|
| 1 | Repair to roof and misc. work of Ordnance Factory Hospital, Ambernath (Building No.132) |
| 2 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing debris, etc all as directed by EIC. |
| 3 | M&L GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste if in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required, etc all complete as directed by EIC. |
| 4 | M&L Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2, etc all complete as directed by EIC. |
| 5 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4, etc all complete as directed by EIC. |
| 6 | M&L Rendering 20mm thick on fair faces of brick work or concrete surfaces in CM 1:4, etc all complete as directed by EIC. |
| 7 | M&L Neeru finish to plastering as specified, etc all complete as directed by EIC. |
| 8 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4, etc all complete as directed by EIC. |
| 9 | M&L for preparation old surface of steel surfaces of any description over 10 cm width and applying one coat of red oxide and two coat of synthetic enamel paint, etc all complete as directed by EIC. (Make: Nerolac / Burger / Asian) |
| 10 | M&L Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in Type B0 1:2:4 12.5 mm graded aggregate, etc all complete as directed by EIC. |
| 11 | M&L Bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, at the junction of roofing to vertical surfaces to prevent leakages, etc all complete as directed by EIC. |
| 12 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings and stacking in row, etc all complete as directed by EIC. |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, etc all complete as directed by EIC. |
| 14 | Dismantling of timber framed scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, etc all in framed work, etc all complete as directed by EIC. |
| 15 | M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc with L or J hook etc all complete as directed by EIC.(Make: Charminar / Everest) |
| 16 | S&F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hook and washers, in roofs, walls etc. with grade of zinc coating 275, etc all complete as directed by EIC. (Make : Jindal / Tata/ SAIL) |
| 17 | S&F 0.63mm Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), etc all complete as directed by EIC (Make: Jindal / Tata / SAIL) |
| 18 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, etc all complete as directed by EIC.(Make: TATA/ Jindal / SAIL) |
| 19 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, etc all complete as directed by EIC Note:-Sample should be get approved before execution |
| 20 | S&F Non - skid Ceramic colour tiles (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, thickness as per manufacturer specification in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc all complete as directed. |
| 21 | Dismantling Chowkhats or frames with shutter exc 1.5 sq. m but n exc 4 sq. m each and removing to store, etc all complete as directed by EIC |
| 22 | M&L 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, etc all complete as directed by EIC. |
| 23 | S&F Flush shutters, solid core construction , with block board core and plywood face panels(30 mm), commercial type on both sides both face is covered with decorative face veneer/ sunmica with lipping/frame to match, etc all complete as directed by EIC. |
| 24 | S&F 125mm Butt hinges, heavy weight, cold rolled mild steel, and fixed, etc all complete as directed by EIC.Note : Sample should be approved before execution of work |
| 25 | S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed, etc all complete as directed by EIC.Note : Sample should be approved before execution of work. |
| 26 | S&F 150mm Aluminium handles, cast type, anodized, etc all complete as directed by EIC.Note : Sample should be approved before execution of work. |
| 27 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, etc all complete as directed by EIC.Note : Sample should be approved before execution of work. |
| 28 | S&F Granite 18-20mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc all complete as directed by EIC.Note : Sample should be approved before execution of work |
| 29 | S&F Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete, etc all complete as directed by EIC.Note : Sample should be approved before execution of work. |
| 30 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 31 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections and other sections of approved make of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws and locking arrangement, etc all complete as directed by EIC.Note : Sample should be approved before execution of work. |
| 32 | S&F Sheet glass 4mm thick , best quality and glazing with oil putty in square exc 0.5 sq. m in each pane, sheet Glass 4 mm thick with ething strip or pattern, etc all complete as directed by EIC.(Make: Modi Guard / Saint Gobin)Note : Sample should be approved before execution of work. |
| 33 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, etc all complete as directed by EIC. |
| 34 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land on primed surface by forced application complete all as specified including removing of existing waterproofing treatment and trees ( wild growth) on slab and repairing old surface if damaged by cutting V groove and filling it with crack seal material, etc all complete as directed by EIC. (Make Tiki dan / Pedilite) Note: Sample should be approved by EIC before Starting Work. |
| 35 | Dismantling Single layer Mangalore pattern or similar tiles in roofing and stacking, etc all complete as directed by EIC. |
| 36 | Dismantling Battens for tiles, shingles etc, of any size including tilting fillets exc 15cm and stacking, etc all complete as directed by EIC. |
| 37 | M&L for Clean swan batten for manglore tiles 35cm c/c exc. 5 cm and n. Exc 15 sq.cm in Second class soft wood including creosote oil, etc all complete as directed by EIC. |
