|
| 1 | Earthwork in excavation by mechanical means (Hydraulicexcavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressingcomplete. |
| 4 | .Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemicalemulsion @ one litre per hole, 300 mm apart includingdrilling 12 mm diameter holes and plugging with cementmortar 1 :2 (1 cement : 2 Coarse sand) to match the existingfloor: |
| 5 | With Chlorpyriphos/Lindane E.C. 20% with 1%concentration |
| 6 | CONTRETE WORK |
| 7 | CEMENT CONCRETE (CAST IN SITU) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived fromnatural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 9 | DAMP-PROOF COURSE |
| 10 | Providing and laying damp-proof course 50mm thick withcement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate20mm nominal size derived from natural sources). |
| 11 | REINFORCED CEMENT CONCRETE |
| 12 | CAST IN SITU |
| 13 | Providing and laying in position specified grade of reinforcedcement concrete, excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 14 | Reinforced cement concrete work in walls (anythickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 15 | Reinforced cement concrete work in beams, suspendedfloors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircasesand spiral stair cases above plinth level up to floor five level,excluding the cost of centering, shuttering, finishing andreinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources). |
| 16 | FORM WORK |
| 17 | Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns, etc. for massconcrete |
| 18 | Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc. |
| 19 | Suspended floors, roofs, landings, balconies and accessplatform |
| 20 | Lintels, beams, plinth beams, girders, bressumers andcantilevers |
| 21 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 22 | REINFORCEMENT |
| 23 | Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 24 | Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. (ii)Super Ductile (SD) TMT reinforcement bars |
| 25 | MASONARY WORK |
| 26 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 27 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 28 | CLADDING WORK |
| 29 | Providing and fixing Ist quality ceramic glazed wall tilesconforming to IS: 15622 (thickness to be specified by themanufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approvedby Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | WOOD AND P.V.C. WORK |
| 31 | Providing and fixing ISI marked flush door shuttersconforming to IS : 2202 (Part I) decorative type, core ofblock board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 32 | Steel Work |
| 33 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means,including M.S. pressed butt hinges 2.5 mm thick with mortarguards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile CFixing with adjustable lugs with split end tail toeach jamb |
| 34 | Steel work in built up tubular (round, square or rectangularhollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approvedsteel primer, including welding and bolted with specialshaped washers etc. complete.Hot finished welded type tubes |
| 35 | Providing and fixing hand rail of approved size by weldingetc. to steel ladder railing, balcony railing, staircase railingand similar works, including applying priming coat of approved steel primer.MS Tube |
| 36 | FLOORING |
| 37 | Brick SoilingBrick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the jointswith same mortar, with common burnt clay non modularbricks:1:6 (1cement : 6 coarse sand) |
| 38 | TERRAZO FLOORING |
| 39 | 40 mm thick marble chips flooring rubbed and polished togranolithic finish, under layer 34 mm thick cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate12.5 mm nominal size) and top layer 6mm thick with white,black, chocolate, grey, yellow or green marble chips of sizesfrom 1 mm to 4 mm nominal size, laid in cement marblepowder mix 3:1 (3 cement : 1 marble powder) by weight inproportion of 4:7 (4 cement marble powder mix : 7 marblechips) by volume, including cement slurry etc. complete :Ordinary cement without any pigment |
| 40 | ROOFING |
| 41 | SHEET ROOFINGProviding corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, boltsand nuts 8 mm diameter with bitumen and G.I. limpetwashers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² |
| 42 | FINISHING |
| 43 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 44 | Providing and applying plaster of paris putty of 2 mmthickness over plastered surface to prepare the surface even and smooth complete |
| 45 | EXTERIOR FINISHING |
| 46 | Finishing with Deluxe Multi surface paint system forinteriors and exteriors using Primer as per manufacturersspecifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm overand including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 47 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work |
| 48 | ALUMINIUM WORK |
