Tender For Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Govt. Senior Secondary School Dhaliara Tehsil Dehra District Kangra (Hp)Construction Of Civil Work, Sanitary Work & Sewerage Work, Road Work, Rain Water Harvesting Tank, Under, Dehra-Himachal Pradesh

TDR : 54388017

Tender Notice
BOQ

9 Days Left

Dehra , Himachal Pradesh

Tender Brief : Tender For Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Govt. Senior Secondary School Dhaliara Tehsil Dehra District Kangra (Hp)Construction Of Civil Work, Sanitary Work & Sewerage Work, Road Work, Rain Water Harvesting Tank, Under

Document Fees
₹ 5000 /-

EMD
₹ 3612400.0 /-

Tender Value
₹ 26.12 Crore /-

Submission Date
15-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2	Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (Twenty percent) including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3	Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm at the rate seven point five litre per square metre of the vertical surface of the substructure to a depth of 300mm (Three hundred millimetre) including excavation channel along the wall & rodding etcetera complete. With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4	Treatment of soil under floors using chemical emulsion @ one litre per hole, 300mm (Three hundred millimetre) apart including drilling 12mm (Twelve millimetre) diameter holes and plugging with cement mortar 1 :2 (One cement isto two Coarse sand) to match the existing floor : With Chlorpyriphos/ Lindane E.C. 20% (Twenty percent) with 1% (One percent) concentration complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5	Providing and filling in plinth with stone under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
7	Providing and laying in position cement concrete 1:2:4 (One cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8	Providing and laying in position cement concrete 1:4:8 (One cement isto four coarse sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
9	Providing and laying in position cement concrete 1:5:10 (One cement isto five coarse sand isto tengraded stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering, All work upto plinth level including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10	Making plinth protection 50mm (Fifty millimetre) thick of cement concrete 1:3:6 (One cement isto three coarse sand (zone- III) isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) over 75mm (Seventy five millimetre) thick bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing & finishing the top smooth including carriage of materials in all leads and lift as per direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
11	Synthetic Polyester triangular fibre of length 12mm, (Twelve millimetre) effective diameter 10-40 microns andspecific gravity of 1.37 (one point thirty seven) in cement concrete / RCC / Flooring / water retaining structures by using 125gms of synthetic Polyester triangular fibre for 50 Kg (Fifty kilogram) cement used including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
13	Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14	Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etcetra with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Suspended floors, roofs, landings, balconies and access platform, and the like floor, etcetra up to any thickness, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
15	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
16	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera complete as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
17	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases (except spiral stair cases) with slopping or stepped soffits excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
18	Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
19	Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Cornices and mouldings including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20	Providing tor steel reinforcement of Jindal Panther/Tata/Sail for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of grade Fe-550D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
21	Providing and filling in position, blown bitumen in expansion joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22	Providing and fixing in position 12mm (Twelve millimetre) thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
23	Providing and fixing 150 mm (One hundred fifty millimetre) wide Aluminium fluted strips 3.15mm (Three point one five millimetre) thick sheet covering over expansion joints with iron screws as per design complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
24	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, in all work upto plinth level using minimum cement content not less that 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing completed and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead, lift and other incitental as per specification approved drawing designand as per direction of Engineer-in-charge.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
25	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (M-Thirty) design mix to obtain the compressive strength of 30N/mm Square (Thirty newton per square millimetre) for reinforced cement concrete work, up to floor all level using minimum cement content not less that 360 KG/Cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix to give a smooth surface mechanically mixed and vibrated including curing completed and pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work including carriage of material within all lead, lift and other incitental as per specification approved drawing designand as per direction of Engineer-in-charge.The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
26	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
27	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
28	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
29	Providing and placing in position 2 Nos (Two numbers) 6mm (Six millimetre) dia M.S. bars at every third course of half brick masonry complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
30	Providing and fixing 18mm (Eighteen millimetre) thick granite of any colour and shade area of slab upto 0.50 Sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
31	Providing and fixing 18mm (Eighteen millimetre) thick granite of any colour and shade area of slab over 0.50 Sqm gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
32	Providing edge moulding to 18mm (Eighteen millimetre) thick Granite work marble stone counters, Vanities etcetera, including machine polishing to edge to give high gloss finish etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
33	Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite stone work, including necessary holes for pillar taps etcetra including moulding, rubbing and polishing of cut edges etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
