|
| 1 | Supplying and laying Rubberised interlocking paverblock M40 grade poviding and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver block in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shape of approved nonn skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping transporting loading unloading of laying paver block as per standard specification. Data-425 |
| 2 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Data-257. |
| 3 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification. Data-37 |
| 4 | Fabricating,supplying and fixing of roofing with Polycarbonate sheet of 6mm thick over structural steel work made using MS pipes and Angles plates and round bars etc., conforming to IS Standards. excluding the rate of MS pipes & Angles, including cost of labourThe sheet used to be got approved by the Departmental officers before use on work.(PWD SOR 2025-26 M-0718 Pg.No. 124). |
| 5 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. Data-195. |
| 6 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.. Data-297. |
| 7 | supply and fixing of Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick to be laid on floors and walls for Design purposes. The cost includes delivery to site, cutting to appropiate size, nosing and polishing etc., complete. Data-254. |
| 8 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steelpipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc. complete M-0651 |
| 9 | Supply and Installation of fully body Granite pillars of size 300mmx300mmx3m of synthetic grey colour for providing pergola design purposes. Each pillar weighs approximately 1250kgs carved out of single stone. The pillar is transported to the site using rented cranes used for loading and unloading purposes.The pillars are installed onto the site by digging a pit of size 600mmx600mmx600mm and placed inside using the help of crane and secured in place by using column mat steel and well concreted. since the weight of the pillars are high, the crane used for placing the pillars should be used hold the pillars in position for a minimum of two hours. The rate includes cost of conveyance to site,transportation,earthwork,concrete, crane rental charges and all nosing and polishing works etc., complete |
| 10 | Providing Granite Kerb of 0.38m height and 0.100 m thick around planter boxes for gardening purposes -(PWD SOR 2025-26 HW-M003 Pg.no.315) |
| 11 | PEBBLE BED STONE LAYING :Supplying and laying pebble bed (stone size 12 to 25mm ) in the 8 walk area as it should be got approved by Concern department Engineer before use on work. |
| 12 | Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover) |
| 13 | Supplying and fixing in position best quality approved make Fancy Granite coloured earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin over a Ms grilled pedestral filled with coloured pvc balls and ropelight with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 14 | Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges. |
| 15 | 110mm dia pipe |
| 16 | 110mm dia elbow |
| 17 | 110mm dia tee |
| 18 | Gardening & Landscaping : Providing various kinds of indoor plants such as peace lily,syngonium,white syngonium,aglaonema,Dracaena trifasciata,Philodendron selloum etc., by providing required fertile soil & coco peat stratum which improves and promotes plant growth. |
| 19 | Supplying and fixing of Stainless steel sheet Laser Cut special design Main gate for park entrance.The gate is of double door design which is of size 1.45m x 2.4m high. The frames are made out of 50mmx50mmx6mm square hollow pipes and the stainless sheet is made of 6mm thick of 304 grade jindall,tata steel equivalent make of size 1.4x2.3m. Design is made by make lase cut holes of size 0.15mx0.15m using laser cutting machine and geometrically placed . The gate is very heavy due to the 6mm sheet so it is secured on the gate frames using heavy duty hinges and welded and bonded together. The rate includes supply to site, fixing and polishing, cost of labour etc., complete. |
| 20 | Providing Army fencing using plain barbed wire (and/or razor wire/tape) and steel pickets over the already placed grills for security purposes. The rate includes cost nof conveyance to site, installation, welding charges etc., complete |
| 21 | Aluminium Diecast Letters 6'' size (PWD SOR 2025-26 M-0693) |
| 22 | Providing and fixing of Special Type Mirror of size 1000 x 780mm including cost of stand,labour charges for fixing etc., complete as per standard specification. as directed by the departmental engineers. (PWD SOR 2025-26 M-0568) |
| 23 | Supply and fixing of Book shelf made out of hardwood of oval shape of height 1.5m and width 1.2m at the centre. The shelf is equipped with shelves of 0.38m depth and 5 shelves of different lengths. The book shelf is secured onto the pillars osing MS L angles of size 32mmx32mmx6mm and 12mm anchor fastener bolts. the rate includes cost of conveyance,installation and taye of labour etc., complete. |
| 24 | Providing Name board for the park using seasoned teakwood scantlings of size 1.5m width. The plank is then melamine polished two coats and the letters are made using 5mm acrylic sheet cut pieces 10cm height double layer. The cost includes rate of conveyance,installation,rate of labour etc., complete. |
| 25 | Providing Seamless Stainless steel pipes of 20mm dia and 1.6mm thick to be used in grills for design purposes. The cost include conveyance to site,cutting,welding,polishing charges etc., complete. ` Please Enable Macros to View BoQ information |