| 49 | Providing and fixing aluminium work for doors, windows,ventilators and partitions with extruded built up standardtubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixingwith dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling,C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed torequired shade according to IS: 1868, Minimum anodiccoating of grade AC 15) |
| 50 | Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge . (Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not lessthan 12.50 kg/sqm) |
| 51 | DISMANTLING AND DEMOLISHING |
| 52 | Demolishing R.C.C. work manually/ by mechanical meansincluding stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 53 | Demolishing brick work manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 54 | Extra for dismantling trusses, rafters, purlins etc. of woodwork for every additional span of one metre or part thereofbeyond 10 metres :Of sectional area 40 square centimetres and above |
| 55 | TOILET BLOCK (ADDITIONAL HARDWARES |
| 56 | Supply and installation of SS aldrop of approved make anddesign complete with necessary screws , nuts etc |
| 57 | Supply and installation of 8\\" Brass tower bolt of approvedmake and design |
| 58 | Brass butt hinges (heavy type) :75x65x4.0 mm (weighing notless than 0.20 kg) |
| 59 | Brass handles 125 mm with plate 175x32 mm |
| 60 | Brass screws 25 mm |
| 61 | Brass screws 20 mm |
| 62 | TOILET BLOCK (ELECTRICAL ITEMS) |
| 63 | Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed steel conduit, withpiano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable etc. as required.Group C |
| 64 | Wiring for circuit/ submain wiring along with earth wire withthe following sizes of FRLS PVC insulated copperconductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 65 | Supplying and fixing of following sizes of medium classPVC conduit along with accessories in surface/recessincluding cutting the wall and making good the same in case of recessed conduit as required. |
| 66 | Installation ,Testing, Commissioning of wall bracket /ceilingfittings of all sizes and shapes containing upto twoGLS/CFL/LED lamps per fitting, complete with allaccessories including connections etc. as required. |
| 67 | Supplying, Testing and commissioning of 20 watt LEDbatten of approved brand and make |
| 68 | Installation of exhaust fan in the existing opening, includingmaking good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 69 | Supplying of exhaust fan(300mm) of approved brand andmake |
| 70 | Supplying and fixing suitable size GI box with modular plateand cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 71 | Supplying, fixing , testing and commissioning of single poleand neutral, sheet steel, MCB distribution board, 240 V, onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But withoutMCB/RCCB/Isolator) 16 way, Double door |
| 72 | TOILET BLOCK (PLUMBING) |
| 73 | Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litrelow level white P.V.C. flushing cistern, including flush pipe,with manually controlled device (handle lever), conformingto IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors whereverrequired :W.C. pan with ISI marked white solid plastic seat and lid |
| 74 | Providing and fixing wash basin with C.I. brackets, 15 mmC.P. brass pillar taps, 32 mm C.P. brass waste of standardpattern, including painting of fittings and brackets, cuttingand making good the walls wherever require: White VitreousChina Wash basin size 630x450 mm with a single 15 mmC.P. brass pillar tap . Make Jaquar, hindware or equivalent |
| 75 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexibletube upto 1 metre long with S.S. triangular plate to Europeantype W.C. of quality and make as approved by Engineer - in -charge. Make Jaquar, hindware or equivalent |
| 76 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete. Flexible pipe40 mm dia |
| 77 | Providing and fixing soil, waste and vent pipes : 100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coatedinside & outside IS:15905 |
| 78 | Providing and fixing white vitreous china flat back or wallcorner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushingcistern |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixingthe pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making goodthe walls etc.20 mm nominal dia Pipe |
| 80 | Providing and fixing brass bib cock of approved quality : 15mm nominal bore of approved make and design |
| 81 | Supplying, Installation, Testing and commissioning of floortrap made of SS 304 of approved brand and make |
| 82 | Supplying, Installation, Testing and commissioning of 1000lloft tank of approved brand and make |
| 83 | Septic Tank |
| 84 | Earth WorkEarthwork in excavation by mechanical means (Hydraulicexcavator) /manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 85 | CEMENT CONCRETE (CAST IN SITU) |
| 86 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) includingmanufactured sand derived from Recycled ConcreteAggregate (RCA) upto 25% : 3 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) upto25%). |