34	Providing and fixing Granite Stone slab of approved shade with table rubbed, edges rounded and polished, of size 75x50cm (Seventy five into fifty centimatre) deep and 1.8cm (One point eight centimatre) thick, fixed in urinal partitions by cutting achase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete1:2:4 (One cement isto two coarses and isto four graded stone aggregate 6mm (Six millimetre) nominal size and finished smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
35	Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugso dash fastener shall be paid for separately). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
36	Providing Kiln seasoned and chemically treated hollock wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugso dash fastener shall be paid for separately). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
37	Providing and fixing 35mm (Thirty five millimetre) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
38	Providing and Fixing 1.00mm (one point zero zero millimetre) thick decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
39	Providing lipping with 2nd (Second) class teak wood battens 25mm (Twenty five millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40	Rectangular or squar vision panel area not exceeding 0.1 Sqm (Zero point one square metre) in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
41	Cutting rebate in flush door shutters (Total area of the shutter to be measured) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42	Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etcetera 2nd (Second) class teak wood 50x12mm (Fifty into twelve millimetre) complete as per specification, drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
43	Providing 40x5mm (Forty into five millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with10mm (Ten millimetre) dia meter bolts,nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete as per specification,drawing, design and direction by the Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
44	Providing and fixing 250x10mm (Two hundred fifty into ten millimeters) bright finished brass tower bolts (Barrel type) with screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
45	Providing and fixing 200x10mm (Two hundred into ten millimeters) bright finished brass tower bolts (Barrel type) with screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
46	Providing and fixing bright finished brass 100mm (One hundred millimetre) mortice latch and lock with 6 (Six) levers and a pair of lever handles of approved quality with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
47	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80kg (Thirty six kiligram to Eighty kilogram) and door width from 701mm to 1000mm), (Seven hundred one millimetre to ten hundred millimetre) with double speed adjustment with necessary accessories and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
48	Providing and fixing 125x75x4mm (One hundred twenty five into seventy five into four millimetre) ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
49	Providing and fixing 100x75x4mm (One hundred into seventy five into four millimetre) ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary or shade with necessary screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
50	Providing and fixing frame work for partitions/wall lining etcetera made of 50x50x1.6mm (Fifty into fifty into one point six millimetre) hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60cm (at the rate Sixty centimetre) centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ceiling/ floors with steel dash fasteners of 8mm (Eight millimetre) diametre, 75mm (Seventy five millimetre) long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etcetra, including providing with two coats of approved steel primer etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST or any taxes imposed by the Government.
51	Steel work Tata/Sail / Reliance/ Jindal welded in built up sections, trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etcetera as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Toll Tax Sales tax or any other taxes imposed by the Government.
52	Steel work welded in built up sections framed work, including cutting, fixing, lifting, hoisting and placing in position complete in gratings, frames, guard bars, ladder, railings, brackets, gates and similar works and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of GST, Toll Tax Sales tax or any other taxes imposed by the Government:- In gratings, framed guard bars, ladders, railing, brackets and similar works ceiling frames etcetra.
53	Providing and laying 40mm (forty millimeter) thick cement concrete flooring 1:2:4 (One cement isto two sand isto four graded stone. aggregate 20mm (Twenty millimetre) nominal size) laid one layer finished with a floating coat of neat cement. including preparation of surface grading complete and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
54	Providing and laying 10mm (Ten millimeter) thick acid proof/Alkali resistant tiles of Jonson/Somany/ Kajaria size 300x300mm (Three hundred into three hundred millimeter) of required shade in flooring laid over 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
55	Providing and laying 10mm (Ten millimeter) thick acid proof/Alkali resistant tiles of Jonson/Somany/ Kajaria size 300x300mm (Three hundred into three hundred millimeter) of required shade in skirting risers of steps and dados laid over 10mm (Ten millimeter) thick cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
56	Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in flooring laid on 20mm (Twenty millimetre) (average) thick cement mortar 1:4 (One cement isto four coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
57	Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
58	Providing and fixing Ist quality 300x450 mm (Three hundered into four hundered fifty millimetres) rectified Glazed Ceramic tiles of Kajaria/ Johnson /Orient & Bell/ AGL/ Somany/ Nitco conforming to sqm IS : 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in male and Femle toilet over 12mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
59	Providing and fixing Ist quality 300x600mm (Three hundered into six hundered millimetres) rectified Glazed Ceramic tiles of Kajaria/ Johnson / Orient & Bell/ AGL/ Somany/ Nitco conforming to sqm IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in male and Femle toilet wall tiles over 12mm (Twelve millimetre) thick bed of cement Mortar 1:3 (One cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
60	Providing and laying 300x300mm (Three hundred into three hundred millimetre) antiskid Ceramic Tiles of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in flooring laid over 20mm (Twenty millimeters) thick Cement mortar 1:4 (One cement isto four coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the Government.
