Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | NOTE:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed. |
| 3 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast as required complete all as specified and as directed. |
| 4 | Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and removing from site complete all as specified and as directed. |
| 5 | Taking down steel rolling shutter of any description area exceeding 20Sqm but not exceeding 35Sqm each, height appx 6.5m, ball bearings and gear operated, and refixing in same opening and ensuring proper working condition after replacement of ball bearing, repairing to gear, broken/rusted steel members by welding, and necessary any other minor repairs, adjustment /alignment easing to slide, greasing, filling gear oil, stoppage of leakage etc complete all as directed. |
| 6 | Supply and fixing factory made uPVC white colour casement (Open-able, double shutter glazed and wire guage, Net Opening area not exceeding 1Sqm ) window/ventilator made of extruded profiles with wall thickness of 2.3mm (± 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 ± 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Including Hardware:[casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 7 | Supply and fixing factory made uPVC white colour Three track three panels sliding window (area exceeding 1 Sqm and not exceeding 2 Sqm) with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 90 x 42 mm & sash 31 x 57 mm both having wall thickness of 2.3 ± 0.2 mm and single/double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (as per approved sample), including 5mm thick toughened glass and Wire cloth Stainless steel 304 Grade, natural finish, 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 8 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhats (Single Rebated) of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 9 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhats (Single Rebated) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 10 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhats (double Rebated) of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 11 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhats (double Rebated) of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 12 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stopper - 1 nos. per leaf |
| 13 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) decorative type glazed/gauge Skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with butt hinges with necessary full body threaded star headed counter sunk S.S screws including S&F wire cloth complete all as specified and as directed including supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stopper - 1 nos. per leaf (f) Stainless Steel (304 Grade) (natural finish) wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm, fixing as per manufacture |
| 15 | Supply & fixing factory made steel window box type using ERW hollow 'P' section and double angle frame, with side hung shutters (glazed shutter and fly proof shutter) complete including grill of 8mm sq bar fixed horizontally @ 100 mm C/C and fittings like hinges, tower bolt, stop leg, handle and duly fixed Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, fixing of lugs in PCC etc., width, height and design of window as directed by GE Including taking down existing window complete all as specified and as directed. |
| 16 | Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.Note :- (i) Glass & wire mesh shall be measured and paid separately under respective item of Sch |
| 17 | Material and labour for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges, pivots, Aluminium mongery/fittings and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed. Note :- (i) Glass & wire mesh shall be measured and paid separately under respective item of Sch |
| 18 | Material and labour for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and as directed. |
| 19 | Dismantling steel work of any description like cooler stand, grills, grating, walk ways, railings, frame work of water tanks, framed work of motor pump, doors, gates and similar work etc. but excluding framed truss etc. complete all as specified and as directed. |
| 20 | Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including fabrication as directed, including hold fast, locking arrangement, sliding door bolt, stopper etc. conforming to Fe-410-W (Gde E-250) quality A, complete all as specified and as directed. |
| 21 | Supply & fixing 4mm thick sheet glass ordinary quality in squares / rectangular in any size of each pane and fixed complete all as specified and as directed. |
| 22 | Supply & fixing 5mm thick sheet glass ordinary quality in squares / rectangular in any size of each pane as in aluminium doors, window, partitions and similar work including cutting to shape complete all as specified and as directed. |
| 23 | Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body cover with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, compliance with IS 6315:1992 amended upto date complete all as specified and as directed. |
| 24 | Supply & fixing aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed (IS Marked) complete all as specified and as directed. |
| 25 | Material and labour for roller venetian blinds (size and design approved by GE) including rails, runners, strips and opening/closing arrangement fixed to opening such as window/ventilators etc. complete all as specified and as directed. |
| 26 | Supply & fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, Overall length of cover plate 150mm, complete all as specified and as directed. |
| 27 | Supply and fixing mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to frame with steel screw complete all as specified and as directed. |
| 28 | Supply and fixing Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 29 | Supply & fixing in repair/replacement Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed including fixing material in any situation complete all as specified and as directed. |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4mm thick sheet glass ordinary quality in squares / rectangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with and including fixing material as per existing or as directed complete all as specified and as directed. |
