|
| 1 | Demolition of cement concrete (unreinforced) including tile and floor finishes in ground floors and paving n exc 15 cm th (below or above ground level) complete all as specified and as directed.Note:(No extra cost to be borne by govt in r/o flooring overleaped with tile incl screed .Thickness to be considered as total thickness of overleaping) |
| 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 3 | Demolition and breaking up drain pipes 150mm bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed |
| 4 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified. |
| 5 | Taking down cement plaster of any thickness on brick/stone or conc surfaces including racking out joints hacking for key to any thickness scrubbing down with water etc.complete all as specified and as directed.Note :(No extra cost shall be borne by Govt exchequer for any no of layers over leaping of tiles / mosiac finish) |
| 6 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/blankets, any thickness, including cover fillets.complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified. |
| 8 | Dismantling existing PVC water tank exc 500 litres and n.exc 1000 ltrs capaicty and removing to store.complete all as specified and as directed. |
| 9 | Taking down chowkhats with shutter (without taking off from shutter) exc 1.5 sqm and n exc 4 sqm each and removing to store and making good to surface disturbed due to taking down complete all as specified and as directed. |
| 10 | Taking down chowkhats with shutter (without taking off from shutter) n exc 1.5 sqm each and removing to store.complete all as specified and as directed. |
| 11 | Taking down shutter of any description exc 1 sqm and n exc . 2 sqm and refixing in the same opening after repairing, complete all as specified. |
| 12 | Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed. |
| 13 | Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed. |
| 14 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified. |
| 15 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified. |
| 16 | Cutting chases,pinning in, making good to facing on brick wall where required and pointing in CM 1:3 to end or edges of landings,steps,cill,shelves,lintel etc and cutting chases for concealed water tubing or concealed conduite wiring etc and making good ,cutting not exc 10 cm girth. complete all as specified & directed. |
| 17 | Taking down/dismantling of existing roof treatment of aany description such as old APP membrane roof treatment etc terracing including screed bed etc. Hessian base felt/tar felt etc(any type andthickness)complete all asspecified and directed and remove the same from site,complete all as specified and as directed. |
| 18 | Roof surface treated with PU Elastoseal primer to seal the pores and enhance the adhesive of the coating, supply and applying single component waterproofing liquid membrane based on pure,elastomatric,polythinr resin cold applied of spray/brush applied membrane with an elongation of 650%+50 and tensile strength not less than 2 Mpa. crack bridging ability not less than 2mm. No leakage upto 5 bars of water pressure. Shore Hardness> 50 Shore. The minimum thickness to be applied shall be 1.5mm(overall) in two layers(each layer 750micron) or as per manufacture instructions so as to achieve thickness not less than 1.5mm including providing & laying of protective Geotextile fabric 150 GSM over than entire membrane with proper overlaps of 75mm complete all as specified and as directed by Engr-in charge. (Note : (i) The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer . (ii) Payment will be made after providing warranty certified from the company. (iii) Roof treatment colour shall be in black/grey. |
| 19 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified. |
| 20 | 10 mm thick plastering in cement mortar 1:6 on stone masonry / brick work surfaces of fair faces of brick surfaces, finished even and smooth without using extra cement, complete all as specified. |
| 21 | 15 mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces / brick surface, surface finished even and smooth without using extra cement, complete all as specified. |
| 22 | 10 mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement but using integral water proofing compound as per manufacturer,s instructions, complete all as specified.Note : Integral water proofing compound shall be measured & paid seprately. |
| 23 | 5 mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling, surface finished even and smooth without using extra cement, complete all as specified. |
| 24 | Supply only liquid water proofing admixture, complete all as specifed. |
| 25 | PCC 1:5:10 (nominal mix), type E-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed. |
| 26 | 75 mm thick PCC 1:3:6 (nominal mix), type C-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed. |
| 27 | 25 mm thick PCC 1:2:4, nominal mix, type B-1, using 12.5mm graded crushed stone aggregate as in leveling course as in roof paddingincluding filling of depressions and maintaining required slop including coved fillets, finished the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 28 | Cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75 mm thick as in plinth protection laid in slope 1:12 from outer edge of the wall finished even and and smoth w/o using extra cement ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) complete all as specified and as directed. |
