|
| 1 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) as in surface channel, coping etc. |
| 2 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggreggate as in levelling course of flooring complete all as specified and directed. |
| 3 | M&L for vitrified light shade ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sq m but not exceeding 0.36 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 4) complete all specified and directed. |
| 4 | All as per Item No -03 above but in skirting with rendereing of Cement plaster 10mm thick in CM ( 1: 3) complete all as specified and directed . |
| 5 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base of 20mm thick in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all specified and directed. |
| 6 | All as per Item No -05 above but in skirting with rendereing of Cement plaster 10mm thick in CM ( 1: 3) as in backing coat complete all as specified and directed . |
| 7 | Taking down Chowkats or frames exc. 1.50 Sqm but nexc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 8 | Taking down Chowkats or frames n exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 9 | M & L for 125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. |
| 10 | M & L for 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and directed. |
| 11 | M & L for Providing, cement concrete type C0, 1:3:6 (12.5 mm graded aggregate)for chowkhat filling as required all as specified and directed by engineer in charge. |
| 12 | M&L 35mm thick with 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified |
| 13 | M&L Glazed and skeleton shutters 35 mm thick 2nd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted withcut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats |
| 14 | S& F medium weight cold rolled Mild steel Butt hinges 100 mm size . Complete all as specified and directed. |
| 15 | S & F for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed . |
| 16 | S & F for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed . |
| 17 | S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including tracks, joining cleat for fixing etc. complete all as specified |
| 18 | S&F Powder coated 2/3 track sliding aluminium window shutters and frame sliding type incl neccessary accesories , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 19 | M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed. |
| 20 | Rounding to edge of stone slabs one edge,such as in steps,cooking platform,and other similar situations. |
| 21 | S & F for 4 mm thick Plain glass,and glazing in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 22 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 23 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed . |
| 24 | S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed. |
| 25 | S&F 300 mm long MS sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 26 | M&L for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 |
| 27 | M/L for 18 mm thick Block boards, grade 2 quality, interior grade, commercial type,vennered with both faces fixed with wooden screws to timber and nails for cupboards to the size including second class hardwood lipping allround of corss section not exc 3 Sqcm complete all as specified and directed |
| 28 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width 30mm etc complete all as specified and directed |
| 29 | S &F of 125mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 30 | S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid on wall complete all as specified and directed. |
| 31 | S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 32 | Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 33 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius old size bricks built in cement mortar 1:6 complete all as specified and directed. |
| 34 | Taking down cement plaster on brick/stone/concrete surface and hacking out joints hacking for key scrubbing down with water etc complete |
| 35 | M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc.complete all as specified and directed |
| 36 | M & L rendering 15mm thick on surface of brick work/concrete surface in CM 1:4 and is to be finished even and smooth with out using extra cement complete all as specified directed with using Integrated liquid water proofing compound @ 0.2 ltr per bag of cement or as per manufacturer instruction complete all as specified and directed. Note : Water proofing liquid will be paid and measured seperately |
| 37 | M & L for 5mm thick cement plaster in CM 1:3 on fair faces of brick or concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc.complete all as specified and directed |
| 38 | Supply only integrated liquid waterproofing compound. |
| 39 | M & L for Preparation of newly plastered surfaces/un plastered surfaces and applying three coat of white washing on ceiling complete all specified and directed. |
| 40 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of acrylic Distemper over a coat of primer of required shade and colour including wall care putty etc complete all as specified Note: (wall putty shall be measured and paid seperately) |
| 41 | M & L for perparation of new plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint ( Weather Proof) and including priming coat of exterior primer applied etc complete all as specified and directed. |
| 42 | M & L for Preparation of old plastered surfaces of including brooming down with steel wire brushing etc and applying one coat of white washing on surfaces of on ceiling /soffits of slabs, chajjas all as specified and as directed at site. |
