|
| 1 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.50 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) Above plinth level upto floor all level complete as per directions and approval of Engineer-in-charge including carriage of materials within all leads and lifts |
| 2 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size.) |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm. |
| 5 | Providing and fixing 6mm PVC wall panelling/linning including carriage of material in all leads and lifts as per ditection of Engineer-in Charge. |
| 6 | Providing and fixing polycarbonated transparent sheet 2.00mm thick in roofing with galvanised Jor L hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories asrequired in all leads and lifts as per direction of Engineer-in-charge |
| 7 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts |
| 9 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied of approved brand and manufacture complete including carriage of materials within all leads and lifts |
| 10 | Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within all leads of G.S. Sheet including carriage of materials within all leads and lifts. (i) G.S. Sheet |
| 11 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 12 | Providing and fixing polycarbonated transparent sheet 2.00mm thick in Ridge 600mm with galvanised Jor L hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories asrequired in all leads and lifts as per direction of Engineer-in-charge |
| 13 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.complete. including carriage of materials within all leads and lifts.:- Rae wood/chill wood |
| 14 | Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts |
| 15 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 16 | Providing and fixing MSBP sheet 2.00 mm thick in eaves board/faciasoffits/ ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge |
| 17 | Providing and fixing M.S sliding door bolts, ISI marked e, with nuts and screws etc. complete : 250x16mm. |
| 18 | Providing and fixing M.S handle, ISI marked , with nuts and screws etc. complete : 100mm. Please Enable Macros to View BoQ information |