61	Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo /Somany/Orient & Bell as per approved shade and design of the office Size of Tile 600x600mm sqm (Six hundred into six hundred millimetres) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in flooring, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
62	Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo /Somany/Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
63	Providing and laying Double Charge Vitrified tiles in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
64	Providing and laying Double Charge Vitrified tiles (Terrazo finish) in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, over 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
65	Providing and laying Double Charge Vitrified tiles (Terrazo finish) in different size of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x1200mm sqm (Six hundred into twelve hundred millimetres) (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dedo over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per suare metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
66	Providing and laying 400x400mm (Four hundred into four hundred millimeter) Precast labrador design (rainbow series) tiles of NTC/Unistone/ Atlantic with graded marble chips upto 12mm (Twelve millimetre), of approved shade in flooring/ treads of steps etcetera laid on a bed of 20mm (Twenty millimeter) thick cement mortar 1:4 (one cement isto four sand) and jointed with cement slurry as required up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate including Royality, Malkhana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
67	Providing and laying 18mm (Eighteen millimetre) thick Chima Pink / Grey Granite stone flooring in combonation with Lakha red granite/ Black Granite as per pattern and detail laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, Semi /Round Nosing, edging and moulding wherever required etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
68	Providing and Installing SPC wooden texture flooring of size as indicated in drawing fixed nail down with tongue and groove joint, with 5mm (Five millimetre) foom sheet including adhesive profilies, T.s skirting moulding beading at wall complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
69	Providing and laying (LVT Flooring) 5mm (Five millimetre) thick Luxury vinyl flooring over bare raised floor surface to proper level, line including joint treatment, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
70	Providing and laying Sports Vinyl Flooring over existing floor surface to proper level, line including joint treatment, complete as per approved Specifications & detail drawing & Architect's instruction. Low VOC Level Acrylic Based Adhesive as per the leed certification complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
71	Providing and Laying 8mm (Eight millimetre) thick Carpet Flooring of welspun or its equivalent weight not less than 3Kg (Three kilogram per square metre) with the help of adhesive of approved make over 2mm (Two millimetre) thick base foam including all fixing arrangement complete. Base rate of Carpet flooring complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
72	Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine / Reliance / Jindal Steel over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required as per specification, drawing and design and specifications.and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
73	Providing and fixing factory made ridges or hips having proper gola shape 60cm (Sixty millimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating of Tata / Sail / Reliance / Jindals steels i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete as per approved drawing, design and specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
74	Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine /Sail /Reliance /Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
75	Providing and fixing 12mm (Twelve millimetre) thick multipurpose plain Cement fiber board as per IS: 14276 (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
76	Providing and fixing false ceiling at all height 12.5 mm (Twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) (Board with BIS certification marks) including providing and fixing of frame work made of special sections, power pressed from M.S. sheet sand galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm (Twenty five millimetre) wide x1.6mm (One point six millimetre) thick with flanges of 27mm (Twenty seven millimetre) and 37mm (Thirty seven millimetre), at 1200mm (Twelve hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9mm running at the spacing of 1200mm (Twelve hundred millimetre) centre to centre, towhich the ceiling section 0.5mm (Zero point five millimetre) thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mmthick27mm high having flanges of 20 mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm (Four hundred fifty millimetre) centre,with 25mm (Twenty five millimetre) long dry wall screws @ 230mm (at the rate two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channelwith the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm (One hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
