Tender For Repair To Hppwd New Rest House Building At Jeori In Tehsil R Ur Distt. Shimla H.P. (Sh:- Roofing Work In Polycarbonate Sheet, Painting, Water Tank Storage Structure Etc.), Shimla-Himachal Pradesh
TDR : 54387970
Tender Notice
BOQ
6 Days Left
Shimla
Himachal Pradesh
Tender For Repair To Hppwd New Rest House Building At Jeori In Tehsil R Ur Distt. Shimla H.P. (Sh:- Roofing Work In Polycarbonate Sheet, Painting, Water Tank Storage Structure Etc.)
Name of Work:- Repair to HPPWD New Rest House building at Jeori in Tehsil R ur Distt. Shimla H.P. (SH:- Roofing work in polycarbonate sheet, painting, water tank storage structure etc.)
Sl. No.
Item Description
1
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
Steel work rivetted in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint In beams joists,channels angles,tees,flats with connectiong plates or angle cleats as in main and cross beams hip and jack rafters purlins connected to common raffers and the like. through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
3
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
4
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) (in Walls) through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
6
Providing and fixing brass full way valve of approved make through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
7
Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
