V Grade, Armoured ,PVC insulated Copper Control Cable as Per IS 1554(Part-1)1988 with latest amendments
240	Supply of 4C X 16 sqmm,1100V Grade, Armoured ,PVC insulated Copper Control Cable as Per IS 1554(Part-1)1988 with latest amendments
241	Labour, Machineries, consumables for fabrication of Heavy section materials without length wise welded joints (Sectional weight 14Kg/Mtr and above) as per the drawing issued by field engineer.(The Electricity will be borne by Department)
242	Labour, Machineries, consumables for fabrication of Light section with joints wherever necessary (sectional weight below 14Kg/Mtr) as per the drawing issued by field engineer.(The Electricity will be borne by Department)
243	Labour charges for erection of Heavy section Structures (sectional weight 14Kg/m and above) including alignment and minor transporting etc., as per the direction of field engineer.
244	Labour charges for erection of Light section Structures (sectional weight below 14Kg/m) including alignment and minor transporting etc., as per the direction of field engineer.
245	Labour charges for Hot Dip Galvanising with minimum coating of 610 gram/sqm as per IS 4759 and IS 2633 and latest issue of Structural Steel materials etc., and as per direction of field Engineer.
246	Erection of 11KV 3 Pole HG fuse set including alignment,Hardwares and minor transporting etc.,
247	Erection of Stool for 11KV Insulators and also fixing of corona bells at the ends of busbars in a complete shape with provision of hardwares, etc.,
248	Erection of LC/ General Key board at Control building nearer to the operating desk including alignment minor transporting and installation hooks for keys as directed by the field Engineer including cost of all materials.
249	Erection of CT/PT junction box ,AC distribution box, yard light box ,change over switch including fabrication of clamping arrangements ,alignment and minor transporting etc.,
250	Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer
251	Installation of copper Tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer.
252	Erection of 110KV single / double pole stack up right, under hung or suspension insulators including alignment and minor transporting etc.,
253	Erection of 11KV single / double pole stack up right, under hung or suspension insulators including alignment and minor transporting etc.,
254	Stringing of 110KV Single Zebra conductor (1 span 3 run) strung bus including hoisting of insulator and erection of eye bolt and hardware fittings with proper sag and alignment etc.,
255	Stringing of 11KV Single Zebra conductor (1span 3 runs) strung bus including hoisting of insulator and erection of eye bolt and hardware fittings with proper sag etc.,
256	Installation of 75mm IPS Aluminium tube bus bar Without making bends including alignment and minor transporting etc.,
257	Installation of 50mm IPS Aluminium tube bus bar Without making bends including alignment and minor transporting etc.,
258	Erection of Droppers and jumpers Upto height of 6mts with ACSR Zebra Conductor and required power Connector from ground level including alignment and minor transporting etc.,
259	Labour charges for erection of various size of cable Tray including minor transport,jointing of tray , necessary refabrication etc., as directed by the field Engineer.
260	Erection of Droppers and jumpers Upto height a of 6mts to 10 mtrs with ACSR Zebra Conductor and Power Connector from ground level including alignment and minor transporting etc.,
261	Gas cutting of M.S.Chequerred plate 6mm thick for Control Room Cable Trenches, equipments seating etc including alignment and minor tranporting etc.,
262	Installation of 145 KV, 2000A, 40 KA /3Sec, 110V DC - 3 phase Gang operated Outdoor SF6 Breaker with all accessories including Galvanised steel support structure,Terminal Connectors,SF6 Gas Filling, connecting Rod /drive Rod alignment,mechanism Box etc., including alignment with proper tools and tackles using contract crane as per OEM instruction manual and direction of field Engineer.
263	Installation of 11KV,1250A,25KA/3Sec,110V DC Porcelain Clad Type triple pole Outdoor Vacuum Circuit Breaker with Terminal Connector , CT mounting Structure with proper tools and tackles including alignment and complete accessories using crane arranged by the contractor as per OEM instruction manual and direction of the field Engineer.
264	Installation of 145 KV,600-300-150/1A, 40 KA/3Sec, 5 core single phase current Transformer with Terminal Connector, 1 No Junction box including alignment with proper tools and tackles using crane arranged by the contractor as per OEM instruction manual and direction of field Engineer.
265	Installation of 145 KV, 200VA,110KV/RT3/110V/RT3, Class 0.5, 3 core single phase Voltage Transformer with Terminal Connector,1 No Junction box including alignment as per OEM instruction manual using crane arranged by the contractor and direction of field Engineer.
266	Installation of 11KV,1200-600/1A,25KA/3Sec - 2 Core Single Phase Outdoor Current Transformer with Terminal Connector,2mm Bi-metalic sleeves using manual labour including alignment as per OEM instruction manual and direction of field Engineer.