| 38 | S&F Roof tiles, Mangalore pattern, interlocking at side joints, laid dry, etc all complete as directed by EIC. |
| 39 | S&F Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6, etc all complete as directed by EIC. |
| 40 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc all complete as directed by EIC. |
| 41 | M&L for preparation of new surfaces and applying one coat of primer and two coat of distemper oil emulsion, etc all complete as directed by EIC.(Make: Asian/ Burger/ Nerolac). |
| 42 | M&L for preparation of surfaces and applying one coat of primer and two coat Cement paint, etc all complete as directed by EIC.(Make: Asian/ Burger/ Nerolac/ snowcem/ creamcem) |
| 43 | Excavating in hard dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, etc all complete as directed by EIC. |
| 44 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 100mm, etc all complete as directed by EIC. |
| 45 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150mm, etc all complete as directed by EIC. |
| 46 | M&L Concrete bed in 1:3:6 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 100mm dia pipe, etc all complete as directed by EIC. |
| 47 | M&L Concrete bed in 1:3:6 to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 150mm dia pipe, etc all complete as directed by EIC. |
| 48 | M & L Sail-glazed stoneware drain pipes 150mm laid in trenches and jointed as specified, etc all complete as directed by EIC. |
| 49 | M & L Sail-glazed stoneware drain pipes 100mm laid in trenches and jointed as specified, etc all complete as directed by EIC. |
| 50 | M&L for rendering 20mm cement plaster rendering is to be finished even and smooth (without using extra lime or cement) with, etc all complete as directed by EIC. |
| 51 | M&L Cement concrete in surface channels and drains in Type B2 1:2:4, etc all complete as directed by EIC. |
| 52 | Providing precast cement concrete Chamber Cover of 1:2:4 type B1 (20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, etc all complete as directed by EIC. |
| 53 | Mild steel bars deformed or twisted 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc all complete as directed by EIC. |
| 54 | S & F PVC pipe 110mm, etc all complete as directed by EIC. |
| 55 | S & F PVC (SWR) bends any radius 110mm, etc all complete as directed by EIC |
| 56 | S&F PVC (SWR) branch piece ,single Y 110mm , etc all complete as directed by EIC. |
| 57 | S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs Ditto but including trap set in and including concrete fixing in repair, etc all complete as directed by EIC. |
| 58 | S& F 10 lit PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, etc all complete as directed by EIC. |
| 59 | S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) add in repairs, etc all complete as directed by EIC. |
| 60 | S&F Health faucet (ABS) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified, etc all complete as directed by EIC. |
| 61 | S & F 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) , etc all complete as directed by EIC. |
| 62 | S&F Vitreous China wash basin, while, flat back, size 450x300 excluding taps, waste, chain and plug and porcelain stopper but including brackets, etc all complete as directed by EIC. |
| 63 | S&F of 15mm Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches, etc all complete as directed by EIC. |
| 64 | S&F of 20mm Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches, etc all complete as directed by EIC. |
| 65 | S&F of 25mm Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches, etc all complete as directed by EIC. |
| 66 | S&F of 40mm Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches , etc all complete as directed by EIC. |
| 67 | S&F of 50mm Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches , etc all complete as directed by EIC. |
| 68 | S&F Bib tap 15mm Fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, etc all complete as directed by EIC. |
| 69 | S&F Pillar taps fancy type 15mm , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, etc all complete as directed by EIC. |
| 70 | S&F Waste fittings 32mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, etc all complete as directed by EIC. |
| 71 | S&F PVC connections 15mm size with PTMT nuts of length 600mm, etc all complete as directed by EIC. |
| 72 | S&F waste pipe /Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern or wash basin, etc all complete as directed by EIC. |
| 73 | S&F Brass chromium plated shower rose 125mm size, etc all complete as directed by EIC. |
| 74 | S&F 15mm Ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed, etc all complete as directed by EIC. |
| 75 | S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms), etc all complete as directed by EIC. |
| 76 | S&F 16mm Female Brass Threaded Adaptor (FTA/ FBTA), etc all complete as directed by EIC. |
| 77 | S&F 15mm Male Brass Threaded Adaptor (MTA/ MBTA), etc all complete as directed by EIC. |
| 78 | S&F 20mm Male Brass Threaded Adaptor (MTA/ MBTA), etc all complete as directed by EIC. |
| 79 | S&F 25 mm Male Brass Threaded Adaptor (MTA/ MBTA), etc all complete as directed by EIC. |
| 80 | S&F 40mm Male Brass Threaded Adaptor (MTA/ MBTA), etc all complete as directed by EIC. |
| 81 | S&F 16mm Brass Elbow, etc all complete as directed by EIC. |
| 82 | S& F UPVC Ball valve 16mm, etc all complete as directed by EIC. |
| 83 | S& F UPVC Ball valve 20mm, etc all complete as directed by EIC. |
| 84 | S&F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, etc all complete as directed by EIC. |
| 85 | S&F 16MM Brass Tee, etc all complete as directed by EIC. |
| 86 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, etc all complete as directed by EIC. |
| 87 | Labour only Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, etc all complete as directed by EIC. |
| 88 | S&F Aluminum anodised Tubular towel rail 20mm dia, etc all complete as directed by EIC. |
| 89 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, etc all complete as directed by EIC. Please Enable Macros to View BoQ information |
