|
| 1 | Taking down cement plaster on bricks or stone wall/ decayed surfaces of concrete from roof projectiokn or RCC Chajjas etc. including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 2 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth (with out using extra cement) incl taking down cement plaster on brick wall etc. and racking out joints hacking for key complete all as specified and directed. |
| 3 | M&L Rendering 15 mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compound mix as per manufacturer detail, finished even and smooth without using extra cement, complete incl taking down cement plaster on brick wall etc. and racking out joints hacking for key , all as specified and as directed. (WPC measured and paid seperately) |
| 4 | M&L Rendering 5mm thick on concrete surfaces in CM 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc.incl taking down old plaster complete all as specified and directed. |
| 5 | M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :-Base Coat : Berger HS Latex plus (or equivalent)consumption base coat : 0.3 kg/m2Reinforcement : Glass fiberSecond and Third coat : Latex sheild 2K (or equivalent)Consumption top coat : 3 kg/m2System reqquirements : density : 2.00 kg/ltr;Compressive strength: 0.5N/mm2Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent).Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft.All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry.Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 97 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 6 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and directed |
| 8 | M&L for pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys,hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one coat of red oxide zinc chrome primer including medium weight 03 Nos of MS butt hinges of size 75mm/100mm/125mm and 01 No 50mm aize of medium weight MS butt hinge complete all as specified and directed. |
| 9 | M&L for pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, keys,hinges lock, lock strike plate etc.made out of 1.25mm thick MS sheet including one coat of red oxide zinc chrome primer including medium weight 03 Nos of MS butt hinges of size 75mm/100mm/125mm and 01 No 50mm aize of medium weight MS butt hinge complete all as specified and directed. |
| 10 | M&L for PCC 1:3:6 type C - 1 (using 20 mm graded crushed stone aggregate) as in back filling of chowkats and bed blocks for hold fasts etc complete all as specified and directed. |
| 11 | M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and directed. |
| 12 | M&L for factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed. |
| 13 | M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 14 | M&L for 2nd Class hard wood 35mm thick factory made glazed and skelton shutters open rebated and prepared to receive glass , gauze,etc (without sash bars) edges of framing plain , chamfered or rounded. Fitted with cut and mitred beads for securing wiremesh supplied and fitted to chowkats complete all as specified and directed. |
| 15 | M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 16 | M&L for Steel window woth side hung double shutter (window consisting of two shutter out side and two shutter of similar dimention in side of Single ms frame box type hinges with steel handle of 100mm and steel peg stay, complete with glazing bars including MS guard barsand grill made out of 10mm MS square bar( grill and guard bar shall be proveded as per direction of Engr-in-Charge. |
| 17 | S&F Galvanised mild steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tank or galvanized wire staple complete all as specified and directed. |
| 18 | S&F sheet glass ordinary quality, 3mm thick glazed with oil putty oil putty or wooden beads, in square n exe, 0.5sqm each pane, complete all as specified and directed. |
| 19 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each. |
| 20 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 21 | S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 22 | S&F 150 mm size mild aluminium handles cast type anodised complete all as specified and directed |
| 23 | S&F Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and directed |
| 24 | M&L for Aluminium handle cast type anodized of size 100mm complete all as specified |
| 25 | M&L for Butt hinges 100mm medium weight stainless steel complete all as specified and directed by Engr in charge |
| 26 | M&L for Aluminum anodized barrel tower bolt of extruded section and fixed complete of size 125mm long complete all as specified. |
| 27 | M&L for Aluminium handle cast type anodized of size 125mm complete all as specified |
| 28 | M&L for Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed in floor with over all length of cover plate 150mm |
| 29 | S&F 300mm ordinary rat tail mild steel rod pattern springs incl roller and roller plate complete |
| 30 | Dismantling floor, hearth or wall tiling , terrazzo topping on walls including cement mortar , bedding (but no backing) removing serviceable tiles and rubbish off the premises complete all as specified and directed. |