267	Installation of 11KV,400-200-100/1A,25KA/3Sec 2 core Single Phase Outdoor Current Transformer with Terminal Connector,2mm Bi-metalic sleeves including alignment using manual labour as per OEM instruction manual and direction of field Engineer.
268	Installation of 11KV,200VA,0.5 Class, 25KA/3 Sec, 3 Phase Outdoor Voltage Transformer with Terminal Connector,2mm Bi-metalic sleeves including alignment using manual labour arranged by the contractor as per OEM instruction manual and direction of field Engineer.
269	Installation of 100 KVA, 11 KV/433 V , 3 Phase Energy efficient Distribution Transformer with Crane arranged by the Contractor including alignment and belting angles etc.,
270	Erection of 145 KV, 2000 A, 40 KA,110V DC Center Rotating Horizontal Double Break Isolator with Turn and Twist mechanism including earthing device (main/earth Manual operated) and Complete accessories including alignment and minor transporting etc.,
271	Erection of 145 KV, 2000 A, 40 KA , 110V DC Center Rotating Horizontal Double Break Isolator with Turn and Twist mechanism (manual operated) without earthing device and Complete accessories including alignment and minor transporting etc.,
272	Erection of 11 KV,1200 A, 25 KA Center Rotating Horizontal Double Break AB Switch (manual operated) ,Terminal pads,tubular moving contact,Fixed Contact,base channel, arcing horns and tandem/down pipes including alignment and Complete accessories with minor transporting etc.,
273	Installation of 96KV,10KA,Class-3 Heavy Duty Outdoor Station Class metal oxide Gapless porcelain Lightning Arrestor with Terminal Brackets,Surge monitor using crane arranged by the contractor as per OEM instruction manual including alignment and direction of field Engineer.
274	Installation of 9KV,10KA,Class-2 Heavy Duty Outdoor Station Class metal oxide Gapless porcelain Lightning Arrestor, Terminal Brackets as per OEM instruction manual using crane arranged by the contractor including alignment and direction of field Engineer.
275	Installation of 9KV,5KA,Class-2 Heavy Duty Outdoor Distribution Class metal oxide Gapless porcelain Lightning Arrestor Terminal Brackets as per OEM instruction manual and direction of field Engineer.
276	Installation of Control and Relay Panels/charger with flat 65x10mm for mounting arrangement and earthing of Panels including alignment
277	Erection of 110V,120Ah and discharge capacity of 10 Hours rate Battery Set in a Tubular Lead Acid in Transparent SAN Container with seasoned Teak wood Stand in a Double Row Single Tier arrangement, painting the stand with acid proof paint, Stand insulators, terminal connectors, complete accessories as per OEM instruction manual including alignment and minor transporting etc.,
278	Commissioning of 110V,120AH Battery Set including consumables for the Initial filling and first charging of the battery to the required AH input and thereafter atleast 3 cycles of charge/ discharge of the battery set till the battery is charged to its full capacity as per OEM instruction manual and as directed by the field engineer along with tools for charging of battery Set.
279	Machineries, consumables for Laying of earth grid with minimum joints & earth raisers including alignment , anti-corrossive Bitumen compound painting with bitumen impregnated Tape at joints and minor transporting etc.,
280	Machineries, consumables for providing earth raisers for equipments and structures at Outdoor yard including alignment and anti corrosive bitumen compound painting with bitumen impregnated Tape at joints ,with minor transporting and alignment etc.,
281	Machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit
282	Providing earth pit of 115 mm dia to a depth of 6 mtrs. including labour for fabrication of earth electrode using M.S.rod 40 mm dia,ISA & insert electrode in to the bore and refilling with red soil and bentonite powder of 20 Kg and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod to be fixed in the board and aluminium paint should be painted top of the earth rod & its holding portion as directed by the field Engineer.
283	Excavation of Normal soil earth & refilling of average depth of 0.8m x 0.3m for Laying of earth grid and Equipment /Structure earthing at Outdoor yard including lead lift etc.,
284	Excavation of earth & refilling of average depth of 0.4m x 0.3m for Laying of Yard light Cables at Outdoor yard including lead lift etc.,
285	Labour for laying of cable Upto 8Core in duct/ trench including the cost of Aluminium tag for identification and dressing etc.,
286	Labour for laying of cable above 8 Core in duct/ trench including the cost of Aluminium tag for identification and dressing etc.,
287	Labour for laying of cable up to 8 core & clamping on structure including near dressing etc.,
288	Erection of 19/22 mm cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location including alignment etc.,
289	Erection of 25 mm cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location including alignment etc.,
290	Erection of 28 mm cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location including alignment etc.,
291	Erection of 32 mm cable glands by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheaths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location including alignment etc.,
292	Control Cable core end termination with neat dressing and alignment etc.,
293	Fixing of all types of MCB,fuse holder and fuse of all range wherever required as directed by the field Engineer.
294	Installation of AC/DC change over switch wherever required including alignment and as directed by the field Engineer.
