|
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Cement concrete 1:4:8 with stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 3 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth |
| 4 | Damp proof course 7.5 Cm thick cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 5 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 6 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 7 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 8 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc |
| 9 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level |
| 10 | 20mm thick cement plaster 1:4 on walls |
| 11 | 12.5 mm thick cement plaster 1:4 |
| 12 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 13 | Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Udaipur Green Marble Tiles of thickness 18mm to 20mm with Slabs sizes above 0.50 sqm |
| 14 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 15 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete |
| 16 | Providing and fixing polycarbonate sheet sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation metre. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, and the joints shall be provided with aluminium strips at top and bottom as a seal complete excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 17 | Providing and fixing aluminum frame work for PVC Panneling ceiling work with extruded built up standard and other sections make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners all complete as per architectural drawings |
| 18 | Providing and fixing PVC Ceiling heavy quality fixed on Aluminium frame (Frame work extra) Complete in all respects |
| 19 | Providing and fixing flexible insulation sheet Ceiling heavy quality fixed on shed frame to resist heat Complete in all respects |
| 20 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 21 | Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work |
| 22 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 23 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/ 10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm Please Enable Macros to View BoQ information |