77	Providing and Fixing of Metal Galvanized Steel PLAIN metal ceiling System consisting of 600x600mm (Six hundred into six hundred millimetre) tiles of galvanized steel in 0.5mm (Zero point five millimetre) thickness inpowder coated Global White color of 60-80microns painted to aminimum of 120 gsm (both sides combined) galvanizing to be laid on grid systems with 15mm wide T-section flanges color white having rotary stitching on the Main Runner, 1200mm & 600mm (Twelve hundred millimetre and six hundred millimetre) Cross Tees. The tiles shall be inmodule size of 600x600/600x1200/300x1200mm, suitable for Green Building application, with Recycled content of 25%. The grid should be of 15mm wide T- section flanges color white having rotary stitching on all Tsections i.e. the Main Runner,1200mm & 600 mm Cross Tees with a web height of 38mm (Thirty eight millimetre) and a load carrying capacity of 15.43 Kgs/M. The T Sections havea Galvanizing of 90 grams per M2 having pull out strength of 100 Kgs. The Tile & Grid system used together should carry a 10 year warrantee. IINSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using GI angles of 25x25x0.5/0.6mm or M8 threaded rods at 1200mm (Twelve hundred millimetre) maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm (Four hundred fifty millimetre) from the adjacent wall. Flush fitting 1200mm (Twelve hundred millimetre) long cross tees to be interlocked between main runners at 600mm centre to form1200x600mm module (Twelve hundred into Six hundred millimetre).Cut cross tees longer than 600mm (Six hundred millimetre) require independent support. 600x600mm (Six hundred into Six hundred millimetre) module to befor medby fitting 600mm (Six hundred millimetre) long flush fitting cross tees centrally between the 1200mm (Twelve hundred millimetre)cross tees. The tile is engaged on the exposed grid system. Perimeter trimtobewall angles of size 3000x19x15mm, secured to walls at 450mm (Four hundred fifty millimetre) maximum centers. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
78	Providing and Fixing 4mm (Four millimetre) thick eco friendly light weight ACP Sheet false ceiling tiles of approved texture of size 600x600mm (Six hundred into six hundred millimetre) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising@ 120 grams per sqm including both side) consisting of main 'T runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minimum) sheet, spaced 1200mm (Twelve hundred millimetre) centre to centre, and cross \\"T\\" of size 24x28 mm made out of 0.33mm (Minimum) sheet, 1200mm (Twelve hundred millimetre) long spaced between main' T at 600mm (Six hundred millimetre) centre to centre to form a grid of 1200x600mm (Twelve hundred into six hundred millimetre) and secondary cross 'T' of length 600mm (Twelve hundred millimetre) and size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm (Twelve hundred into six hundred millimetre) panel to from grid of size 600x600mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size (24x24x3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm (Twenty five millimetre) long dry wall screws @ 230mm (at the rate of two hundred thirty millimetre) interval and laying 4mm (Four millimetre) thick densified edges ACP Sheet ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etcetra., wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5mm dia (Twelve point five millimetre) and 50mm (Fifty millimetre) long dash fasteners, 4mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8mm, spaced at 1200mm centre to centre along main 'T, bottom exposed with 24mm (Twenty four millimetre) of all T-sections shall be pre-painted with polyster baked paint, for all heights, complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
79	Providing, fabrication and fixing in position Plaster of Paris false ceiling (height will be decided on the spot as per site conditions) as per design (Plain/Curved/ Arch/ in slope) by fixing jali on frame work then Appling 13.5mm (Thirteen point five millimetre) average thick POP on Jali over frame work of GI sheet section. The main runners of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 0.60x0.60m (Zero point sixty into zero point sixty millimetre centre to centre). The POP must be Applied on jali fixed to the GI frame to get a smooth ceiling in line & level & finally finished with paint of approved make and shade complete. Rate inclusive of all material for POP False Ceiling, cutting of light opening, additional supports for light fixtures to hold the concealed light fixtures etcetra and as directed by the site engineer complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
80	Providing and fixing Heat Resistant Terrace Tiles (300x300x20mm) (Three hundred into three hundred into twenty millimetre) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20mm (Twenty millimetre) thick cement sand mortar in the ratio of 1:4 (One cement isto four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1 (One isto one) including rubbing and polishing of the surface upto 3 (three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner complete as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
81	Providing and applying 12mm (Twelve millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand), in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
82	12mm (Twelve millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand), on fair side including finished with a floating coat of neat cement upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
83	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
84	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on external side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
85	Providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
86	Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on moulding cornices or archi traves including neat finish to line upto all floor level complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax or any other taxes imposed by the Government.
87	6mm (Six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax or any other taxes imposed by the Government.
