|
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed . |
| 2 | M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed. |
| 3 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed. |
| 5 | M&L for 15mm thick (10+5) in two layers of Polymer modified ready mixedcement based plaster on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 6 | M&L for 10mm thick Polymer modified ready mixedcement based plaster on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 7 | M&L for 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified . |
| 8 | M&L Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying One coat of synthetic enamel paint complete all as specified and directed. |
| 9 | S& F for False ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595mm x 595mm of thickness not less than 9mm including with GI powder coated frame angle/tee grid frame work for ceiling with following specifications & incl disamntling ceiling board any type etc :-(a) Bottom Tee- 25mm x 25mm, 1.0mm thickness (b) Cross Tee- 25mm x 25mm, 1.0mm thickness .(c) Wall angle- 25mm x 25mm, 1.00mm thickness (d) 1.imm dia GI wire suspenders alonwith adjustable clamps to maintain levelling in cluding fixing to ceiling fasteners as per manufacturers instructions.(e) Rest all as directed by the GE Make: Vinyl TOUCH of LaGyp. |
| 10 | M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar, bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed . |
| 12 | M&L for Glazed rectfied jointless coloured group ceramic tiles, of size 300x450x7mm/300/600/7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified. |
| 13 | M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed. |
| 14 | M&L for Dark shade/double charged/ultracharged Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified. |
| 15 | All as per item No 14 above but as in skirting over 10mm thick backing coat of CM 1:4 |
| 16 | M&L for machine cut kota stone slab flooring 18-20mm thick over screed bed over bedding layer of morar 20mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfacey mixed with pigment to match the shade of the slab including rubbing and polishing. |
| 17 | M&L for 75mm thick PCC 1:2:4 type B-1 (using 20mm agg. ) as in plinth protection / path/ any paved area finishing cement concrete surface even and smooth complete all as specified and directed. |
| 18 | S&F in repairs Vitreous China wash basin, white, flat back, size 580x450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 19 | S&F in repair vitreous china wash basin, under counter of oval/rectangular type white, size 570x450mm including all fittings brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified. Make Cera,Parryware or equivalent complete all as specified and directed. |
| 20 | M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick in cement mortar (1:4) bedding including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, with and including providing nosing to edges of slab and drilling of hole for gas pipe using mechanical method. Note: Granite stone slab shall be in single piece to fit. |
| 21 | S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with flush pipe and pvc connection of 450mm long along with seat cover,P or S trap, fixed complete all as specified. Make Cera,Parryware, ESSCO all as specified and directed. |
| 22 | S&F for PVC valveless, with top button double action type,syphonic action type flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe, fixed in repairs, complete all as specified. Make: Cera,Parryware, ESSCO. |
| 23 | S&F in repair vitreous china urinals, half stall type (420 x 395 x 635mm), complete incl providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with CP waste coupling all as specified and approved by Enger-in-Charge.Make Cera,Parryware, ESSCO. |
| 24 | Taking up or down steel tubing and connections, including cleaning serviceable pipe for refixing and balance under schedule of credit all as specified and directed15mm bore |
| 25 | all as per above but 20mm bore |
| 26 | S&F of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed. |
| 27 | S&F 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 28 | S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length \\"medium grade \\" with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge. |
| 29 | all as per above but 75mm bore |
| 30 | S&F PVC (SWR) bends with or without door of 110mm bore. |
| 31 | S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. . |
| 32 | S&F for towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaquar Cat Part No.ACN 1111SM or equivalent in Make as per Appx `E' to Particular specification. |
| 33 | Supply only bevelled edge mirror of 600x450 selected quality mounted on 6 mm thick AC building board commercial ply and fixed to wooden plugs with chromium plated screws ad cup washers complete all as specified and directed. |
| 34 | S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed. Make Cera,Parryware, ESSCO. |
| 35 | S&F in repair for Stop cock /angle CP fancy type 15mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. Make : Cera,Parryware, ESSCO. |
| 36 | S&F in repairs 15mm bore pillar taps,chromium plated, swan neck, cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as directed. Make : Cera,Parryware, ESSCO. |
| 37 | S&F Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in positin complete in all as specified and directed . |
| 38 | S&F for glass shelf assembly 200mm, fixed with brass screws and plugs. |
| 39 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. . |
| 40 | S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed repair in position including 20 mm dia float valve, dismantling existing water tank. |
| 41 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) n exce 1.5 Sqm each including complete all as specified and directed. |
| 42 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed. |
| 43 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant as per specifications drawing as directed by the Engineer - in -charge . Material test certificate and authentication should be compulsory provided by the manufacturing company.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 44 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 45 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2020 including making good the disturbed surface all as specified and directed. |
| 46 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. |
| 47 | S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka |
| 48 | S&F hinges (125 mm) stainless steel medium weight complete all as specified |
| 49 | S&F in repairs aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified |
| 50 | S&F in repairs 250 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 51 | S&F floor door stopper aluminium body over length of cover plate 140 mm and tonque anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 52 | M&L preparing new surfaces of walls applying two coat of oil bound distemper over 3mm thick wall care putty over a coat of primer complete all as specified & directed by EIC. |
| 53 | M&L for preparing old decorated surfaces of wall (plasterered or unplastered or complete removal of existing treatment) & applying two coat of oil bound distemper over 3mm thick wall care putty complete all as specified. |
| 54 | M&L for preparation of old decorated surfaces of ceiling applying two coat of oil bond distemper complete all as specified and directed |
| 55 | M&L for Machine pressed precast concrete interlocking paver block rubber moulded any shape and size with gray cement and pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment glosy finished |
| 56 | M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) for floor sub base. |
| 57 | Demolition cement concrete any description and in any position not other wise specifically provided for Complete all as specified |
| 58 | Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed. |
| 59 | M&L cement plaster (1:3) with 10 mm thick to be finished smooth without using extra cement mixed with WPC @ 2% by weight of cement, , complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only. |
| 60 | M & L for APP modified roof treatment over existing roof slab etc including taking down to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:-(a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sq cm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2.(viii) Water absorption - Not more than 1% on mass within 24 hours.(ix) Cold flexibility - Minimum (-) 20C.(x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provide a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/Sqm as prescibed by manufacturer. |
| 61 | Supply only liquid integral water proofing compound |
| 62 | M&L for leakage / seepage proof coating consisting of preparing the new/old surfaces of existing exterior walls, parapet walls, chajjas, soffit of beams, columns etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed.Notes (i) The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE. (ii) Painting shall be carried out in camouflage pattern as aprroved by the GE. |
| 63 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 64 | M&L two coat of synthetic enamel paint over red oxide over preparation of new steel surface complete all as specified. Please Enable Macros to View BoQ information |
| 65 | M&L two coat of synthetic enamel paint over red oxide over preparation of new steel surface complete all as specified. Please Enable Macros to View BoQ information |
