|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 2 | Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials an disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and pai for separately) For all thickness of tiles 25mm and upto 40mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 3 | Dismantling Hard board lining /ceiling upto all floor level including stacking of serviceable materials an disposal of un-serviceable materials within all leads For all thickness of Boards upto25 mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 4 | Providing wood work in frames of False ceiling partitions etc Rai/ Chil wood including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 5 | Providing and fixing 9mm thick commercial ply wood ceiling / plain lining of approved quality with necessary screws, nuts & blots, nails etc complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 6 | Providing and fixing12mm thick commercial ply wood ceiling / plain lining of approved quality with necessary screws, nuts & blots, nails etc complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 7 | Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 8 | Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 9 | Providing and fixing 12mm thick pine wood plank of approved shade and colour in ceiling including mitring at junctions, butt jointing and nails complete (frame work for base to be measured and paid for separately) including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 10 | Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 11 | Providing and fixing corner Hard Wood Beading 40x12mm thick in section includung fixing with necessary nails and screws etc. Complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 12 | Providing and Fixing LG 1.5mm thick PVC antistatic vinyl floooring plain, carbed or mosaic/metalled finish laid with approved on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials in all leads and lifts |
| 13 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement: 3 coarse sand): 6 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 15 | Providing and layingCeremic floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(i) Size of Tile400x400 mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 16 | Providing and laying ceramic glazed wall tiles with different size conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 17 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge,Fixed with approved adhesive including rubbing and polishing complete with :Granite stone including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 18 | Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as perdesign approved by Engineer-in-Charge:- Granite work. including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 19 | Providing and fixing bright finished brass Furniture handle including carriage of materials within all leads and lifts.(i) 100mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :(i) For Fixed Portion (a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 21 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 22 | Providing and fixing 4.00mm thick ACP sheet of approved shade interior grade for partition/ window shutter both side laminated with PVC gasket etc. complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 23 | Providing and fixing sliding roller for sliding shutter including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 24 | Providing and fixing Ornamental fancy curtain rod 25mm dia with brackets, end firnels and screws etc.complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :(i) 125mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials and as per the direction of the Engineer-in- Charge. |
| 27 | Painting Wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactur including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 28 | Melamine polishing on wood work (two or more coat) complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 29 | Providing and fixing P.V.C. Cistern of approved quality 10 ltr net capacity including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 30 | Providing and Fixing Plastic seat and Cover with necessary fitting (i) Solid type White plastic seat and Cover including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 31 | Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 32 | Providing and fixing Glass shelve including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 33 | Providing and fixing C.P. Soap dish including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 34 | Providing and fixing C.P. brass angle cock 15mm (fifteen millimetre) nominal bore including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 35 | Providing and fixing 15mm nominal Bib Tap Long body of approved quality complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 36 | Providing and fixing PVC connection pipe with brass unions :(a)45 cm length (i) 15 mm nominal bore including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 37 | Providing and fixing CP. Brass 25Cm DiaTowel Ring with fittings including carriage of materials within all leads and lifts. |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :(i) 600x510 mm bowl depth 200 mm including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 39 | Providing and fixing 15mm nominal bore C.P. brass Sink mixer Ess Ess Make of approved quality conforming to IS:8931 complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 40 | Providing and fixing CP Waste 32mm dia for wash basin including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 41 | Providing and fixing PVC floor trap 100 X 75 mm dia size complete. including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 42 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete75 mm Dia Type-B including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 43 | Providing and fixing110 mm dia PVC Finolex Door Bend type-B ISI marked including fixing with approved adhesive etc. complete. including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. (i)75 mm Nominal Size |
| 44 | Providing and fixing 75 mm nominal size PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 45 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 46 | Providing and fixing C.P flange i including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