| 29 | Coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 30 | Coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 31 | Machine cut kota stone in slab flooring 18-20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding, rubbing ,polishing to mirror finish complete over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed |
| 32 | Description as per srl item no. 47 above but as in riser to steps, skirting ,dado,window cills fixed over 10mm thick cement mortar 1:3, complete all as specified and as directed. |
| 33 | Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade, complete all as specified and as directed. |
| 34 | Chequered cement concrete tiles, machine pressed, factory made of size 30cmx30cm, 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 20 mm thick screed layer in cement mortar 1:6, complete all as specified. |
| 35 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. |
| 36 | factory made solid panel PVC door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, and jointing together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified. |
| 37 | Anodised aluminum (coustomised design heavy duty) door ,window frames ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as spfd and as directed . |
| 38 | Powder coated aluminium grill (powder coated or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and peration of handles and fixing approved anodised aluminium standard section around the pening, all complete as per requirement and direction of Engineerin-charge. |
| 39 | Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised luminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 40 | Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 41 | Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 42 | Factory made 30mm thick 100% Solid WPC Laminated Moulded Flush Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive, made from Extrusion process WPC foam sheet Single Extruded (inner) with having minium density not less than 650 Kg/cbm manufactured by ISO 9001-2015 Certified Company,having good screw holding capacity ( Screw Withdrawl Strength of 2000N(face) & 1100N (Edge), Minium Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant. WPC to be laminated with PVC foil of minium 14 micron thick of approved design pasted on both faces of shutter & Fixing Stainless Steel Butt Hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 43 | Factory made 30mm thick wire mesh solid PVC door shutter consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15mmx 15mm for top, lock and bottom rails. MS frames shall have a coat of metal primer of approved make and manufacturer 19mm x 19mm MS square tubes shall be covered with heat molded plain sheets channel made from 5mm (0.25 tolerance) thick PVC sheet of density 600Kg/CBM manufactured by an ISO 90012015 certified company of size 30mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90 degree on either side forming stiles, one of ghe 90 degree bend is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws, 5mm(0.25 tolerance) thick 140mm wide PVC sheet out of which 125 mm shall be flat and 15mm shall be bent in 90 degree on the inner side to form top and bottom rail and 155mm wide PVC sheet out of which 125mm shall be flat and 15mm shall be bend in 90 degree on both side to form lock rail.An additional 5mm (0.25 tolerance) thick PVC srip of 20mm width is to be struck on the interior side of the C-channel using PC solvent cement adhesive. Panel will be of GI/SS wire mess of 24 gauge to be fitted inside area of stiles and rails. The wire mess in top, bottom and lock rail is sealed with 15mm x 15mm tube with steel screw of size 13 x 6mm, 10mm (5mm x 2Nos) thick PVC strip of 25mm width is to be struck and nails on both side of GI wire mess interior at the top, bottom and lock rail. 10mm thick (5mm x 2 Nos) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail door to be fixed to frame with 3Nos MS powder coated butt hinge size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the wall of the MS tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. Complete all as directed and specified |
| 44 | Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified |
| 45 | PVC solid 18mm thick coloured sheetfor Cupboard shutters and shelves one side decorative laminated & other side balancing lamination sheet consisting of brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.All the edges shall be covered with 2mm thick edge bonding tape .all as specified and directed. |
| 46 | 40mm dia, cupboard knobs fixed with nut, screw andwasher of mild steel, bright finished, complete all as specified and as directed. |
| 47 | 100mm size hasp & staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified. |
| 48 | Sheet glass 3.00 mm thick ordinary quality and glazing with oil putty or wooden beads in squares exc. 0.5 Sqm in each pane, complete all as specified. |
| 49 | Butt hinges, aluminium alloy extruded B-22, 100 mm long (ISI marked), complete all as specified. |
| 50 | Butt hinges, aluminium alloy extruded C-21, 75 mm long (ISI marked), complete all as specified. |
| 51 | Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified. |
| 52 | Extruded aluminium alloy handle, fabricated type, anodised, 125 mm long (ISI marked), complete all as specified. |
