|
| 1 | Earth work in bulk excavation in all kinds of soil by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres in All kinds of soil : |
| 3 | Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming to achieve desired compaction incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 4 | Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 6 | Reinforced cement concrete work in Columns, beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 7 | Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 8 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Foundations, footings, bases of columns etc. for mass concrete complete job |
| 9 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Lintel, beams, plinth beams, girders, bressumers and cantilevers complete job |
| 10 | Centring and shuttering of kit ply including propping, strutting & removal of the same in Suspended floors, slabs etc complete job |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length in First Class Imported Wood incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 13 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 14 | Providing and fixing 30mm thick panelled or Panelled and glazed Shutters of Ist class Imported wood for doors using panelling of 19mm thicl KD Wood panels and using 4mm thick float glass panes including ISI marked MS pressed Butt hinges bright finished of required size and make as directed by Engineer In Charge with necessary screws incl all costs and carriages of all the materials involved upto site of work complete |
| 15 | Providing and fixing 30mm thick imported Wood wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge incl all costs and carriages of all the materials involved upto site of work complete |
| 16 | Providing and fixing 4mm thick glass panes with putty and glazing clips or wooden fillets in doors, windows, clerestory windows, all complete with incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 17 | 12 mm thick cement plaster in 1:4 mix (1 Cement : 4 Fine Sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job (Interior) |
| 18 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incl all costs and carriages of all the materials involved upto site of work complete |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With ready mixed pink or grey primer on wood work (hard andsoft wood) having VOC content less than 50 grams/ liter including all leads, lifts, costs and carriages upto site of work complete job |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces including all leads, lifts, costs and carriages upto site of work complete job |
| 21 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically treated bars incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 22 | 12 mm thick cement plaster in 1:4 mix (1 Cement : 4 Fine Sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job (Exterior) |
| 23 | Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) including all leads, lifts, costs and carriages upto site of work complete job |
| 24 | Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing of Prince, Supreme, Vectus or equivalent ( heavy duty) make. This includes cost of cutting chases and making good the same incl testing of joints complete as per direction of Engineer-in Incharge. (Concealed work incl cutting chases and making good the walls etc) PN -16 pipes, 25 mm OD |
| 25 | PN -16 pipes, 32 mm OD |
| 26 | Structural steel work welded in built up sections, hollow sections etc incl. cutting,hoisting and fixing in position and applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 27 | Providing corrugated G. S. sheet roofing 0.50 mm thick with zinc coating not less than 275 gram/m2 including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 28 | Providing ridges or hips of width 60cm overall width plain G.S. sheets 0.50 mm thick with zinc coating not less than 275 gram/m2 fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job |
| 29 | Providing and fixing rectangular high density polyethylene water storage tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. per liter capacity |
| 30 | P/F Aliminium anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. of reputed make and model as directed and approved by Engineer in charge incl cost of necessary screws nails etc complete in all respects |
| 31 | Al Drop with inbuilt Lock |
| 32 | Towerbolts 150mm |
| 33 | Towerbolts 100mm |
| 34 | Handles 125mm |
| 35 | Handles 100mm |
| 36 | P/F of 25mm dis PVC conduits in RCC Slab before execution of concrete as per the approved plans incl all bends sockets junction boxes of required size and shape as per the electrical plans incl all costs and carriages complete |
| 37 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600mm) including all leads, lifts, costs and carriages upto site of work complete job |
| 38 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge with Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 39 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 40 | Providing and fixing P.V.C Soil, waste, Rain water Pipes,vent pipes ISI mark like Prince B-type or equivalent including all fittings with or without access of any degree i.e bends, junctions, cowls, offsets, access pieces, holder bats and structure steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts, etc and jointing with solvent/seal joints including cutting holes in walls and floors incl all neseccary fittings like bends, sockets Tees etc 100 mm dia |
| 41 | 75 mm dia |
| 42 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 like Jaquar, cerra, Jhonson or equivalent incl all costs and carriages |
| 43 | Providing and fixing 15 mm nominal bore C.P. brass Basin Mixer ofapproved quality conforming to IS : 8931 like Jaquar, cerra, Jhonson or equivalent incl all costs and carriages |
| 44 | Providing and fixing 15 mm nominal bore C.P. angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incl all costs and carriages complete |
| 45 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge incl all costs and carriages complete |
| 46 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour with 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 47 | Providing and fixing CP/Stainless Steel nahani or gully trap with 100 mm dia steel gratings floors with cement mortar 1:3 complete job Please Enable Macros to View BoQ information |
