|
| 1 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 2 | One light point, fan point,bell point controlled by one, one way switch 5 Amps |
| 3 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 4 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 5 | Description all as per item No 1 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 6/16 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 6 | Description all as per item No 1 here in before but using 4 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 15/20 amps switch socket cobmination point including necessary running of 4 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 7 | S&F modular switch 1 way 6 A , 1 module complete all as specified and directed. |
| 8 | S/F switch modular type 16 A, 1 module complete all as specified and directed. |
| 9 | S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed. |
| 10 | S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 11 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm for P and N and one run of earth 6 sqmm and one run of PVC conduit will be measured as one unit length |
| 12 | Description all as per item No. 8 here in before but using 4.0 sq mm cable Note:- Two runs of 4 sqmm for P and N and one run of earth 4 sqmm and one run of PVC conduit will be measured as one unit length |
| 13 | S & F for Highly efficient LED Inverter Bulbs, 9 watts in B-22 cap complete all as specified and directed. Make :- Cat Part No 85395200 of Havells or equivalent make as mentioned in approved list of makes. |
| 14 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 15 | Supply and fixing Inverter LED batten 20 Watt 6500 K with squre profile and polycarbonate channel . Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make :Havells LHEXACP7FN1W020 or equivalent make as mentioned in approved list of makes. |
| 16 | S & F for Decorative wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base and including fixing of LED bulb 7 watts complete all as specified and as directed. Make Havells Cat No LHFOAJE1TZ1I060 or equivalent make as mentioned in approved list of makes. |
| 17 | M&L for wall fans 450 mm sweep, 230 volts, 50 Hz complete with mounting brackets all as specified and directed V3 Wall Silver Black . Make :- Havells cat part No FHWV3TFSLB18 or equivalent make as mentioned in approved list of makes. |
| 18 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35/40 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-chargeMake :- Havells Cat Part No ENDURASUNDOWNSL30WLED757PASYBOPC or Bajaj Cat part No ENXT P 30L WH CR PC SD or equivalent make as mentioned in approved list of makes. |
| 19 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 20 | Supply and Fix flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for 100-125 amps MCCB as incomer and SPN/TP MCBs as out going, 4 way (Optium 1+12 Module) including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fix MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fix MCB SP 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for single pole and neutral encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz double door with magnitic locking system including necessary provision for inserting the AC box in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete with one single pole MCB SP 20 Amps complete all as specified and directed. |
| 24 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 25 | Supply and fix MCB TPN 40 to 63 amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for ceiling rose 3 phase/PVC polycarbonate isolated body complete all as specified and directed |
| 27 | Supply and fix and testing for anti suicide fan rod 12 inch if the load on fan exceeds 22 kg , than the smart rod / pice opens from its centere and spring in the pipe expands and including all the connected items lfan hook, clamps, nuts bolts , clips. Thus any one trying to hang from fan comes down safely icluding taking down the celing fan and refixing the same and old fan down road deposit to AGE E/M store complete all as specified and directed. |
| 28 | S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 29 | M & L Earthing complete for sub station equipments with galvanized steel earth pole electrod of size 600x600x6.3mm thick burried directly in the ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of plate not less than 1.5 metre below the ground level, connected to galvanised iron strip 25 x 4 mm by means of nuts, bolts,check nuts and washers of galvanised or steel all as specified or shown in electrical plate No. 3 of SSR-2009( Part-l), including ncessary earth work and excavation in any strata, GI pipe 40mm dia light grade for protection of galvanised iron earthing strip upto 7.5 mtrs, including concrete chamber of PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) having copping in PCC (1:3:6) Type C-1using 20mm graded stonr aggregate. Intemal surface of concrete chamber shall be plastered with 12mm thick cement mortar (1;4) and 50mm thick RCC cover in proportion (1:2:4) type B-1using 20mm graded stone aggregate, reinforced with 8mm dia tor bar@ 80mm c/c both ways and charcoale dust common salt etc.,funnel testing point, 8 mesh per liner inch, including test point , testing, complete . |