| 87 | Providing and laying in position specified grade of reinforcedcement concrete, excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 88 | Steel ReinforcementSteel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 89 | MASONARY WORKBrick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 90 | FlooringBrick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the jointswith same mortar, with common burnt clay non modularbricks:1:6 (1cement : 6 coarse sand) |
| 91 | FINISHING12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 92 | Providing and fixing in position pre-cast R.C.C. manholecover and frame of required shape and approved quality: MD10 : Square shape 450 mm internal dimension |
| 93 | MAIN BUILDING (civil work) |
| 94 | EARTH WORKEarthwork in excavation by mechanical means (Hydraulicexcavator) /manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50 m.Earthwork in excavation by mechanical means (Hydraulicexcavator) /manual means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan), includingdressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal ofsurplus excavated soil as directed, within a lead of 50 m. |
| 95 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressingcomplete. |
| 96 | Diluting and injecting chemical emulsion for POSTCONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemicalemulsion @ one litre per hole, 300 mm apart includingdrilling 12 mm diameter holes and plugging with cementmortar 1 :2 (1 cement : 2 Coarse sand) to match the existingfloor:With Chlorpyriphos/Lindane E.C. 20% with 1%concentration |
| 97 | REINFORCED CEMENT CONCRETECAST IN SITUProviding and laying in position specified grade ofreinforced cement concrete, excluding the cost of centering,shuttering, finishing and reinforcement - All work up toplinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 98 | Reinforced cement concrete work in walls (anythickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 99 | FORM WORKCentering and shuttering including strutting, propping etc.and removal of form forFoundations, footings, bases of columns, etc. for massconcrete |
| 100 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 101 | REINFORCEMENTSteel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 102 | Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. (ii)Super Ductile (SD) TMT reinforcement bars |
| 103 | MASONARY WORKBrick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 104 | Providing and fixing specified wood frame work consistingof battens 50x25mm fixed with rawl plug and drillingnecessary holes for rawl plug etc. including priming coatcomplete.Kiln seasoned and chemically treated hollock wood |
| 105 | WOOD AND P.V.C. WORKProviding and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws :30 mm thick shutterswith ISI marked M.S. pressed butt hinges bright finished ofrequired sizeKiln seasoned and chemically treated hollock wood |
| 106 | FINISHING12 mm cement plaster of mix : |
| 107 | Providing and applying plaster of paris putty of 2 mmthickness over plastered surface to prepare the surface even and smooth complete. |
| 108 | EXTERIOR FINISHINGFinishing with Deluxe Multi surface paint system forinteriors and exteriors using Primer as per manufacturersspecifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm overand including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 109 | Painting with synthetic enamel paint of approved brandandmanufacture of required colour to give an even shade :Two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacture |
| 110 | Painting on G.S. sheet with synthetic enamel paint ofapproved brand and manufacture of required colour to givean even shade :New work (two or more coats) including a coat of approvedsteel primer but excluding a coat of mordant solution |
| 111 | NEW TECHNOLOGIES AND MATERIALSProviding and fixing at all height false ceiling of 4mm thickphenol bonded Bamboo Mat board (595x595mm)conforming to IS:13958- 1994 including providing andfixing of frame work made of GI angle 25x25x0.4 mm thickall around suitably fixed to wall with the help of dashfastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member)connected to ceiling with 2.64mm GI wire and anchorfastener at every junction and also including cost of makingopenings for light fittings, grills, diffusers, cut outs madewith frame of perimeter channels suitably fixed all completeas per direction of Engineer-in-charge. |
| 112 | Providing and Laying of Stamped Concrete including cost ofcentering and finishing. |
| 113 | Lifting of the Museum Building of total area= 1700 Sq.ft(Total Height for lifting-3 ft) |
| 114 | EARTHWORKTrenching in ordinary soil up to a depth of 60 cm includingremoval and stacking of serviceable materials and thendisposing of surplus soil, by spreading and neatly levellingwithin a lead of 50 m and making up the trenched area toproper levels by filling with earth or earth mixed with sludgeor / and manure before and after flooding trench with water(excluding cost of imported earth, sludge or manure). |