| 53 | Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 200 mm long, complete all as specified. |
| 54 | S&F in repair for Curtain Rod of stainless steel 25 mm dia fancy type complete and hanging hooks/brackets / end caps of length 1.5 mtr to 1.8 mtr complete all as specified and directed. |
| 55 | CPVC pipe 20 mm outer diapipes SDR-11 & plain CPVC SDR 11 fillings fixed complete to walls and ceilings or laid in floors, complete all as specified. |
| 56 | CPVC pipe 25 mm outer diapipes SDR-11 & plain CPVC SDR 11 fillings fixed complete to walls and ceilings or laid in floors, complete all as specified. |
| 57 | CPVC 20 mm outer dia CPVC tank adapter complete all as specified. |
| 58 | GI water tubing, medium grade, 50mm bore with all fittings, fixed complete in spout, complete all as specified. |
| 59 | S&F in repair CP Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm borcomplete all as specified. |
| 60 | S & F in repair 20 mm Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule and fixed complete all as specified. |
| 61 | S&F in repair Stop valve cp cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, complete all as specified and as directed. |
| 62 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 63 | S&Fin repair Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, screwed down high pressure screwed for iron pipes complete all as specified and directed. |
| 64 | S&F in repair Angle cock 15mm Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed. |
| 65 | S&F in repair Two way Bib Taps 15 mm bore cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes. complete all as specified and directed. |
| 66 | S&F in repair Vitreous China squatting pan of pattern“long pan”, size 580 mm white with ‘P’ or‘S” trap, front or back inlet and foot restsany pattern (excluding flushing cisternand flush pipe), complete all as specified. |
| 67 | S&F in repair PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified and as directed. |
| 68 | S&F in repair Hand shower ( health faucet ) with 15 mm dia 1.2 meter long flexible braided chromium plated tube with wall hook.complete all as specified and as directed. |
| 69 | PVC connections in repair 15mm size with PTMT nuts of length 600 mm, complete all as specified. |
| 70 | PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified. |
| 71 | S&F in repair 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in CM(1:4) complete all as specified. |
| 72 | S&F in repair PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed. |
| 73 | S&F in repair PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed. |
| 74 | 110 mm bore PVC (SWR) bends any radius, complete all as specified. |
| 75 | 75 mm bore PVC (SWR) bends any radius, complete all as specified. |
| 76 | Brass chromium plated shower rose of 125mm size with or without swivel joints, fixed in repair complete all as specified. |
| 77 | Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repair ,complete all as specified. |
| 78 | S&F in repair sinks with drainage board made of stainless steel 0.8 mm thick kitchen or laboratory with plugs, including washers and waste pipe; and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr in charge. |
| 79 | Vitreous China, wash hand basin, flat back white of size 550mmx400mm with pedestal to match including brackets, including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified. |
| 80 | 15 mm bore centre hole Brass CP mixer for mixing hot & cold water screwed down for iron pipe, fixed in repair complete all as specified. |
| 81 | Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms), dia of discharge pipe 32mm, chain and plug, porcelain stopper, fixed in repair, complete all as specified & directed. |
| 82 | S&F Gratings CP of 100 mm dia, fixed in repairs, complete all as specified. |
| 83 | S&F in repair Stainless steel Plate rack 0.5 mm thick of size 750x750x250mm of standard quality and shape complete all as specified. |
| 84 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified. |
| 85 | Sheet glass bevelled edge mirror of selected quality glass of 5 mm sheet glass mounted to walls with fasteners or plugs of selected quality all as directed by Engineer in charge incl removal of existing broken/US glass mirror any size. complete all as specified. |
| 86 | Rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 ltrs, complete all as specified. |
| 87 | Preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over one coat of 01 mm thick POP wall care putty, complete all as specified. |
| 88 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc.and applying two coats of oil emulsion distemper over one coat of 01 mm thick POP wall care putty, complete all as specified. |
| 89 | Preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified. |
| 90 | Preparation of old plastered surfaces of ceiling and applying two coats of white wash, complete all as specified. |
| 91 | Prepration of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified. |
| 92 | Prepration of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified. |
| 93 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth insoft / loose soil and getting out, complete all as specified and as directed. |
| 94 | Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed. |
| 95 | Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified. |