| 43 | M&L for Preparation of old plastered surfaces of walls and applying two coats of acrylic Distempering ofrequired shade and colour including one coat of 1.00mm thick wall care putty complete all as specified and directed |
| 44 | M & L for complete removal of existing finish on old surfaces of walls and applying Two coats of acrylic emulsion paint ( Weather Proof) exterior paint of required shade complete all as specified and directed. |
| 45 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for. |
| 46 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands, chajjas in walls, fascias horizontalor sloping and similar work , exc 5cm but not exc.10cm wide complete all as specified and directed by Engineer -in-charge |
| 47 | Use and waste for Form work for fair finished flat surfaces as in chajja thickness exc 200mm complete all as specified and directed by Engineer -in-charge |
| 48 | M&L for Mild steel TMT Bars 10mm dia Grade-500D and over cut to length bent to shape required including crancking, bending spirally for hooping and including mild steel wire (annealed) not less than 0.9m dia or securing with clips complete all as specified and directed by Engineer -in-charge |
| 49 | M & L for RCC (Nominal Mix) type B0 1:2:4 with using 12.5 mm graded stone aggregate as in chajjas, fascias in isolated locations in ground floor, first floor and roof projections including necessary scaffolding upto 8.00mm height of building complete all as specifed and directed by Enginner-in-charge . |
| 50 | Taking down existing water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed. |
| 51 | M&L 25mm to 40mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof for levelling course finished even and fair without using extra cement complete all as directed by Engr-in-charge. |
| 52 | Preparation of surface and applying one coat of hot bitumen blown 85/25 on APP membrane surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed. |
| 53 | M & L for roof treatment using APP based polymeric membrane, minimum weighing 3.5 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced torch application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed. |
| 54 | M& L application of cold Primer @0.80 kg/ Sqm uniformly spread to the concrete surface etc complete all as specified and directed. |
| 55 | M & L for two coat of aluminium paint above the new untreated APP membrane complete all as specified and directed. |
| 56 | M&L for 1mm thick wall care putty on wall all as specified and directed. |
| 57 | Preparation of New surfaces of wood and wood based surfaces and applying two coat of synthetic enamel paint over a coat of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 58 | Preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of pink primer to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 59 | S & F Harrison rail 20 mm Dia(Curtain rod)s, of anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc.all as specified and directed |
| 60 | M&L for prepration for old concrete surface for drilling extra bars suitable for 10mm dia deformed TMT bar upto specified depth including fiiling with epoxy resin and TMT bar for chajja repair etc complete all as specified and directed |
| 61 | Taking down Cement plaster or loose concrete upto maximum depth 40mm of Column , Beams etc providing MICROCONCRETE of avg thickness 40 mm including necccassary formwork complete all as specifed and directed. |
| 62 | Supply and applying nitto bond chemical as per manufacture instruction over old concrete surfaces complete all as specified |
| 63 | Disconnecting existing exc 250 nexc 500 Ltr tanks, setting aside (or lowering if required) for repairs, cleaning, etc removing scale and durt from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 64 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified |
| 65 | M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. |
| 66 | M&L hard core of gauge exc 63mm but not exc 100 mm depoted ,spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface broken stone or boulders |
| 67 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base |
| 68 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 69 | M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. |
| 70 | M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. |
| 71 | M&L for 20mm thick granite stone slab machine cut, bedded over 15mm thick (1:4) cement mortar scree and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including full nosing, grinding and polishing complete as directed |
| 72 | M&L for preperation of new concrete /plastered surface of any description, two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 73 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, rounded or chamfered on edges complete all as specified and directed. |
| 74 | M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 |
| 75 | Demolition of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified. |
| 76 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame all as specified and directed. |
| 77 | S&F for Solid PVC decorative Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. |
| 78 | Taking down the existing surface/ concealed type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. Please Enable Macros to View BoQ information |
| 79 | Taking down the existing surface/ concealed type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light point complete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. Please Enable Macros to View BoQ information |