| 31 | Hacking out old broken glass (any thickness, size, quality or description) from metal or any frame including punching or drilling out old glazing pins/beadings and Supply & fixing new 4mm thick figured glass pin head type in squares / rectangular not exceeding 0.5sqm in each pane and fixed in any type of ventilators with and including fixing material as per existing or as directed complete all as specified and as directed. |
| 32 | M & L for Cupboard shutter, shelves made out of WPC board 18/19mm thick, density over 600kg/Cum, shelves fixed with SS brackets/cleats as required complete all as specified and as directed. Note: (i) Accessories such as soft close hinges and handle shall be measured and paid separately as supply only (ii) SS brackets/cleats for fixing the shelves and other minor items not otherwise described shall be deemed to be included in the unit rate quoted. Make of WPC board :- Floresta gold series or Techno commercial equivalent in make mentioned in Appendix 'B |
| 33 | Supply & fixing 100mm long aluminium anodised hasp & staple, safety type, with hinge pin including bolt to hinge plate fixed with and including SS screws complete all as specified and as directed. |
| 34 | Supply and fixing 5mm thick tinted glass fixed with silicon on aluminium profile as kitchen cabinet (overhead wall unit ) shutter complete all as specified and as directed. Note: (i) Aluminium black frame profile and soft close hinges shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted. |
| 35 | Supply only soft closing/self-closing concealed hinges (cabinet hinge) full overlay, opening angle 105⁰, made of stainless steel (SS-304 grade), nickel plated finish complete all as specified and as directed. Make :- Hafele / Bosney / Hettich |
| 36 | Supply and fixing in replacement stainless steel sink with drainage board, AISI 304 quality grade, made out of 1.00mm thick sheet, glossy finish, for kitchen, with plugs washers and CP waste coupling of 32mm dia, waste pipe (flexible) 800mm long and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed. |
| 37 | Supply and fixing Kitchen Rack / Dish Rack of size 914mmx787mmx250mm (Appx size) glossy finish made out of Food Grade Stainless Steel 0.6 mm thick sheet/strip including necessary arrangements for plates and utensils to keep (Holds up to many plates or bowls To accommodate several place settings, Multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories, fixed in position as directed with SS screws/fasteners etc. complete all as directed. |
| 38 | Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer including taking down old existing curtain rod any type complete all as specified and as directed. Note: (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. (ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 39 | Supply only stainless steel 202 grade brackets for fixing of 25mm bore curtain rods complete all as specified. |
| 40 | Supply only stainless steel 202 grade finials for fixing of 25mm bore curtain rods complete all as specified. |
| 41 | Supply only stainless steel 202 grade side holder for fixing of 25mm bore curtain rods complete all as specified. |
| 42 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance upto 5Km as directed as directed from the site complete all as specified and as directed. |
| 43 | Dismantling of interlocking tile/paver block/brick etc. (laid flat or on edge etc.) laid dry or pointed complete all as specified and as directed. |
| 44 | Dismantling of floor hearth or wall tilling/terrazzo including cement mortar bedding layer but not backing including prepared the surface clean to receive further treatment including removing rubbish material from building and thrown in low lying empty area at any distance upto 2.5 KM as directed from the site complete all as specified and as directed. |
| 45 | Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Dismantling of stone slab tiling including cement mortar bedding layer ( but not backing) and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed. |
| 47 | Material and labour for 20 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note: - (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of Schedule 'A' BoQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. |
| 48 | Material and labour for 15 mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note: - (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of Schedule 'A' BoQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. |
| 49 | Material and labour for 5mm thick bedding layer (screed bed for tiles) in cement mortar (1:4) in grey cement including mixing of liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg, and finish the surface even and fair/rough to receive the tile complete all as specified and as directed. Note: - (i) Liquid Water Proof Compound shall be measured and paid separately as supply only under appropriate item of Schedule 'A' BoQ. (ii) The labour element of mixing of Liquid Water Proof Compound is included in this item. |
| 50 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 51 | Material and labour for providing Double charge vitrified coloured tiles (approved shade), area of each tile exceeding 0.36 Sqm but not exceeding 1.44 Sqm, having thickness more than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors/skirting etc., set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 52 | Material and labour for providing Glazed Vitrified Tiles (GVT) or Porcelain coloured tiles (approved shade, suitable for swimming pool), area of each tile not exceeding 0.04 Sqm, having thickness 8 mm thick, having non-slippery gripped tiles, having water absorption rate less than 0.5%, laid as in floors and vertical area of swimming pool, set and jointed using high-quality, polymer-modified, water-resistant tile adhesive (thin bed), Type 3T confirming to IS-15477:2019 or a similar standard like C2TES1 as per EN 12004, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout as per approved shade by GE, (grouting with Three Component, High Performance Epoxy Tile Grout, exceeds EN 13888 requirements), tested in accordance with AATCC 30 PART 3, in any position in swimming pool internal / external angles for wall, floor and corners to meet the World Aquatics / FINA criteria, including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 53 | Material and labour for providing first quality scratch free, Max grip anti-slip vitrified tiles with safety marking area, coloured tiles (approved shade/design), area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm (square/rectangular), having thickness 10 mm thick, having anti-slip properties R-Value R-11 as per German standard (DIN 51130 & 51097), premium quality having water absorption