| 96 | Sand cushioning to underground cables complete all as specified in clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified. |
| 97 | Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. |
| 98 | Salt glazed stoneware drain pipes 150mm bore laid in trenches and jointed complete all as specified & directed. |
| 99 | Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:4:8 (Nominal mix) type D-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed. |
| 100 | Taking down U/S aluminium point wiring (light, fan, socket or power ) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed complete all as specified and directed . |
| 101 | Point wiring for one light point/fan point /Exhaust fan point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor two single core multi strand flexible cable and 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green color) as earth lead and including PVC conduit along with modular sunken boxes of reqd size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. Note:- The rates are inclusive of cutting / chassis in wall & suitable PCC works including making good to disturbed surfaces. |
| 102 | Description all as per srl item No.101 above but for socket outlet 5 Amps on same board complete all as specified and directed. |
| 103 | Description all as per srl item No.101 above but for socket outlet 5 Amps on independent board complete all as specified and directed. |
| 104 | Description all as per srl item No.101 above but one bell point contolled by one push botton on independent board complete all as specified and directed. |
| 105 | Description all as per Serial item No 101 above but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead complete all as specified and directed. |
| 106 | Modular switch piano, single pole, one way 6 Amp, 1 module, 240 volts complete all as specified and directed. |
| 107 | Socket modular socket outlet 2 in 1, 3 Pin 6 Amp 2 module complete all as specified & directed. |
| 108 | Modular switch single pole, one way 16 Amp, 1 module, 240 volts complete all as specified and directed. |
| 109 | Modular socket out let 2 in 1, multipurpose 6 & 16 Amp 2 module complete all as specified & directed. |
| 110 | Modular fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically complete all as specified and directed. |
| 111 | Modular bell push , flush type, 5 amp shall be conformimg IS-3854 of 1988 , 240 volts complete all as specified and directed. |
| 112 | Modular bell ding dong , 230 volts, single pole complete all as specified and directed. |
| 113 | Ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm. complete all as specified and directed. |
| 114 | LED Tube light fitting, 1x 20 watts. Decorative ultra slim linear LED lighting fixture with co extruded polycarbonate body, environmental friendly, energy efficient ready to use pack complete rewired, Premium 20 W LED batten, connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core, including removing old/unsv, all as required at site or directed. |
| 115 | LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 116 | Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified. |
| 117 | Exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 118 | S & F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .(Note-MCBs will be measured separately.) |
| 119 | MCB, single pole, 5 to 32 Amp, with rupturing capacity 10 KA, 'B' curve , 240 Volt, including removal of old unsv ,complete all as specified. |
| 120 | MCB single pole and neutral 240 volts any rating upto 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables,including removing old/unsv,complete all as specified and directed. |
| 121 | MCB DB TPN 4 way with 200 amps rated busbar 415 V double door confirming to IP 43-IK complete with din rail, Neutral and Earthing bar complete all as specified. |
| 122 | MCB, TPN, 63 Amp, with rupturing capacity 10 KA, 'B' curve , 415 Volt, including removal of old unsv ,complete all as specified. |
| 123 | Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including removing old/unsv, all as required at site or directed. |
| 124 | Bracket of GI pipe 40mm dia medium grade of length 1.20m and fixed with clamps made out of 50x6mm with nuts and bolts, complete all as specifed & directed. |
| 125 | Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specifed & directed. |
| 126 | Replacement of service cable of size 6 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire or drawn in and including medium grade non metallic rigid PVC conduit as per site requirement, flat or circular all as required or directed. |
| 127 | XLPE insulated, armoured, heavy duty electric cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes/ducts or fixed to walls/poles including taking out old unvs cable complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately). |
| 128 | Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15mm bore including provn of concrete pit in PCC M-15, type B-I using 20mm graded crushed stone aggregates with 40mm thick precast cover of size 550 mm X 550 mm X 75 mm of RCC M-15, type B-I, reinforced with XPM (weight not less than 4 kg/ Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. |
| 129 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 32 of tender doucments. Please Enable Macros to View BoQ information |