88	Providing and applying Plaster of Paris putty of average thickness 2mm, (Two millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
89	18mm (Eighteen millimetre) thick moulded Band straight/in Arech with cement mortar 1:4 (One cement isto four fine sand) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
90	Distempering (two or more coats) with oil bound distemper of approved brand and manufacture (Nerolac/Asian Berger/Dulux and of required shade on un-decorated wall surfaces to give an even shade over and including primer coat of whiting of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate including Octroi, GST, Sales tax, Toll tax or any other taxes imposed by the Government
91	Finishing walls with textured exterior emulsion of Asian/Dulux/Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 3.28 litre/ 10 Sqm (Three point twenty eight litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm (Two point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
92	Finishing walls with Acylic smooth exterior emulsion of Asian/Dulux/Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.67 litre/ 10 Sqm (One point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm (Two point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
93	Finishing walls with 100% (One hundred precent) Premium acuylic emulsion of Asian / Dulux / Berger /Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point ninety litre per ten square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
94	Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
95	Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
96	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per specification, drawing, design and direction by the Engineer in charge including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
97	Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
98	Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
99	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket with float glass panes of 5mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100	Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate with brass cover plate minimum 1.25 mm (One point two five millimetre) thickness etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
101	Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality upto 5mm (Five millimetre) depth and 5mm (Five millimetre) width complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
102	Providing and fixing Polyester powder coated minimum thickness 50 (Fifty) micron aluminium tubular handle bar 32mm (Thirty two millimetre) outer diametre, 3.0mm (Three point zero millimetre) thick & 2100mm (Twenty one hundred millimetre) long with SS screws etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
103	Providing and fixing Brass 100mm (One hundred millimetre) mortice latch and lock with 6 (Six) levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
104	Providing and fixing factory made uPVC white colour casement/casement fixed glazed windows of comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm (One point sixty plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100x8mm (One hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges 350x19x1.90mm (Three hundred firty into nineteen into one point nine millimetre) made of (big series) frame 67x60mm, sash 67x60 mm,(Sixty seven into sixty millimetre) sash 67x80mm (Sixty seven into eighty millimetre) and mullion 67x80mm (Sixty seven into eighty millimetre) all having wall thickness of 2.3 ± 0.2 mm (Two point three plus minus zero point two millimetre) and single glazing bead/double glazing bead of appropriate dimension including 8mm (Eight millimetre) thick tounghened glass including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105	Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone Note:-The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NABL accredited lab or by any other accreditation body which operates in accordance with ISO / IEC 17011 and accredits labs as per ISO/ IEC 17025. 1). Performance Laboratory Test for Air Leakage Test (50pa to- 300pa) & (+50pa to +300pa) as per ASTM E 283-04 testing method for a range of testing limit 1 to 200 mVhr Providing and supplying aluminium extruded tubular 2). Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml. 3).Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml 4). Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm 5). Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test, Tests to be conducted on site. 6). Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000 ml complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal placessealants, flashings, fire stop (barrier)-cum smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including (b) Providing and supplying aluminium extruded tubular Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. (c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant or required bite size in a clean and controlled factory / work shop environment, including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet 1mm (One millimetre) thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.(e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etcetra complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etcetra, enabling temporary structures and services, cranes or cradles etcetra as described above and as specified. The item includes the cost of getting all the structural and functional design Providing and supplying aluminium extruded tubular including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etcetra all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
106	Providing and fixing 12mm (Twelve millimetre) thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etcetera for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etcetera to be paid separately). complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
107	Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of (i) Ist course of applying cement slurry @ 4.4 kg/sqm (at the rate four point four kilogram per square metre) mixed with water proofing compound conforming to IS 2645 in recommended proportions rounding off junction of vertical and horizontal surface. (ii) 2nd (Second) course of 20mm (Twenty millimetre) cement plaster 1:3 (One cement isto three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) 3rd (Third) course of applying blown or residual bitumen applied hot at 1.7 kg. (One point seven kilogram) per square metre of area (iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). (One point seven kilogram per square metre) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
108	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etcetra consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm (Two point seven five kilogram per square metre) of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining wallsupto 300mm (Three hundred millimetre) height including cleaning the surface before treatment. nd laying integral cement based treatment (b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (One cement isto five coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm (Twenty millimetre) thick layer of cement mortar of mix 1:5 (One cement isto five coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge. (d) Finishing the surface with 20 mm (Twenty millimetre) thick jointless cement mortar of mix 1:4 (One cement isto four coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer- in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm (Three hundred into three hundred millimetre) square mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
109	Providing and fixing 24 (Twenty four) gauge x19mm (nineteen millimetre) size galvanized chicken wire mesh to junctions of concrete and masonary work and other locations where called for including cutting to required sizes side laps of minimum 75mm (Seventy five millimetre) and fixing in position with necessary clips and U shaped glavanised wire nail etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
110	Providing and fixing beveled edge mirror of superior glass of approved make (thickness of glass as per technical specifications) and fixed to wooden cleats/rawl plug with C.P. brass/SS Stud screws and washers etcetera all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
111	Providing & fixing natural River Bed Stone cladding on walls with 20mm (twenty millimetre) (average) thick base of cement mortar 1:4 (One cement isto four coarse sand) laid and pointing with cement sand mortar (1:2) (One cement isto two sand) including curing etcetera all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
112	Providing and fixing white vitreous china pedestal type water closet (European type)No 20087 (S-10) Size 57x 35x39cm (Fifty seven into thirty five into thirty nine millimetre) nominal size with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings and C.I. brackets, 40 mm (Forty millimetre) flush bend 20mm (Twenty millimetre) over flow pipe with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
113	Providing and fixing White Vitreous China Flat back single half stall urinal of size 580x380x350mm (Five hundered eighty into three hundered eighty into three hundred fifty millimetre) of Hindware/ Cera/ Jaquar with white PVC automatic flusing cisturn 5 Litre (Five) capacity including fitting, standard size CP brass flush pipe spreader and union and clamps (all in CP brass) including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114	Providing and fixing wash basin White Vitreous China wash basin size 550x 400mm (Five hundered fifty into four hundered millimetre) of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing /as per details with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 32mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
115	Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 510x1040 mm (Five hundered ten into Ten hundered forty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
116	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe 40mm (Forty millimetre) diameter complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
117	Providing and fixing 100mm (One hundred millimetres) diametre sand cast iron grating of Superior quality of Hindware/ Cera/ Jaquar for floor, gully or Nahni trap including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government..
