|
| 1 | Supplying & stacking of following materials at site/Enquiry Office of approved make: |
| 2 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. |
| 3 | 18 mm thick block board with commercial ply veneering on both side |
| 4 | Ply wood 5 ply with commercial ply on both faces 6 mm thick |
| 5 | Portland Cement (OPC-43 Grade) |
| 6 | Coarse sand (zone III) |
| 7 | Sand zone V (Jamuna) |
| 8 | Stone Aggregate (Single size) : 25 mm nominal size |
| 9 | White Cement |
| 10 | Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) |
| 11 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 12 | 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 13 | C.P. Brass bibcock 15 mm |
| 14 | 15 mm PTMT bib cock with flange (fancy) |
| 15 | C.P. Brass angle valve 15 mm |
| 16 | PTMT Angle Stop cock with Flange 15 mm |
| 17 | Anodised Aluminium sliding door bolt 250x16 mm |
| 18 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 19 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 20 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 21 | Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm nominal dia |
| 22 | Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm nominal dia |
| 23 | PTMT Pillar cock (fancy) 15 mm foam flow |
| 24 | PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 25 | PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 26 | PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 27 | C.I. bracket for wash basin and sinks |
| 28 | Vitreous china flat back wash basin 450x300 mm |
| 29 | Vitreous china flat back wash basin 550x400 mm |
| 30 | PTMT - Waste Coupling 31/32 mm |
| 31 | Polyethylene water storage tank with cover and suitable locking arrangement |
| 32 | SS handle 125mm |
| 33 | Stainless steel SS grade 304 , curtain rod 20 mm dia 1.20mm thick |
| 34 | Stainless steel SS grade 304, brackets ( curtain rod) 20 mm dia 1.20mm thick |
| 35 | Mirror of superior make glass 60x45 cm |
| 36 | M.S. heavy weight butt hinges 75x60x3.1 mm IS: 1341 marked |
| 37 | Solvent |
| 38 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 39 | Marandi wood in planks |
| 40 | All drive screws (for gypsum board) |
| 41 | Wooden screws with plastic rawl plugs 35x8 mm |
| 42 | PTMT grating 100 mm dia |
| 43 | 125 mm grating with waste hole |
| 44 | CP Brass Single lever telephonic wall mixer of approved make |
| 45 | C.P. Brass Centre Hole Basin Mixer With Cast Spout |
| 46 | U-PVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia |
| 47 | CPVC Elbow 20mm |
| 48 | CPVC Elbow 25mm |
| 49 | CPVC Brass Elbow 20x15 mm |
| 50 | CPVC Brass Elbow 25x15 mm |
| 51 | CPVC Tee 20 mm |
| 52 | CPVC Tee 25mm |
| 53 | CPVC Socket 20mm |
| 54 | CPVC Socket 25mm |
| 55 | CPVC Union 20 mm |
| 56 | CPVC Union 25mm |
| 57 | CPVC Male Adapter (Plastic Threads) 20x15mm |
| 58 | CPVC Male Adapter (Plastic Threads) 25x15mm |
| 59 | CPVC Male Adapter (Plastic Threads) 25x20mm |
| 60 | CPVC Female Adapter (Plastic Threads) 20x15mm |
| 61 | CPVC Female Adapter (Plastic Threads) 25x20mm |
| 62 | CPVC Tank Nipple 20 mm |
| 63 | CPVC Tank Nipple 25mm |
| 64 | Wash Basin Fastner 10mm |
| 65 | G.I. Nickel Pipe Hook |
| 66 | PVC Elbow 4\\" |
| 67 | PVC Socket 75 mm |
| 68 | PVC Gitti 6mm (1 pkt = 250 nos.) |
| 69 | Hacksow Blade |
| 70 | Nahni Trap 4\\"x3\\" |
| 71 | Glass Putty |
| 72 | Fevicol |
| 73 | Mild Steel Nails Headless 17 No. 1\\" (1 pkt = 250 nos.) |
| 74 | Mild Steel Nails Headless 14 No. 1\\" (1 pkt = 250 nos.) |
| 75 | Cobbler Nails 1\\" (1 pkt = 250 nos.) |
| 76 | PVC P-Trap 100x125 mm |
| 77 | C.P. Brass two way angle cock with flange 15mm 2 in 1 (Shakti DEW-8512) or equivalent |
| 78 | Kitchen Sink waste coupling (Shakti SWC-04) or equivalent |
| 79 | Water tank lid/cover |
| 80 | PVC connection with PTMT nuts 900mm (Shakti SB-1326) or equivalent |
| 81 | RCC cover with frame 300x300mm for gully trap |
| 82 | Syphon Floor mounted toilet seat |
| 83 | Hard broom sticks |
| 84 | PVC Cistern Syphon set (Shakti SB-CSSS01) or equivalent |
| 85 | Concealed rising fitting 15mm (Shakti SP-1221) or equivalent |
| 86 | Teflon Tape |
| 87 | PTMT Waste Jali |
| 88 | MTA-FTA plain 20 mm |
| 89 | MTA-FTA thread (CPVC) 20mm Please Enable Macros to View BoQ information |