| 31 | M&L for Home Sheild PU Roofkoat (or equivalent) is a one component liquid, solvent free, cold applied water-proofing membrane that is highly elastic and UV resistant with 10 years warranty. ASTM D 6083-97 a waterproofing and heat reflecting system having following key performace properties : 1. UV resistant, prevent yellowing and weathering2. Highly elastic upto 350% and crack bridging3. Excellent adhesion on porous and non-porous substrates4. Tensile strength > 10 N/mm2 with Geo Textile fleece5. Soler reflective Index (SRI) more then 109-111 ASTM E 1980-11 System :First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer (or equivalent)Coverage :0.2kg/m2 (with 50 % dilution of water)Reinforcement : Geotextile 40 gsmSecond coat : Home sheildroofkoat (or equivalent)Consumption : 0.5 kg/m2Third coat : HS PU roofkoat (or equivalent)Consumption : 0.8 kg/m2 System buildup-1.5kg/sqm with geotextile of 40 gsmFor accessible roof, tiles with scred/ adhesive may be fixed thereafter.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'EF' on page no. 105 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 32 | M&L Rendering 10mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compound finished even and smooth without using extra cement, complete,all as specified and as directed. (WPC measured and paid seperately) |
| 33 | Supply only Intergral water proofing compound liquid complete,all as specified and as directed. |
| 34 | S&F 20mm dia high density polyethylene pipes (HDPE) of pressure rating 6kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area complete,all as specified and as directed. |
| 35 | M&L for hardcore, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and directed. |
| 36 | M&L Cement Concrete type D-2 1:4:8 (40MM graded crushed stone aggregate) in foundations, fillings and mass concrete in sub base complete,all as specified and as directed. |
| 37 | M&L for 25MM thick PCC (1:2:4) type B1 with 20MM graded aggregate for laying floor tiles complete,all as specified and as directed. |
| 38 | M&l for non skid coloured Ceramic Tiles 8 to 10MM thick in light shade (square/ rectangular) polished, area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm in floors/ skirting etc jointed and pointed with tile adhesive anti slip [email protected]/sqm thickness upto 8 to 10MM( or equivalent) and epoxy materials for sealing of tile joint with Epoxy tile grout ( or equivalent) to the floor of tiles and bathroom complete,all as specified and as directed. |
| 39 | Demolition of cement concrete in and pavings( un reinforced) exc 15cm thickness below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authorities complete,all as specified and as directed. |
| 40 | Demolition of cement concrete in and pavings( un reinforced) n exc 15cm thickness below or above ground level, including removal of waste from defence land and dumping at a place as specified by civil authoritiescomplete,all as specified and as directed. |
| 41 | M&L for 75 mm thick PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed. |
| 42 | M&L for Precast designer coloured heavy duty full body paving tiles(factory made) of size 300mm*300mm*10mm top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in Cement Mortar 1:4 complete all as specified & directed. |
| 43 | M&L for Non - skid ceramic coloured jointless tile 400mm x 400mm x 7mm thick as in floors laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete, all as specified and directed. |
| 44 | M&L for Non - skid ceramic coloured jointless tiles 400mm x 400mm x 7 mm thick on vertical surfaces such as skirting /dado etc bedded & jointed in neat cement slurry over and including 10 mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles complete, all as specified and directed. |
| 45 | M&L for Glazed ceramic coloured tiles of size 350X 450X 7mm thick as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 46 | M&L Non - skid coloured ceramic tiles 7 to 8mm thick joint less (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors,etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15MM thick screed bed in cement mortar 1:4 and poinetd in white or coloured cement to match the colour of tiles, complete all as specified and directed |
| 47 | M&L Non - skid coloured ceramic tiles 7 to 8mm thick joint less (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm on verticles surfaces such as skirting/ dado etc bedded and jointed in neat cement slurry over and including 10MM thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour tiles, complete all as specified and directed. |
| 48 | S&F 20MM dia stainless steel drapery rods in one length per window/door as approved by GE providing with 2 nos of Bracket for holdinf curtain rod and Fiber and Fancy dome type or wall to wall fixed in repair complete all as specified & directed. |
| 49 | S&F 300MM ordinary rat tail mild steel rod pattern springs incl roller and roller plate complete all as specified & directed. |
| 50 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 51 | Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and directed. |
| 52 | Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for prefixing or removal complete all as specified and directed. |
| 53 | S&F Steel tubing medium grade galvanised of 20mm bore with all fitting and fixed complete to walls and ceiling or laid in floors. Make ISI marked |
| 54 | S&F Steel tubing medium grade galvanised of 15 mm bore with all fitting and fixed complete to walls and ceiling or laid in floors. Make ISI marked |
