|
| 1 | Item No.1:-Removing rich mix cement concrete including stacking the spoils as directed with allleads, lifts etc, complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.46.13 ) |
| 2 | Item No.2:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Additional Spec. No.Bd.A.11 Page One Number 263 (SSR 22-23 It.No.21.37 ) |
| 3 | Item No.3:Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No.As directed by Engineer incharge. (SSR 22-23 It.No.21.40 ) |
| 4 | Item No.4:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01) |
| 5 | Item No.5:-Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc Additional Spec. No.BR.47(a) Page Number 140 and B. 7, Page Number38 (SSR 22-23 It.No.14.39) |
| 6 | Item No.6:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.5 Page One Number 300 and B.7, Page.One Number 38 (SSR 22-23 It.No.25.31) |
| 7 | Item No.7:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Additional Spec. No.Bd.F.17, Page One Number 306 (SSR 22-23 It.No.26.33) |
| 8 | Item No.8:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Additional Spec.No.Bd.G.5 Page One Number 315 (SSR 22-23 It.No.27.05 ) |
| 9 | Item No.9:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.2 Page One Number 368 (SSR 22-23 It.No.32.03 ) |
| 10 | Item No.10:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces (excluding the primer coat.) etc. complete. Additional Spec. No.Bd.P.5 Page One Number 413 (SSR 22-23 It.No.36.11 ) |
| 11 | Item No.11:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.35.26) |
| 12 | Item No.12:-Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Additional Spec.No.As directed by engineer-in- charge. (SSR 22-23 It.No.42.53) |
| 13 | Item No.13:-Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. Additional Spec. No.Bd.J.2 Page One Number 355 (SSR 22-23 It.No.31.01 ) |
| 14 | Item No.14:-Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec. No. BD.V 5 page 551 and as directed by Engineer in charge (SSR 22-23 It.No.42.55) |
| 15 | Item No.15:-Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec. No.BD.V 5 page 551 and as directed by Engineer in charge (SSR 22-23 It.No.42.57) |
| 16 | Item No.16:-Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Additional Spec. No.Bd.V.9 Page One Number 555 (SSR 22-23 It.No.41.43 ) |
| 17 | Item No.17:-Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testingetc. complete. Additional Spec.No.Bd.V.30 Page One Number 565 (SSR 22-23 It.No.41.63 ) |
| 18 | Item No.18:-Providing and fixing heavy duty inter locking concrete Coloured paving blocks of60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Additional Spec. No.A directed by Engineer in charge (SSR 22-23 It.No.33.51 ) |
| 19 | Item No.19:-Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 22-23 It.No.6.36 ) |
| 20 | Item No.20: Charges for testing of material in vigilance and quality control laboratory for Concrete Compressive Strength of C.C. Cube (Set of 3 cubes) Rate as per SSR 22-23 Sr.No.19 Page No.584 |
| 21 | Item No.21:-Charges for testing of material in vigilance and quality control laboratory for Paver Blocks compressive strength, Water Absorption (Set of 8 Blocks), Flexural Test (Set of 8 Blocks), Resistance to wear (Set of 8 Blocks) Rate as per SSR 2022-23 Sr.No.26 Page No.584 |
| 22 | Item No.22:- Royalty charges b) For all other Minerals= Royalty + surcharge (2%)= 211.95 + 4.23 = 216.18 per cum. As per SSR 22-23 Section V Page No.3 Please Enable Macros to View BoQ information |
