|
| 1 | HSR Item 7.22.2-Brick work with common burnt clay nonmodular bricks of class designation 10.5 in superstructureabove plinth level up to floor IV level in all shapes and sizes in: 2. Cement mortar 1:6 (1 cement : 6 coarse sand)HSR Rate(Rs.) 4488.00 Through Rate |
| 2 | HSR Item 7.28.1-Half brick masonry with common burnt claynon-modular bricks of class designation 10.5 in superstructureabove plinth level up to floor IV level. 1. Cement mortar 1:3 (1cement :3 coarse sand)HSR Rate(Rs.) 519.00 Through Rate |
| 3 | HSR Item 6.15.1-Reinforced cement concrete work in walls(any thickness), including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments,posts and struts etc. above plinth level up to floor four level,excluding cost of centering, shuttering, finishing andreinforcement : 1. 1:1.5:3 (1 cement : 1.5 coarse sand(zoneIII) : 3 graded stone aggregate 20 mm nominal size)HSR Rate(Rs.) 5969.00 Through Rate |
| 4 | HSR Item 6.30.5-Centering and shuttering including strutting,propping etc. and removal of form for 5. Lintels, beams, plinthbeams, girders, bressumers and cantileversHSR Rate(Rs.) 296.00 Through Rate |
| 5 | HSR Item 6.30.3-Centering and shuttering including strutting,propping etc. and removal of form for 3. Suspended floors,roofs, landings, balconies and access platformHSR Rate(Rs.) 208.00 Through Rate |
| 6 | HSR Item 6.34.6-Steel reinforcement for R.C.C. work, wherenot included in the complete rate of RCC, includingstraightening, cutting, bending, placing in position, binding,wastage, overlaps, welded joints, spacer bars, chairs, stays,hangers and annealed steel wire etc. complete in all respect above plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. 6. Thermo-Mechanically Treated bars of grade Fe-500D or more.HSR Rate(Rs.) 68.00 Through Rate |
| 7 | HSR Item 13.21.2-Supply and fixing Windows frames(Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs completein all respects as per drawing, design, specification and entire satisfaction of Engineer-in-charge. 2. Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutterHSR Rate(Rs.) 1240.00 Through Rate |
| 8 | HSR Item 13.29.2-Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer usingstructural steel etc. as required. 2. In gratings, frames, guardbar, ladder, railings, brackets, gates and similar worksHSR Rate(Rs.) 83.00 Through Rate |
| 9 | HSR Item 6.16-Reinforced cement concrete work in beams,suspended floors, roofs having slope up to 15° landings,balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level up to floorfour level, excluding the cost of centering, shuttering, finishingand reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).HSR Rate(Rs.) 6113.00 Through Rate |
| 10 | HSR Item 6.30.6-Centering and shuttering including strutting,propping etc. and removal of form for 6. Columns, Pillars,Piers, Abutments, Posts and StrutsHSR Rate(Rs.) 262.00 Through Rate |
| 11 | HSR Item 11.5.3-12 mm cement plaster of mix : 3. 1:4 (1cement: 4 fine sand)HSR Rate(Rs.) 113.00 Through Rate |
| 12 | HSR Item 11.6.1-15 mm cement plaster on the rough side ofsingle or half brick wall of mix : 1. 1:4 (1 cement: 4 fine sand)HSR Rate(Rs.) 138.00 Through Rate |
| 13 | HSR Item 12.10.3.1-Providing and fixing glazed shutters fordoors, windows and clerestory windows using 4 mm thick floatglass panes, including ISI marked M.S. pressed butt hingesbright finished of required size with necessary screws. 3.1.Kiln seasoned selected planks of sheesham wood35 mm thickHSR Rate(Rs.) 2794.00 Through Rate Please Enable Macros to View BoQ information |