295	Installation of terminal block /disconnected type terminal block on mounting channels of CT/PT Juntion boxes and wherever required and as directed by the field Engineer.
296	Installation of wooden Board of various sizes wherever required and as directed by the field Engineer.
297	Erection of Single Fitting LED Pole 6&8Mtrs and laying of cable inside the pole including testing for burning condition
298	Erection of Double Fitting LED Pole 6&8Mtrs and laying of cable inside the pole including testing for burning condition
299	Painting of structures after proper surface preparation using appropriate machinery to remove rust/ scales etc., One primary coat of Red oxide painting of various strutures.
300	Painting of structures after proper surface preparation using appropriate machinery to remove rust/ scales etc., Two coats of Aluminium painting of various strutures.
301	One coat enamel painting/Anti corrosive Painting of Chequerred plates, Equipment board, identification of earth pit board and yard light pole, structure earthing, earth mat, earth pit, shoe paint and Iron and steel items as directed by the field engineer.
302	Labour charges for writing details in Finished Surface boards including cost of enamel paint (Dulex, Asian, Berger preferred) and other Consumables as directed by the field Engineer.
303	Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer.
304	Installation of PVC Stickers for Breakers, Panels, chargers and General key Boards and other works etc., as required and directed by field Engineer,
305	Typing & Printing of 6 copies of commissioning report, soft cad drawing of all Equipments, Structures etc., Instruction manuals including spiral binding works etc.,
306	Labour for the loading/unloading/shifting of Department Non-Fragile material 110KV Isolators at stores or site by the Contractor Without using Board's crane for one operation.
307	Labour for the loading/unloading/shifting of Department Non-Fragile material 11KV AB Switches at stores or site by the Contractor WITHOUT using Board's crane for one operation.
308	Labour for the loading/unloading/shifting of Department Non-Fragile material Cables/Conductors including cutting and rewinding at stores or site by the Contractor Without using Board's crane for one operation.
309	Labour for the loading/unloading/shifting of Department Non-Fragile Aluminium Tube Busbar at stores or site by the Contractor Without using Board's crane for one operation.
310	Labour for the loading/unloading/shifting of Department Fragile material 110KV Breaker at stores or site by the Contractor Without using Board's crane for one operation.
311	Labour for the loading/unloading/shifting of Department Fragile material 11KV Breaker at stores or site by the Contractor Without using Board's crane for one operation.
312	Labour for the loading/unloading/shifting of Department Fragile material 110KV CT/PT/LA/others at stores or site by the Contractor Without using Board's crane for one operation.
313	Labour for the loading/unloading/shifting of Department Fragile material 11KV CT/PT/LA/DT/others at stores or site by the Contractor without using Board's crane for one operation.
314	Labour for the loading/unloading/shifting of Department Fragile material 110V Battery Set at stores or site by the Contractor without using Board's crane for one operation.
315	Labour for the loading/unloading/shifting of Department Fragile material 110KVInsulators at stores or site by the Contractor without using Board's crane for one operation.
316	Labour for the loading/unloading/shifting of Department Fragile material 11KVInsulators at stores or site by the Contractor without using Board's crane for one operation.
317	Labour for the loading/unloading/shifting of Department Fragile material AC/DC/C&R Panels of non-grid Type at stores or site by the Contractor WITHOUT using Board's crane for one operation.
318	Labour for the loading/unloading/shifting of Department Fragile material Battery Charger at stores or site by the Contractor without using Board's crane for one operation.
319	Providing security Labour to look after the movement of men & materials and safeguard the costly equipments for establishment of new Substation.
320	Providing Labour for miscellaneous works such as removing jumpers & re erection after testing,cable cover slab removing and re laying.
321	Transporting of Sub-Station Equipments/Panels/ Insulators/ etc., from karamadai GCC Central Store to 110/11KV Karichipalayam AIS (60Km)
322	Transporting of Iron and Steel items from Thudiyalur steel stock yard to 110/11KV Karichipalayam AIS (30Km) including loading and unloading charges etc., Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For (I) Construction Of Control Room Building With Electrification, Providing Bore Well, Cable Duct, Culvert, Transformer & Structural Plinth, Reinforced Cement Concrete Road, Reinforced Cement Concrete Retaining Wall, Metal Spreading, Chain L, Coimbatore-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For (I) Construction Of Control Room Building With Electrification, Providing Bore Well, Cable Duct, Culvert, Transformer & Structural Plinth, Reinforced Cement Concrete Road, Reinforced Cement Concrete Retaining Wall, Metal Spreading, Chain L, Coimbatore-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us