| 30 | Supply & Fixing of 16 M High Mast shaft in two sections suitable for 44 m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 09 nos luminaries in symmetrical arrangement, double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are included and are a part of contract). The following accessories are as under :-MAKE : Cat part No BHMRL16A of BAJAJ or equivalent make as mentioned in approved list of makes. |
| 31 | (a) Foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template.(b) LED flood light type BJFL 200W LED - 08 Nos(c) LED type single dome aviation obstruction light - 01 Nos(d) Outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 22A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.(e) Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. (f) Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour.(g) GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2 nos per mast required).(h) Installation of the mast feeder pillar by grouting the stand in concrete.(i) The contractor submit the High Mash pole drawing from the manufacturer before exection of the work |
| 32 | M&L of 9 mtr high hot dip galvanised octagonal pole with 155 mm bottom A/F and 70mm top A/F made up of 3 mm thk. HT sheet alongwith base plate of size 250x250x12 mm thickness PCD -200mm and 4 nos of M24X750mm long J type EN 8 grade foundation bolts along with template including 1.5 meter long hot dip galvanised single arm bracket made up of 40nb dia GI pipe suitable to mount on pole having top 70mmA/F, all as specified and directed. (Note : Excavation and PCC will be measured and paid separately under respective items). |
| 33 | M&L of 9 mtr high hot dip galvanised octagonal pole with 155 mm bottom A/F and 70mm top A/F made up of 3 mm thk. HT sheet alongwith base plate of size 250x250x12 mmthickness PCD -200mm and 4 nos of M24X750mm long J type EN 8 grade foundation bolts along with template including 1.5 meter long hot dip galvanised double arm bracket made up of 40nb dia GI pipe suitable to mount on pole having top 70mmA/F, all as specified and directed.(Note : Excavation and PCC will be measured and paid separately under respective items). |
| 34 | Fabricate, Supply install test and commissioning of Feeder pillar box (Out door type) of size cm x 60 cm x 50 cm x 40 cm (H x W x D) suitable for 440 Volt, 3 phase & Neutral , 50Hz supply, floor mounted weather and vermin proof fabricated from MS angle of size 50x50x5 mm as base frame,with 2.5 mm thick CRCA sheet with gland plates at bottom with suitable Brass chromium plated glands, with locking arrangements complete, duly powder coated with siemens grey colour after chemical treatment, including with suitable size aluminium bus bars 250 Amps 04 Nos in its full width (60 cm length) to be fixed on suitable size of insulators. The bus bar having 08 Nos of holes including provision of suitable size of nuts and bolts of all four bus bars, the feeder pillar box shall be floor mouted with provision of four nos of legs made out out 50 x 50 x 5 mm MS angle not less than 40 cm and provision of 01 No. MCCB 63 to 100 Amps, 4 Pole, 25 KA, Fixed thermal and magnetic relase type, the panel shall be grouted under PCC 1:2:4 complete all as specified and directed. |
| 35 | Supply & Laying XLPE insulated, armoured, electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles / walls or passing through pipes including provision of necessary lugs and glands & making necessary connection complete all as specified and directed, of the following size:- |
| 36 | 10 sqmm 4 core |
| 37 | 25 Sqmm 3.5 core |
| 38 | 50 Sqmm 3.5 core |
| 39 | Excavation in trenches in soft/ loose soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable / fixing poles, stays etc and getting out complete all as specified and directed |
| 40 | Excavation in trenches in Hard/dense soil and not exc 1.5 m wide and n.exc 1.5 m in depth for laying of cable / fixing poles, stays etc and getting out complete all as specified and directed |
| 41 | Returning , filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick with excavated soil complete all as specified and directed. |
| 42 | Removing excavated material (surplus soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed. |
| 43 | M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench , under and over cable complete all as specified and as directed.Note : Punned thickness (18cm) of sand shall be measured for payment |
| 44 | M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed. |
| 45 | S&F GI tubing, light grade, 40 mm bore pipe laid in trenches/duct or in road crossing or fixed to wall/poles for protection of cable complete all as specified and direct. |
| 46 | S&F GI tubing, light grade, 50 mm bore pipe laid in trenches/duct or in road crossing or fixed to wall/poles for protection of cable complete all as specified and direct. |