118	Providing and fixing flat back 1200x1500mm (Twelve hundered into Fifteen hundered millimetres) beveled edge mirror of modi guard / Saint Gobain superior glass complete with 6mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
119	Providing and fixing 600x120x5mm (Six hundered into One hundered twenty into five millimetres) glass shelf of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Fofrty millimetre) long screws, rawl plugs etcetera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
120	Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
121	Providing and fixing trap of self cleansing design with screwed down or hinged dgrating with or without vent arm complete, including cost of cutting and making good the walls and floors 100mm (One hundred millimtre) inlet and 100 mm (One hundred millimtre) outlet Sand cast iron S & S as per IS: 3989 complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
122	Providing and fixing bottle trap 31mm (Thirty one millimetre) single piece moulded with height of 270mm, (Two hundred seventy millimetre) effective length of tail pipe 260mm (Two hundred sixty millimetre) from the centre of the waste coupling, 77mm (Seventy seven millimetre) breadth with 25mm (Twenty five millimetre) minimum water seal, weighing not less than 260 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
123	Providing and fixing PTMT liquid soap container 109mm (One hundred nine millimetre) wide, 125mm (One hundred twenty five millimetre) high and 112mm (One hundred twelve millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
124	Providing and fixing PTMT towel ring trapezoidal shape 215mm (Two hundred fifteen millimetre) long, 200mm (Two hundred millimetre) wide with minimum distances of 37mm (Thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
125	Providing and fixing 100mm (One hundred millimetre) diametre soil, waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
126	Providing and fixing 100mm (One hundred millimeter) diameters. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 door bend with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, GST, Toll tax or any other taxes imposed by the Government.
127	Providing and fixing plain bend of required degree 100mm (One hundred millimeter) diameters. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
128	Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm (Three millimetre) thick, bolts and nuts complete 100x100x100mm (One hundred into one hundred into one hundred millimeter) Sand cast iron S&S as per IS - 1729 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
129	Providing and fixing single equal plain junction of required degree 100x100x100mm (One hundred into one hundred into one hundred millimeter) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
130	Providing and fixing single unequal plain junction of required degree 100x100x75mm (One hundred into one hundred into seventy five millimeter) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
131	Providing and fixing terminal guard 100mm (One hundred millimetre) Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
132	Providing and fixing collar 100mm (One hundred millimetre) Sand cast iron S&S as per IS-1729 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
133	Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolategrey, or buff etcetera over a coat of primer (of approved quality) for new work 100mm (One hundred millimetre) diameter pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
134	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for Internal work-Exposed on wall 20mm (Twenty millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
135	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for Internal work-Exposed on wall 25mm (Twenty five millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
136	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for Internal work-Exposed on wall 32mm (Thirty two millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
137	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for Internal work-Exposed on wall 40mm (Forty millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
138	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints for Internal work-Exposed on wall 50mm (Fifty millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
139	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for Concealed work, including cutting chases and making good the walls etcetera 20mm (Twenty millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
140	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for Concealed work, including cutting chases and making good the walls etcetera 25mm (Twenty five millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
141	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m (One point zero zero metre) spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints for Concealed work, including cutting chases and making good the walls etcetera 32mm (Thirty two millimetre) nominal outer diametre Pipes complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
142	Providing and fixing 20mm (Twenty millimetre) nominal bore C.P. brass brass stop cock of standard design of Hindware/Cera/Jaquar including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
143	Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 25mm (Twenty five millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
144	Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 32mm (Thirty two millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
145	Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 40mm (Forty millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
146	Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 50mm (Fifty millimetre) diametre nominal bore complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
147	Providing and placing on terrace (at all floor levels polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
148	Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass bib cock of approved quality conforming to IS:8931 : complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
149	Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
150	Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar /Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
151	Providing and fixing 110mm (One hundered ten millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/ Relpipe (Reliance) /Vectus working pressure not less than 4/6 kg/cm2 (Four/Six kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