rate less than 0.5%, straight edge, stain free, laid as in floors (external area of swimming pool), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 5mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 54 | Material and labour for providing glazed ceramic coloured tiles (approved any shade in any pattern of light & dark/highlighters tiles etc. as approved) area of each tile exceeding 0.06 Sqm and not exceeding 0.18Sqm having thickness 7-8 mm thick, Premium quality having water absorption should be between 10% to 20%, straight edge, stain free, glossy finish, laid as on vertical surfaces such as in skirting/dado etc.,, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 55 | Material and labour for providing Digital glazed vitrified tiles (DGVT) coloured tiles (any shade in any pattern of light & dark, highlighters tiles etc as approved) area of each tile exceeding 0.42 Sqm and not exceeding 1.0 Sqm having thickness 9-10 mm thick, Premium quality having water absorption less than 0.5%, straight edge, stain free, glossy finish, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 56 | Material and labour for providing Double charge vitrified coloured tiles (approved light shade), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, having thickness not less than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 57 | Material and labour for providing Double charge vitrified coloured tiles (approved light shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, having thickness not less than 8mm, premium quality having water absorption less than 0.08%, straight edge, stain free, glossy finish, square marbonite, laid as in floors and skirting, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 58 | Material and labour for providing Anti-skid vitrified tiles, matte finish, coloured tiles (approved shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge, stain free, glossy finish, laid as in floors, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed.Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 59 | Material and labour for providing Anti-skid vitrified tiles, matte finish, coloured tiles (approved shade), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge, stain free, glossy finish, laid as in floors, set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, fixed the tile using spacer 3mm or as per manufacturer’s instruction and joint filled with epoxy grout matching with the colour of tiles including necessary cutting as per site requirement, complete all as specified and as directed. Note: Screed bed shall be measured and paid separately under respective item of BOQ |
| 60 | Material and labour 16-18mm thick green marble (approved shade ), machine cut, duly factory grinding and polishing (table rubbed and polished) as in cooking platform, in steps, jambs, pillars, window-cills, for counter sunk wash basin and like or where directed, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of marble, including cutting as required including cleaning and extra polishing if required complete all as specified and as directed. Note : (i) Single piece should be used in steps/cills/jambs/shelves/ equal to width of slab, including accommodate the hole for gas pipe/mixer valve (where required) and chamfering/rounding the outer edges, nothing extra shall be paid on this account. (ii) Screed bed shall be measured and paid separately under respective item of BOQ |
| 61 | Material and labour 18-20mm thick Granite (approved shade like dark black, mahroom etc.), machine cut, duly factory grinding and polishing (table rubbed and polished) as in cooking platform, in steps, jambs, pillars, window-cills, for counter sunk or table top wash basin, vanities counter, as in skirting and like or where directed, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of granite, including cutting as required including cleaning and extra polishing if required complete all as specified and as directed. Note : (i) Single piece should be used in steps/cills/jambs/shelves/ equal to width of slab, including accomodate the hole for gas pipe/mixer valve (where required) and chamfering/rounding the outer edges, nothing extra shall be paid on this account (ii) Screed bed shall be measured and paid separately under respective item of BOQ |
| 62 | Material and labour for machine cut 18-20mm thick (minimum), Kota stone slab (size of slab not less than 550x500mm for flooring including 75mm wide white marble strips (border) all-around of room/verandah, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed. Note : (i) Screed bed as required shall be measured and paid separately under respective item of BOQ |
| 63 | Material and labour for machine cut 15-18mm thick, Kota stone slab as in skirting, dado and on pillar, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including machine cutting to make it square or rectangular as per site complete all as specified and as directed. Note : (i) Screed bed if required shall be measured and paid separately under respective item of BOQ |
| 64 | Material and labour for machine cut 18-20mm thick (minimum), Kota stone slab in single piece for treads of staircase, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site and chamfering/rounding the outer edges, complete all as specified and as directed. Note : (i) Screed bed if required shall be measured and paid separately under respective item of BOQ |
| 65 | Material and labour for machine cut 15-18mm thick, Kota stone slab as in riser of steps of staircase, set & jointed in and including neat cement slurry @ 3.00 Kg/ Per Sqm and pointing in white cement mixing with pigment to match with shade of slab, including rubbing /grinding and polishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed. Note : (i) Screed bed if required shall be measured and paid separately under respective item of BOQ |
| 66 | Material and labour for anti skid full body vitrified step tiles 10mm thick as in riser, skirting (single piece length wise upto 1200mm), set and jointed using type-2 adhesive (thin bed) confirming to IS-15477:2019, complete all as specified and as directed. |
| 67 | Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block & similar work etc. including form work complete all as specified and as directed. |
| 68 | Material and labour for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, hard standing, path etc., laid in suitable panels not exceeding 3.00 m length finished even and smooth without using extra cement, 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant complete all as specified and as directed. |
