|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m(one point five metre) in width or 10 sqm( ten square metre on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, (one point five metre) including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.(fifty metre) as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 2 | Stone soling properly hand packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP:PWD., specification 100mm(one hundred millimeters) spread thickness ( finished work including materials and labour) in all leads and lifts and dressing of sides and bottom and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 3 | Providing and laying in cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (one cement: three sand: six graded stone aggregated 20mm (twenty millimeters) nominal size, as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 4 | Providing and laying cement concrete flooring 1:2:4 (one cement : two sand: four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the costof nosing of steps etc. complete 40mm (forty millimetre) thick with 20mm (twenty millimetre) nominal size stone aggregte upto all floor level as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 5 | Providing and fixing Air walker with the dimesion 1100x460x1480mm ( one thousand one huhdred into four hundred sixty into one thousand four hundred eighty millimeters) size supporting tube 38x3mm (thirty eight into three millimeters) steel pipe of gig pipe with size main tube 114x3.75mm (one hundred fourteen into three point seven five millimeter) stone pipe or gi pipe complete powder coat,as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 6 | Providing and fixing pull Chair/shoulder press with the dimesion 800x850x1710mm ( eight hundred into eight hundred fifty into one thousand seven hundred ten millimeters) size main central pipe 100mm (one hundred millimeters) nominal bore G.I. pipe ring wheel 32mm (thirty two millimeters) pipe of spokes of wheel 15mm (fifteen millimeters) and connector pipe 32mm (thirty two millimeters) nominal bore G.I. pipe MS foundation plate 10mm (ten millimeters) thick and wall bearing, foundation pipe with anchoring 750mm (seven hundred fifty millimeters) deep G.I. pipe supplrting with MS angle 25x25x4mm (twenty five into twenty five into four millimeters) and as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing Leg shaper with the dimesion 1800x650x1600mm (one thousand eight hundred into six hundred fifty into one thousand six hundred millimeters) size main central pipe 80/100 (eighty/one hundred) nominal bore G.I. pipe moving frame pipe 32/40mm (thirty two/forty millimeters ) nominal bore G.I. pipe. Foundation pipe with anchoring 500mm (five hundred millimeters) deep G.I. pipe supporting with MS angle 25x25x4mm (twenty five into twenty five into four millimeters) seat and bock rest 2mm (two millimeters) thick G.I. seat with uniform bedding radius to avoid sharp edges, and as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing Chest press/push chair and as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing surf board/Air swing as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 10 | Providing and fixing Tyachi/Tyachi spinner as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 11 | Providing fixing Triple twister with the diminsion 1174x600x1450mm (One thousand one hundred seventy four into six hundred into one thousand four hundred fifty millimeters) main central pipe 100mm (one hundred millimeters) nominal bore G.I. pipe. Standing/sitting twister frame pipe 32mm (thirty two millimeters) nominal bore G.I. pipe and ball bearing ratating disk support pipe nominal bore and wall thickness 100mm (one hundred millimeters) NB with 3.6mm (three point six millimeters) thick foundation pipe with anchoring 500mm (five hundred millimeters) deep G.I. pipe supported with M/S angle 25x25x4mm (twenty five into twenty five into four millimeters), as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing fixing double cross trainer as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 13 | Providing fixing double sky walker as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing Monkey bar with the dimesion 3300x1410x246mm (three thousand three hundred into one thousand four hundred ten into two hundred forty six millimeters) nominal bore G.I. pipe horixontal pipe 40mm (forty millimeters) nominal bore G.I. pipe foundation pipe with anchorring 500mm (five hundred millimeters) deep G.I.pipe supporting with MS angle 25x25x4mm (twenty five into twenty five into four millimeters) colour customixable multi colour and complete powder coat, as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 15 | Providing and fixing Chest and shoulder press with the dimesion 2070x700x200 (two thousand seventy into seven hundred into two hundred) size of supporting 75x3mm (seventy five into three millimeter) steel pipe for GIG pipe size of main tube 115x3.75mm (one hundred fifteen into three point seven five millimeter) steel pipe of GIG pipe colour customizable multi colour and complete powder coat as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fiing 2 in 1 hip Twister as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 17 | Providing and fixing stepper with Twister as per direction of Engineer- in -Charge, including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. |
| 18 | Providing and laying cast iron outdoor benches with 3 (three) seater capacity, arm rest and back for outerdoor garden as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
