|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts and other incidentals . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 2 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Second class teek wood as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( one cement : one and half coarse sand : three graded stone aggregate 20 mm(twenty millimetre) nominal size). including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . |
| 5 | Steel reinforcement Thermo Mechanically Treated bars of grade Fe-500 (five hundered ) of Sail / TATA Tiscon/Shyam Steel/ Jindal panthar for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto plinth levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 6 | Structural steel work of (TATA,SAIL or RASHTRIYA ISPAT) riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 7 | Providing and fixing 0.60 mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing precoated galvanised steel sheet of Tata Durashine / Sail / Reliance in roofing accessories 0.50 mm (zero point fifty millimeter) (+0.05 %) (plus zero point zero five percent) total coated thickness, Zinc coating 120 (one hundred twenty) grams per sqm as per IS: 277 (indian standard two hundred seventy seven) , in 240 (two hundred fourty ) mpa steel grade, 5-7 (five - Seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 (fifteen - eighteen) microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm) (five hundred - six hundred millimeter) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing mild steel BP sheet 1.66mm (one point sixty six millimetre) to 2mm(two millimetre) thick in eaves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separtely including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 10 | Providing and fixing 12 mm (twelve millmeter) thick flat pressed 3 three) layer medium density particle board or graded particle board (Grade I) (one) IS: 3087 (Indian Standard : Three thousand Eighty seven) marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) and as per the direction of Engineer-in-Charge including entire carriage of material in all leads and lifts including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 11 | Providing and laying 600x600 mm (six hundred into six hundred millimetre) vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera, complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying 15 mm (Fifteen millimetres) cement plaster on the rough side of single or half brick wall of mix :1:6 (one cement: six fine sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 13 | Providing and fixing M.S. (Mild Steel) grills of required pattern in frames of windows etc. with M.S. (Mild Steel) flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to opening/ wooden frames with rawal plugs screws etc. upto floor all level including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing 35 mm (thirty five millimeter) thick glazed shutters for doors, windows and clerestory windows using 4 mm (four millimeter) thick float glass panes, including ISI marked M.S. (mild steel) pressed butt hinges bright finished of required size with necessary screws second class teak wood including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 15 | Providing and fixing wire gauge shutters for doors, windows using galvanised M.S (mild steel) gauge of IS gauge designation 85G (Eighty Five gram) with wire of Dia 0.56 mm (Zero point Fifty six millimeter) for doors, windows , clerestorey windows including bright finished black enamelled iron hinges with necessary screws with ISI marked stainless steel butt hinges of requiired size second class deodar wood complete upto floor all level including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fixing ISI (Indian standard Institute) marked flush door shutters conforming to IS : 2202 ( Indian Standard : Twnty two hundred two) (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm (thirty five (millimeter) thick including ISI (Indian standard Institute) marked Stainless Steel butt hinges with necessary screws complete upto floor all level including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing 20 mm (twenty millimetre) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws , wooden plugs and PVC sleeves etc., wherever necessary complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 18 | Providing and fixing aluminium tower bolts, ISI (Indian Standard institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian Standard one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10mm( one hundred fifty into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 19 | Providing and fixing aluminium handles, ISI (Indian Standard institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) (Indian Standard one thousand eight hundred sixty eight) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (one hundred twenty five millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 20 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 (Ten) as per IS:1868 (Indian Standard one thousand eight hundred sixty eight) transparent or dyed to required colour or shade with necessary screws etc. complete 125x63x4 mm (one hundred twenty five into sixty three into four millimeter) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 21 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 22 | Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete and as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 23 | Finishing with Deluxe Multi Surface Paint system for interiors and exteriors using primer as per manufacturers specifications painting wood work with Deluxe Multi Surface Paint to give an even shade two or more coats applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter/ ten square metre) over an under coat including one coat of special primer applied @ 0.75 ltr/ 10 sqm (zero point seven five liter/ ten square metre) of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 24 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 (fifty ) metres lead in cement mortar as per direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality, malkana ,toll tax, GST or other taxes imposed by the Government . |
| 25 | Demolishing cement concrete work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 (fifty )metres lead nominal concrete 1:3:6 (one cement : Three coarse sand : six graded stone aggregate ) or richer mix (i/cequivalent design mix) and as per direction of Engineer - in- charge including entire carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 26 | Providing and fixing 12mm (twelve millimeter ) thick in wall lining flat pressed three layer (medium density) particle board or graded wood Pre laminated one side decorative lamination and other side balancing lamination Grade I (one) , Type II (two) , IS : 12823 (indian standard : twelve thousand eight hundred twenty three) marked, including priming coat on unexposed arrangement and screws etc. complete and as per direction of Engineer - in- charge including entire carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 27 | Providing and fixing 12mm (twelve millimeter ) thick second class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface complete and as per direction of Engineer - in- charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 28 | French spirit polishing Two or more coats on new works including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government. |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) (CERA, HINDWARE, PARRYWARE, mak ) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever),conforming to IS : 7231 (Indain Standard : Seventy two hundred thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI (Indian Standard Institute) marked white solid plastic seat and lid complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing wash basin (Hindware/ Cera/ Jaquar) with C.I. ((cast iron) brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China wash basin size 550x400 mm (five hundred fifty into four hundred millimeter) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 32 | Providing and fixing Led 55 inch Sony or equivalent brand including entire carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing AC 1.5 (one point five ) tonne superior quality of voltas, LG, Loyd including entire carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 34 | Providing set of two chair and one table of Superior quality including entire carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing curtain of size four inch into nine inch of superior quality including entire carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 36 | Providing Bed of superior quality wood including entire carriage of materials in all leads and lifts including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 37 | Providing Mattress of superior quality including entire carriage of materials in all leads and lifts including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 38 | Stone tile (polished) work for wall lining over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement : three coarse sand) and cement slurry @ 3.3 kg/sqm (three point three kilogram per square meter) including pointing in white cement complete Granite of any colour and shade complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
