|
| 1 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 2 | French spirit polishing One or more coats on old work through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 3 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and anufacture through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 4 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. completethrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 5 | Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. 75mm dia |
| 6 | 100mm dia |
| 7 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 8 | Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 9 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and anufacturethrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 10 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curvedsurfaces), excluding the cost of purlins, rafters andtrusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² Repair of roof of circuit housethrough all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 11 | Painting with oil type wood preservative of approved brand and manufacture New work (two or more coats through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 12 | French spirit polishing: Two or more coats on new works including coat of wood filler through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 13 | Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 25mm thick through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 14 | Marble work gang saw cut (polished and machine cut) of Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete :12 mm thick through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 15 | Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete.Kiln seasoned and chemically treated hollock wood through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 16 | Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 17 | Providing & fixing in position Phenol bonded Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 18 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 20 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 21 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, pre moulded and pre polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laidover 20mm thick base cement mortar 1:4 (1cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 24 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983withC.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 10x1040mmbowldepth225 through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 25 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Areaof opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled o rpanelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 26 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 27 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 28 | Providing and fixing 8mm dia C.P. /S.S. Jet with flexible tube upto 1metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 29 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 30 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 31 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 32 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 33 | Providing and fixing100 mm sand cast Iron grating for gully trap.through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 34 | Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 35 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : a) 125mm through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 36 | Providing and fixing ISI marked oxidised M.S. towerbolt black finish, (Barrel type) with necessary screws etc. complete : a) 150x10mm through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 37 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittingsand clamps, i/c cutting and making good the walls etc 15 mm dia nominal bore internal through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 39 | Providing and fixing G.I. Union in existing G.I .pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15 mm nominal bore through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 40 | Providing and fixing Polyethelene-Aluminium PolyethelenePE-AL- PE Composite Pressure Pipes conforming to IS- 15450, U.V.stabilized with carbon black having thermal stability for hot&cold water supply, capable to withstand temperature upto 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required)e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing.This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. 1216 (16 mm OD) pipe through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. Please Enable Macros to View BoQ information |