152	Providing and fixing 110mm (One hundered ten millimetre) Coupler on wall face unplasticised PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
153	Providing and fixing 110mm (One hundered ten millimetre) Bend 87.5° on wall face unplasticised PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
154	Providing and fixing G.I.pipes complete with G.I. fittings including trenching and refilling etcetra for External work 50mm (Fifty millimetre) diametre nominal bore complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
155	Providing and fixing G.I.pipes complete with G.I. fittings including trenching and refilling etcetra for External work 40mm (Forty millimetre) diametre nominal bore complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
156	Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm (Three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (Four point fifty kiligram) and frame to be not less than 2.70 kg (Two point seventy kilogram) as per standard design 150x100mm (One hundred fifty into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
157	Providing and laying 250mm (Two hundred fifty millimetre) diametre non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (One cement isto two fine sand) including testing of joints etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
158	Providing and laying 300mm (Three hundred millimetre) diametre non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (One cement isto two fine sand) including testing of joints etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
159	Constructing brick masonry manhole with FPS Non modular bricks (conforming to IS:4885) in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size), inside plastering 12mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cm (Ninety into eighty centimetres) and 45 cm (forty five centimetres) deep including C.I. cover with frame (medium duty) 455x610mm (Four hundred fifty five into six hundred ten millimetres) internal diameter, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
160	Constructing brick masonry manhole with FPS Non modular bricks (conforming to IS:4885) in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size), inside plastering 12mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90cm (One hundred twenty into Ninety centimetres) and 90cm (Ninety centimetres) deep including C.I. cover with frame (medium duty) 500mm (Five hundred millimetres) internal diameter, total weight of cover and frame to be not less than 116 kg (One hundred sixteen kilogramme) (weight of cover 58 kg (Fifty eight kilogramme) and weight of frame 58 kg (Fifty eight kilogramme) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
161	Costructing extra depth for brick masonary manhole having size 90x80cm (Ninety into eighty centimetres) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
162	Costructing extra depth for brick masonary manhole having size 120x90cm (One hundred twenty into Ninety centimetres) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
163	Providing orange colour safety foot rest of minimum 6mm (Six millimetre) thick plastic encapsulated as per IS : 10910, on 12mm (Twelve millimetre) dia steel bar conforming to IS: 1786, having minimum cross section as 23mmx25mm (Twenty three millimetre into twenty five millimetre) and over all minimum length 263mm (Two hundred sixty three millimetre) and width as 165mm (One hundred sisty five millimetre) with minimum 112mm (One hundred twelve millimetre) space between protruded legs having 2mm (Two millimetre) tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm (One hundred thirty eight millimetre) as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm (Thirty into twenty into fifteen centimetre) cement concrete block 1:3:6 (One cement is theee coarse sand isto six graded stone aggregate 20mm (Twenty milimetre) nominal size) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
164	Constructing brick masonry road gully chamber 50x45x60cm (Fifty into forty five into sixty centimetre) with bricks in cement mortar 1:4 (one cement isto four coarse sand) including 500x450mm (Five hundred into four hundred fifty millimetre) pre-cast R.C.C. horizontal grating with frame complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
165	Providing and Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundered fifty five into six hundered ten millimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)), R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five Fine sand isto three graded stone aggregate 20 mm (twenty millimetres) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundered fifty five into six hundered ten millimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five centimetres) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
166	Providing and Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 500x700 mm (Five hundered into seven hundered millimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)), R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five Fine sand isto three graded stone aggregate 20 mm (twenty millimetres) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 500x700 mm (Five hundered into seven hundered millimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five centimetres) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
167	Providing and Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 600x850 mm (Six hundered into eight hundered fifty millimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogramme) (weight of cover 23 kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme)), R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five Fine sand isto three graded stone aggregate 20 mm (twenty millimetres) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 600x850mm (Six hundered into eight hundered fifty millimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five centimetres) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
168	Constructing Extra depth for brick masonry Chamber beyond 45cm (Forty five centimetre) of brick masonry chamber size 455x610mm (Four hundered fifty five into six hundered ten millimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
169	Constructing Extra depth for brick masonry Chamber beyond 45cm (Forty five centimetre) of brick masonry chamber size 500x700mm (Five hundered into seven hundered millimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