| 55 | Refixing old galvanised steel tubing of 20 mm bore and connections in new or old position with all fittings fixed complete to walls , ceiling, or laid in floors etc. Complete all as specified and directed. |
| 56 | Refixing old galvanised steel tubing of 15 mm bore and connections in new or old position with all fittings fixed complete to walls , ceiling, or laid in floors etc. Complete all as specified and directed. |
| 57 | S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed. |
| 58 | S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed. |
| 59 | S& F in repair Low level flushing cidtern PVC valveles ,syphonic action type flushing cistern white with inlet valve,float and handle including bracket etc as specified. |
| 60 | S& F PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed. |
| 61 | S&F wall mounted bathroom glass looking mirror beveled edge of selected quality glass 5mm thick frame less with CP brass screws and cup washer etc fixed in repair complete all as specified and directed. |
| 62 | S&F stainless steel 6 pin wall hangers fixed by means of screws by drilling in to the wall screwing into the wooden door complete all as specified and directed. |
| 63 | S&F Tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between Hangs, fixed in repairs complete all as specified and directed. |
| 64 | S&F Stainless steel grating of 125mm size (square/round), male/female pattern with or without hole, fixed in nahani/floor traps with white/coloured cement, fixed in repairs, complete all as specified & directed. |
| 65 | S&F in repair 32mm dia PVC waste pipe complete all as specified & directed. |
| 66 | S&F vitreous china wash basin white flat back size 580x450mm excluding taps waste chain and plug and porcelin stopper but includin g brackets fix in repairs in RCC slab complete all as specified and directed. |
| 67 | S&F Bib taps 15mm dia cast copper alloy fancy type chromium plated, screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and directed. |
| 68 | S&F Stop cock/ angle valve 15 mm cast cooper alloy of screwed down high pressure with crutch or butter fly handle , screwed with ends for iron pipe or unions fixed in repairs complete all as specified and directed. |
| 69 | S&F in repair CP brass hot & cold 15mm dia wall mixture with provision for overhead shower with 115 mm long bend pipe on upper sie connecting legs & wall flanges for mixing hot & cold water complete all as specified and directed. |
| 70 | S&F in repair for WHB brass CP mixer for mixing hot and cold water screwed down for iron pipe and fix complete all as specified and directed. |
| 71 | S&F Shower rose of C.P. swival joint of size 125mm for fixing 15mm pipe including fixing to steel pipe or union fixed in repairs complete all as specified and directed. |
| 72 | S&F in repairs 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fix in repairs complete all as specified and directed. |
| 73 | S&F Sheet Glass Self Assembly consisting of 505mm thick sheet glass self 12CM wide with CP bracket guard and railing 60 CM long complete all as specified and directed. |
| 74 | M&L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. |
| 75 | M&L for TMT round bars (Fe 500), 6-8mm mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. |
| 76 | M&L Precast reinforced cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in cover slab set in CM 1:6, complete all as specified and directed. Note : (Reinforcement shall be measured and paid separately). |
| 77 | Demolition of cement concrete (Re-inforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 78 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for in plinth protection complete all as specified and directed. |
| 79 | M&L for 75 mm thick PCC 1:3:6 type C-1, (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement incl necessary joints complete all as specified and directed. |
| 80 | Dismantling cast iron or reinforced concrete drain pipes of 75/100mm bore, fixed with walls and taking out of trenches, if required all as specified and directed. |
| 81 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall including fixing clamps complete all as specified and directed. |
| 82 | S&F PVC SWR pipe single socketed in any length to be fixed in trenches upto First Manhole of 110mm bore complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wall including fixing clamps complete all as specified and directed. |
| 84 | S&F PVC SWR bends any radius 110mm bore with access door complete all as specified and directed. |
| 85 | S&F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 87 | S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs complete all as spd & directed. |
| 88 | S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door ccomplete all as specified and directed. |
| 89 | M&L for PVC (SWR) Multi floor trap diameter of outlet 75mm with grating incl jointing with solvent cement. |
| 90 | S&F PVC (SWR) floor trap , plain with grating including jointing with solvent cement of 75mm outlet dia all as specified |
| 91 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed Please Enable Macros to View BoQ information |
| 92 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed Please Enable Macros to View BoQ information |
