|
| 1 | S & F 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid flush SKELTON door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws incl taking down shutter exe 1.0 Sqm but not ex 2.0 Sq.m each all as per direction of Engineer- In- Charge. |
| 2 | S&F 30mm thick molded WPC wire mesh factory made 1005 decorative type, moulded, panel door shutter ( water proof, termite proof, termite proof, fire retardent) prepare to receive Mesh, gauze etc (single or two panel Including wire mesh(confirming as per IS: 4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/cum manufactured by an ISO : 9001-2015 certified company and fixing shutter with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws incl taking down shutter exe 1.0 Sqm but not ex 2.0 Sq.m each all as per direction of Engineer- In- Charge. |
| 3 | S & F 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed. |
| 4 | S & F 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed. |
| 5 | S & F Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed. |
| 6 | M&L for providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet .3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides including Dismantling Wall and ceiling boards any thickness, including cover fillets incl making good all the disturbed portion complete all as specified and directed. |
| 7 | S&F in repair for stainless steel, 25 mm dia and 1.2 mm thick curtain rod with and including fixing SS brackets and decorative type brass knobs both side of each rod, complete all as specified and directed.Note : Measurement will be taken between end points of Knobs |
| 8 | M&L for glazed ceramic coloured tiles(Matte/Gloss Finish) of size not less than 450x300x7 mm thick as on vertical surfaces such as wall set and jointed in neat cement slurry and pointed with coloured cement to match over 15 mm thick backing coat on fair faces of brick work in CM 1:4 incl dismantling of wall tiling and removing rubbish off premises complete all as specified and as directed. Note: Pattern/Texture and Finish of wall Tile is selected by Engr-in - charge. |
| 9 | M&L for joint free non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exec. 0.09 sqm but not exec. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed or bedding layer in CM 1: 6 incl dismantling of floor tiling incl cement mortar bedding and removing rubbish off premises complete all as specified and as directed. Note : 1.Size and pattern/texture of Tile must be decide by Engr in charge |
| 10 | M&L for scratch & Joint free Glazed(Porcelain) Vitrified Tiles(GVT)/Polished Glazed Vitrified Tiles(PGVT) 9mm-10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.72 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Note : 1.Size and pattern/texture of GVT(Matt Finish)/PGVT(Glossy Finish) must be decide by Engr in charge 2.Glazed Coating on GVT/PGVT must not be less than 1mm. |
| 11 | All as per Item No. 10.00 above but in skirting complete all as specified and directed. |
| 12 | M & L for machine cut kota stone slab in flooring of floor/steps 18-20 mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing & and polishing incl demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 13 | M&L for 18-20 mm thick Granite slab work(table rubbed and polish) of approved quality of required size in Floor,Wall, Platform ,steps/riser and like bedded and jointed in grey cement slurry and pointed with coloured cement(1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder incl demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and directed. |
| 14 | M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified and directed. |
| 15 | Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 16 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.. |
| 17 | M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note- Putty shall be measured and paid seperately. |
| 19 | S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction including dismantling of Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 20 | S&F for 0.63 mm thick plain galvanised mild steel sheeting using grade ‘O’ sheets with 120 gm Zinc (Spelter) coating Per Sqm both sides inclusive, as in roofs, ridges, hips, valley gutters, drip and straight flashing fixed with ‘L’ or ‘J’ type hook & washers and fixing of valey gutter with Band/Starp/Support incl dismantling of Asbestos cement sheets complete all as specified and directed. |
| 21 | M&L in for MS steel work in tubular trusses, purlins, rafter, tubuler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4923,1997 including dismantling of timber scantlings as in timber scantling in fillets rafters, purlins etc under 40 sqcm in section complete all as specified and as directed. |
| 22 | Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying Two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed |
| 23 | S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with piano hinge to make kitchen cabinet/Almirah shutters incl D-type cabinet handles(stainless steel 304/gloss chrome/SN finished 150mm long matt finished) premium quality & Magnetic Catcher including dismantle of boarding any type complete as per manufacturer’s instructions complete all as specified and directed. Note- (Steel Handle & Magnetic Catcher per shutter will be specified by Eng in Charge) . |
| 24 | S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet/Almirah back sides complete as per manufacturer’s specifications complete all as specified and directed |
| 25 | S&F 1000ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/2.0mm-455gms/40-690gms) including dismantling of water tanks complete all as specified and directed |
| 26 | All as per above item No. 25 but 500Ltr complete all as specified and directed. |
| 27 | S&F in repair vitreous china squatting pan 'orissa pattern 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flushing pipe but incl fixing with 110mm S trap complete all as specified and directed |
| 28 | S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes but incl fixing with 110mm trap & PVC Seat Covercomplete all as specified and directed. |
| 29 | S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. |
| 30 | S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and 32 mm flush pipe suitable for IWC/EWC of polyethylene of low or high density complete all as specified and directed. |
| 31 | S&F 15 mm Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm including taking down steel tubing complete all as specified and directed. |
| 32 | S&F in repairs Pillar tap 15 mm dia fancy type, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed make seiko complete all as specified and directed. |
| 33 | S&F in repair 15mm Bib tap fancy type cast copper chromium plated alloy with capstan handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 34 | S&F in repair fancy type chromium plated 15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. |
| 35 | S&F in repair Stop Angle valve cast copper alloy chromium plated 15mm dia, screwed down, high pressure with capstan handle, screwed both ends for iron pipes or for unions and fixed ,complete all as specified. |
| 36 | S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 37 | S&F in repair 15mm dia brass CP wall mixer with provision for over head shower for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 38 | S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe complete all as specified and directed. |
| 39 | S&F in repair CP 15 mm Kitchen Sink mixutre (Swan Neck) mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc complete all as specified and directed. |
| 40 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 41 | S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and as directed. |
| 42 | S&F in repair stain less steel plate rack for kitchen 1 mm thick of size 610 x 762 x 254 mm of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge. Note:- Size and weight of rack will be decided by Engr in Charge. |
| 43 | S&F in repair corner glass shelf (with bracket) of size 150 x 150 mm complete all as specified and as directed. |
| 44 | S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 45 | S&F aluminium coloured power coated door/window/ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc including demolition of existing shutters complete all as specified and directed. Note- Wire Mesh,Glass, ACP sheet paid seperately |
| 46 | Supply only 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 47 | Supply only galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 48 | Supply only Aluminium Composite Panels (ACP) any colour of for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed. |
| 49 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking incl demolition of old stone slab complete all as specified and as directed. Note: Shape, size and colour of interlocking paver block is selected by Engr-in - charge. |
| 50 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 incl demolition of old stone slab complete all as specified and as directed. |
| 51 | M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as specified and as directed. Please Enable Macros to View BoQ information |