170	Constructing Extra depth for brick masonry Chamber beyond 45cm (Forty five centimetre) of brick masonry chamber size 600x850mm (Six hundered into eight hundered fifty millimetres) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement motar 1:4 (One cement isto four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
171	Boring/drilling bore well of Rocky strata including Boulders 300mm (Three hundred millimetre) required diametre for casing/ strainer pipe, by suitable method prescribed in IS:2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log including hire & running charges of all equipments, tools, plants & machineries required for the job complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
172	Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etcetera all complete, 150mm (One hundred firty millimetre) nominal size diametre complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
173	Supplying, filling, spreading and leveling stone boulders of size range 5cm to 20cm, (Five centimetre to twenty centimetre) in recharge pit, in the required thickness all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
174	Supplying, filling, spreading and leveling gravels of size range 5mm to 10mm, (Five millimetre to ten millimetre) in the recharge pit, over the existing layer of boulders, in required thickness, all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
175	Supplying, filling, spreading and leveling coarse sand of size range 1.5mm to 2mm (One point five millimetre to two millimetre) in recharge pit, in required thickness over gravel layer, all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
176	Preparation and consolidation of sub grade with power road roller of 8 to 10 (Eight to ten) tonne capacity after excavating earth to an average of 22.5cm (Twenty two point five centimetre) depth, dressing to camber and consolidating with road roller including making good the undulations etcetera and re-rolling the sub grade and disposal of surplus earth with all leads and lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
177	Providing and laying design mix cement concrete of M-30 (M-Thirty) grade, in roads/ taxi tracks/ runways, using cement content not less than @ 340Kg/Cum (Three hundred forty kilogam) per cubic metre or as per design mix, using coarse sand and graded stone aggregate of 40mm (Forty millimetre) nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10mm widex50mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete prepared with batch mixing machine complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
178	Providing and fixing in position pre-moulded joint filler in expansion joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
179	Providing and laying in position bitumen hot sealing compound for expansion joints etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
180	Providing and applying 2.5mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/colour using hot thermoplastic material by fully/ semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
181	Providing, laying and making kerb channel 30cm (Thirty centimatre) wide and 50mm (Fifty millimetre) thick with cement concrete 1:3:6 (One cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) over 75mm (Seventy five millimetre) bed of dry brick ballast 40mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government..
182	Providing and laying at or near ground level factory made kerb stone of M-25 (M-Twenty five) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (One cement isto three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etcetera (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
183	Construction of 175mm (One hundred seventy five millimetre) thick granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, With material conforming to Grade-I of size range 75mm to 0.075 mm) (Seventy five millimetre to zero point seventy five millimetre) having CBR Value-30 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
184	Construction of 10cm (Ten centimetre) thick dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm, (Twenty five millimetre) aggregate cement ratio not to exceed 15:1,aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 (Ten) Mpa at 7 (Seven) days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 (Eight to ten) tonne vibratory roller, finishing and curing etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
185	Providing and laying factory made chamfered edge Cement Concrete paver blocks 60mm (Sixty millimetre) thick of M-35 (M-Thirty five) grade with approved colour, design of pattern of NTC Unistone/ Atlantic in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (Fifty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
186	Supplying, and laying at site 90mm to 45mm (Ninety millimetre to forty five millimetre) size stone aggregate for filteration tank including supply of all material T & P etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
187	Making soak pit 2.5m (Two point five metre) diameter 3.0m (Three point zero metre) deep with 45x45cm (Forty five into forty five centimetre) dry brick honey comb shaft with bricks and S.W. drain pipe 100mm (One hundred millimetre) diameter, 1.8 m (One point eight metre) long complete as per standard design. complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
188	Supplying and `Fixing of FRP Made garting above drain including labour material T & P complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
189	Providing and fixing 450mm (Five hundered millimetre) internal diamension in position Pre-cast R.C.C manhole cover with frame of square shape and approved quality LD 2.5 (Two point five) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
190	Providing and fixing 1.00 (One) horse power capacity water lifting pump ISI marked of Krloskar/ Crompton complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Govt. Senior Secondary School Dhaliara Tehsil Dehra District Kangra (Hp)Construction Of Civil Work, Sanitary Work & Sewerage Work, Road Work, Rain Water Harvesting Tank, Under, Dehra-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Rajiv Gandhi Govt. Model Day Boarding School At Govt. Senior Secondary School Dhaliara Tehsil Dehra District Kangra (Hp)Construction Of Civil Work, Sanitary Work & Sewerage Work, Road Work, Rain Water Harvesting Tank, Under, Dehra-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us