| 115 | Supplying and stacking of good earth at site including royaltyand carriage upto 5 km lead complete (earth measured instacks will be reduced by 20% for payment). |
| 116 | Supplying and stacking of good earth at site including royaltyand carriage upto 5 km lead complete (earth measured instacks will be reduced by 20% for payment). |
| 117 | GRASSSupplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in greenincluding loading, unloading, carriage and all taxes paidetc.and as per direction of officer in charge. |
| 118 | Footing fot signageProviding and laying in position cement concrete of specifiedgrade excluding the cost of centering and shuttering - Allwork up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived fromnatural sources : 6 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 119 | Making plinth protection 50mm thick of cement concrete1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 120 | MASONARY WORKBrick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 121 | FLOORINGBrick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the jointswith same mortar, with common burnt clay non modularbricks:1:6 (1cement : 6 coarse sand) |
| 122 | For pedestalProviding and laying Vitrified tiles in different sizes(thickness to be specified by the manufacturer), with waterabsorption less than 0.08% and conforming to IS: 15622, ofapproved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 1000x1000 mm |
| 123 | FINISHING : 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 124 | DISMANTLING AND DEMOLISHINGDemolishing brick work manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 125 | ROAD WORK : SUB-GRADEPreparation and consolidation of sub grade with power roadroller of 8 to 12 tonne capacity after excavating earth to anaverage of 22.5 cm depth, dressing to camber andconsolidating with road roller including making good theundulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. |
| 126 | Providing and laying factory made chamfered edge CementConcrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade withapproved colour, design & pattern. |
| 127 | CEMENT TILESPrecast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement |
| 128 | Supplying and Installation of Fibre cement boards thickness25 mm approved brand and make |
| 129 | Supplying, Installation, Testing and commissioning of MildSteel Rectangular nonlit Retro Reflective Sign Board ofapproved brand and make |
| 130 | Supplying, Installation, Testing and commissioning of MildSteel Rectangular nonlit Retro Reflective Sign Board ofapproved brand and make |
| 131 | Supplying, Installation, Testing and commissioning of 25Watt White LED of approved brand and make |
| 132 | PLANT NAMESPreparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 133 | Filling mixture of earth and sludge or manure in the desiredproportion in trenches, flooding with water and levelling (cost of supplying earth and sludge or manure and mixingexcluded). |
| 134 | Filling mixture of earth and sludge or manure in the desiredproportion in trenches, flooding with water and levelling (cost of supplying earth and sludge or manure and mixingexcluded). |
| 135 | Providing and stacking of Plumeria alba dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPEbags as per direction of the officer-in-charge |
| 136 | Providing and stacking of Azadirachta indica ( Neem ) ofheight 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 137 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge |
| 138 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-chargeProviding and stacking of Foxtail palm of ht. 180-210 cmbottom girth 25-30 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 139 | Providing and displaying of Dracaena mahatma having ht. 30 cm to 45 cm, well developed, fresh and healthy foliage in 20 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge |
| 140 | Providing and displaying of Dracaena pendanus, welldeveloped, having 6 to 8 suckers with healthy foliage in 25cm size Earthen pot/Plastic pot & as per direction of theofficer-in-charge |
| 141 | Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. s per direction of the officer-in-char |
| 142 | Providing and stacking of Bauhinia tomentosa (yellow) ofheight 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 143 | FURNITURE AND LIGHTINGSupplying and Installation of good quality cast iron powdercoating garden bench 2 seater of approved brand and make |
| 144 | Supplying, Installation, Testing and commissioning of 10 watt LED bollard light of approved brand and make |
| 145 | Contingencies |
| 146 | Any other item(s) not included above as may benecessary to complete the work with clear instructionin writing from the Tender Inviting Authorityamounting not more than 5% , which in included in theTender value (inclusive of all applicable taxes).* Please Enable Macros to View BoQ information |