| 47 | Supply, fixing, testing and commissioning in energy saving long life LED Street light fitting pressure die cast aluminium housing (LM6 alloy) minimum 8500/9500 lumens with maximum system wattage 90 watt LED inbuilt potted Driver, CCT5700, CRI>70,PF>0.95, 4KV surge protection (inbuilt) and operating voltage of 140-270 VAC. pressure die cast epoxy power coated aluminum housing with efficient designed heat shrink with heat resistant toughened glass with frame fixed with SS Screws suitable for fixing ther street light pole and including nut bolt as per site requirement complete with ingress protection IP- 66 CC temperature 5700K total harmonic distortion THD is ≤ 10% complete all as specified and directed by Engr-in-Charge. Make :- Bajaj Cat Part No- BRLEP 90W LED V2 / CROMPTON Cat Part No LSTP-90-CDL-M (Model-NEXUS NEO) / Wipro cat part No-LR02-102-XXX-57-G2 or equivalent make as mentioned in approved list of makes. |
| 48 | M&L for Wiring with 1.5 sq mm 2 runs of single core multistrand PVC insulated, unsheathed cable conforming to IS - 694, 1100 volts with copper conductor etc as required and connecting to board to fitting as specified and directed by Engr-in-Charge. |
| 49 | M&L for providing under ground cable route indicating slab of size 60cm length, 30cm width, and 10cm thick, casted in PCC 1:3:6 and words \\"MES UG LT CABLE \\" engraved on both side including arrow mark towards end point and slab grovoted in ground 30cm deep in PCC 1:4:8 all as specified and directed by engr-in-charge at site. |
| 50 | M&L for PCC 1:4:8, type D2 ( using 40 mm graded crushed stone aggregate) as in base the pole, all as specified and directed. |
| 51 | M&L for PCC 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in foundation for poles, all as directed and as specified. |
| 52 | M&L for PCC 1:2:4, type B1 ( using 20 mm graded crushed stone aggregate) as in base,coping of the pole, all as specified and directed. |
| 53 | Supply and fix Post Top Lantern 25 watts fully aluminium cast body finished with polyurethane paint(with prior treatment) with acrylic window cover including LED wharm white bulb 9/12 Watt .Total length 635 mm and Max breadth 323mm, heritage look ,spigot entry 78mm as per IS 10322 complete incl altration in mounting by welding/threading/placing addl GI socket to place lantern truely vertical in position all as specified and as directedMake :- Model No PTLD-003 of Make Mepro electricals or equivalent make as mentioned in approved list of makes. |
| 54 | M&L for fixing GI pipe 65 mm dia medium grade of suitable length as directed at site and making standing pole for post top lantern in existing RCC pillar with necessary breaking of RCC pillar top ,cutting Existing GI Pipe 50 mm size , welding with 65 mm GI pipe including fixing FRP looping box at bottom of pillar ,casting of PCC , making good disturbed surface with PCC, cementing, Plastering incl painting all as specified and directed .Note: PCC ,GI pipe 65mm, Necessary excavation and FRP loopng box will be measured and paid seperrately as per relevent item in schedule. |
| 55 | M&L for GI pipe 63 to 65 mm dia medium grade for fixing post top lantern all as specified and directed . |
| 56 | Supply and fix Architectural designed aluminium cast extra heavy duty pole mounted post top lantern incl heavy duty leg and broader designer base finished with polyurethane paint (with prior treatments) Diameter of pole leg is approx 76mm. Outer dia for spigot entry 60 mm 03 Nos T shaped bolts with nuts and washers provided for concrete foundation Including 01 No Post top lantern Model No PTL003 and 02 Nos post top lantern model PTL03 along with squre junction made out of aluminium finished with max projection breadth of 880 mm suitable for three Nos post top lantern including LED wharm white bulb 15/18 Watt complete all as specifed and as directed.Make :- Model No of Pole : MCPL 02 and Model no of squrae junction is CDPB04 of Mepro electricals or equivalenet in Crompton/ Wipro/Philips/Havells/Bajaj as approved by GE. |
| 57 | S&F LED Bollard garden lights fittings, made out of Cast Aluminum body finished with Polyurethane Paint (With Prior Treatments) with acrylic window cover.B-22 porcelain holder provided with aluminum cover. As Per: IS 10322 PART-5 SECTION-1 LATEST 2017.the total length 914 mm (36 Inches). Base diameter 231 mm (9.1 inches). Breadth of bollard is160 MM (6.3 inches).Clear acrylic diffuser having 7 duly stack lowers suitable for LED bulb and provosion of LED bulb whrm white 18 watts complete all as specified and as directed. Make :- Mepro CAT NO. CAT NO. MBL-BR-23 or equivalent make as mentioned in approved list of makes. |
| 58 | Cutting existing road surfaces or hard standing 0.45 mtr depth and 0.3 mtr width (22 CM thick comprising bituminous topping) for laying of pipes/cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Rate quoted by the contractor deemed to be inclusive of PCC 1:2:4 to be required to making good the disturbed surface to match with existing complete all as specified and directed. |
| 59 | M & L boring of holes under road pavment hard standing by trenchless technology using ultra sound technique and necessary machine incl HDPE pipe of 100mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by Engr-in-charge. |
| 60 | M & L for taking down and refixing the same as per existing surfce of inerlocking block/tile to making good the disturbed surface to match with existing, the width not more than 0.45 mtr complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
