|
| 1 | site clerance |
| 2 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item B) and disposal of excavated to a distance up to 50 M. including all lifts ,leveling ,ramming the foundation ,trenches removing roots of trees ,shrubs all complete as per approved design ,building specification and direction of E/ |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 4 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. BCD - 5.2.3. |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 11 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 18 | Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/ |
| 19 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 20 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 21 | Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I. |
| 22 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I |
| 23 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/ |
| 24 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 25 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I. |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 27 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge. |
| 28 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C |
| 29 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 30 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 31 | Colour washing two coats over a coat of plastic emulsion paint over new surface with approved quality of lime in approved shade including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing,scaffolding,washing,of floors and taxes all complete as per building specification and direction of E/I. |
| 32 | Providing two coats of painting with ready mixed paint of approved shade and make over steel surface … |
| 33 | Point wiring in PVC Conduit ,with piano type switch:- Wiring for light point /fan piont/Exhaust fan point/call bell point etc Group C |
| 34 | Wiring for Twin control point with 1.5sq mtr mm FRPVC insulated copper conductor single core cable in surface/recessed PVC Conduit 2way piona type switch phenolic liminated sheet with suiatable size PVC/MS Box etc as required |
| 35 | Wiring for light/power plug with 4×4 sq mm FR PVC insulated copper conductor single core cable in surface/racessed PVC Conduit along with2NO 4sq mm FR PVC insulate copper conductor single core cable for loop earthing etc as required |
| 36 | Wiring for circuit/submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable in surface/racessed PVC Conduit as required 2×1.5sq mm +1×1.5sq mm |
| 37 | 2×2.5sq mm +1×2.5sq mm |
| 38 | 2×4.0sq mm +1×4.0sq mm |
| 39 | S/F PVC conduit:- Supplying and fixing of following size of PVC Conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required |
| 40 | S/F PVC /G.I Boxes:- Supplying and fixing of following size of PVC/G.I Box on surface/recesswith suitable size of phenolic limineted sheet cover in front including painting etc as required 75mm×75mm×50mm deep |
| 41 | 72mm×226mm×48mm deep |
| 42 | S/F Piano type h/socket:- Supplying and fixing of following Piano type switch/socketon the existing switch box /cover including connections etc. as required. 5/6 amps one way switch |
| 43 | 3 pin 5/6 amps,socket outlet |
| 44 | Supplying and fitting and fixing 9/10 watt LED Bulb |
| 45 | Supply and fixing 1200mm BLDC 5 star rating 32W Ceiling Fan |
| 46 | Add Carriage Cost of Materials Cement+Steel LEAD 10 km |
| 47 | sand lead 25 km |
| 48 | chips lead 22 km |
| 49 | Bricks lead 75 km |
| 50 | Supplying and Laying of PVC Pipe -do-do-E/I 15mm Dia |
| 51 | 20mm Dia |
| 52 | 25mm Dia |
| 53 | Providing and fixing 15mm dia brass bib cock of approved quality all complete as per specification and direction of E/I 15mm dia |
| 54 | Providing and fixing 15mm dia brass stop cock of approved quality all complete as per specification and direction of E/I 15mm dia |
| 55 | Providing and fixing Gun metal non return volve approved quality all complete as per specification and direction of E/I 15mm dia |
| 56 | Making holes in walls for PVC pipe and restoring the same all complete (water supply pipe) (b) 125mm dia |
| 57 | S/F/F 40mm high vitreous white glazed earthen E.WC with 'P' Trap of Parry |
| 58 | Providing and and fixing 110mm dia UPVC Tee door single Qaulity |
| 59 | Providing and and fixing 110mm dia UPVC pipe |
| 60 | Providing and and fixing 110mm dia UPVC Band |
| 61 | S/F/F UPVC Fitting (i) Crowel 100mm dia |
| 62 | (ii) floor trap 100mm dia |
| 63 | Supplying materials and labour for constructing inspection chamber of designation class 75B brick sixe 750mm deco 600×450mm internal dimention having 250mm all thickness in cement plaster(1:4) with punning on inside and cement plaster (1:6) specification all cost complete as per direction of E/I |
| 64 | Supplying fitting & fixing PVC water storage tank -do-do-E/I |
| 65 | Cost of drilling 200×165×125mm deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic D.T.H rig machine all complete including supplying all materials,tools ,drilling rig air compressor and equipment as well as fuel laboricants and cost of transportation of rig machine and other vehicles upto the site 1.from 0-50mtr depth below G.L |
| 66 | 2.from 50-150mtr depth below G.L |
| 67 | Supplying all tols tackles & lowering of 200mm mm dia MS ERW Casing pipe of 6mm wall thickness including all taxes,VAT,Excise duty,freight charges with inspection chaeges etc as applicable etc all complete job |
| 68 | Supplying all material, labour & equipment of fittting 200mm dia m.s cap cover casing pipe all complete job |
| 69 | Supplying ,flat flexible submersible cable with copper conductor PVC insuleted & PVC sheathed as per IS:7098 3core 6 sq mm |
| 70 | supplying Fitting & fixing make 1.5 H.P Submersible pump 150mm Dia (with Bronze impleller)upto 8 stage |
| 71 | supplying Fitting & fixing fully Automatic star delta stater to oprete induction motor working on415Volt 3Phase 50HZ with No Volt coil over load element ON-OFF push bottons with necessary materials and connected to supply, etc complete stater with original sheet steel incloser as per IS:3914 |
| 72 | add S/B & PHOTOGRAPHY |
| 73 | Add . 18 % GST |
| 74 | add 1 % labour cess Please Enable Macros to View BoQ information |