|
| 1 | Dismantling the existing damaged Plain cement concrete surface including dismantling clearing away and carefully stacleing materials useful for reused for any thinlenes of wass etc.,Complete as per standard specifications |
| 2 | Dismantling the existing damaged Brick Masonry in cement mortar walls surface including dismantling clearing away and carefully stacleing materials useful for reused for any thinlenes of wass etc.,Complete as per standard specifications |
| 3 | Dismantling the existing damaged Reinforced Cement Concrete in slab including dismantling clearing away and carefully stacleing materials useful for reused for any thinlenes of wass etc.,Complete as per standard specifications |
| 4 | Earth work excavation for foundation in all kinds of soils and sub soils to full depth as directed by the departmental officers except hard rock requiring blasting inclusive of shoring strutting and balling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth with in the compound in places shown by the departmental officers with initial lead of 10 meters and initial lift of 2 meters including clearing leveling the site etc., complete complying with standard specification (TNDSS No. 23, 24) |
| 5 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers |
| 6 | Centering for soffits of RCC slabs plane surface including strutting upto 3.00m height using mild steel of size 90cmx60cmx10 gauge fitted with MS angle of size 25mmx25mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced at 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification |
| 7 | a) Side Wall ( Without strutting) |
| 8 | b) For Column |
| 9 | Brick work in CM 1:5 (one cement & five M Sand ) use FLY ASH BRICK of Size 230mmx110mmx70mm Virtudly the Brick shall be sound compact and uniform in shape froce from visible creacks worppge flone an organic matter. the brick shall be solid with froge on ine of its bearing side class designation no less then 35/kgsm an average ampressine strength in including finishing, curing, etc., complete |
| 10 | Reinforced Cement Concrete 1:1.5:3 (one cement, one and half M Sand and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 11 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 12 | Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 14 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 15 | Painting New Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 16 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with One coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 17 | Supply and delivery of PVC Pipe Pipes Specials approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete. |
| 18 | 40mm PVC 6kg Pipe |
| 19 | 40mm PVC Elbow |
| 20 | 40mm PVC Cupling |
| 21 | 32mm PVC 6kg Pipe |
| 22 | 32mm PVC Elbow |
| 23 | 32mm PVC Cupling |
| 24 | 32mm Gm Gate Valve |
| 25 | 40mm Gm Gate Valve |
| 26 | 20mm G.I Pipe medium |
| 27 | 20mm G.I Bend |
| 28 | 20mm G.I Coupling |
| 29 | 20mm PVC Tap |
| 30 | PVC Tank (3000 Lit) Please Enable Macros to View BoQ information |