| 69 | Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm but exceeding , deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 70 | Material and labour for 100mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 71 | Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 72 | Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed by Engineer-in-charge. |
| 73 | Material and labour for 25mm thick PCC in cement mortar (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, the surface finished fair/rough complete all as specified and directed by Engineer-in-Charge. |
| 74 | Material and labour for 40mm thick cement concrete 1:2:4, Type-B-1 , using 20 mm graded stone aggregates as in floors and finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specified and as directed. |
| 75 | Material and labour for 100mm thick cement concrete 1:2:4, , using 20 mm graded stone aggregates as in sub base of pavement, hardstanding and finishing surfaces of concrete topping even and fair complete all as specified and as directed. |
| 76 | Material and labour for formwork to side walls of drains for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 77 | Material and labour for chequered cement concrete tiles of size 30cm x 30cm x 25mm thick laid as in floor/path, made by table vibratory method using PU/rubber mould, with grey cement and colour pigment any shape, size, colour / pattern (as approved), set and jointed in neat cement slurry @ 3.00 Kg / Per Sqm complete all as specified and as directed. |
| 78 | Supply and laying/fixing 60mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-35 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 79 | Supply and laying/fixing 80mm thick factory made chamfered edge cement concrete paver block/ interlocking tile of M-40 grade, prepolished & preglazed, with approved colour, design & pattern (laid in required colour & pattern as directed) as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 80 | Material and labour for PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in coping, mud stops, packing sides/around of interlocking tiles, bed block, thrust block, for embedded posts & similar work etc including weatherings, slightly rounded or chamfered angles complete all as specified and as directed. |
| 81 | Material and labour for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in surface channels, benching/coping of manholes/drains, including necessary form work etc. complete all as specified and as directed. |
| 82 | Material and labour for PCC (1:3:6), type C-1 using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed. |
| 83 | Material and labour for 25mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers and jallies (measured solid) including all moulding frame (Pre cast frame) and set in cement mortar (1:6) including necessary form work complete all as specified and as directed. |
| 84 | Supply and fixing SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation, ISI marked confirming to IS-12592), clear opening 560X560mm & External size of frame 740X740X90mm including Manhole cover, fixed & set over manhole in CM 1:4 complete all as specified and as directed |
| 85 | Material and labour for Cutting into existing manholes for connecting new drains 150 mm dia to 300mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete as specified and as directed. |
| 86 | Dismantling brick terracing tiles single layer from roof laid and pointed in cement mortar including removing from the site complete all as specified and as directed. |
| 87 | Demolition/taking out any type roof treatment, any thickness, like mud phuska, APP membrane etc. from roofs, including removing/cutting uprooting grass, vegetations and roots of small plants etc. on roof and surrounding/parapet wall etc., including cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. and washing with water and preparing the roof surface to receive further treatment including removing rubbish material from building and thrown in low lying empty area at any distance upto 5 KM as directed complete all as specified and as directed. Note: - Only Plan area of roof will be measured for payment. Cost for removing/cutting uprooting grass, vegetations etc. from area for surrounding/parapet wall etc. shall deemed to be included in unit rate quoted, nothing extra shall be admissible on this account. |
| 88 | Removing small grass, roots of small plants etc. on roof and surrounding/parapet wall etc., including cleaning of surface of loose dust, and dirt and cement slurry etc. by means of wire brush, dust removing brush and scraper etc. and washing with water and preparing the roof surface to receive further treatment complete all as specified and as directed. |
| 89 | Material and labour for repair of surface with GP-2 (General Purpose Grout) or repair mortar upto 15mm thick as per site condition/ manufacturer’s instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturer’s instructions complete all as specified and as directed. Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. |
| 90 | M and L for cleaning surface of any loose dust, dirt or slurry by means of wire brush, dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating, after primer applying single component waterproofing liquid membrane based on pure, polyurethane resin cold applied with spray, applied PU membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strength not less than 2Mpa. No leakage upto five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry film thickness), In two or more layers (each layer minimum 750 micron) or as per manufacturer’s instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed. Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. Note: - (i) Payment will be made after providing warranty certificate for 10 years from the company. (ii) The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved lab. The sample size for check should be 50x50mm randomly at any location and kept in record. |
| 91 | Material and labour for Providing PCC coving/ gola along vertical parapets of size 75 mm X 75 mm with concrete M20 (Nominal Mix) using 20 mm crushed stone aggregate including supply and mixing liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg complete all as specified and as directed. |
| 92 | Material and labour for 25mm average thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in roof slab padding, increasing uniformly towards ridges to maintain a chain slope, the top shall be trowelled and finishing the surface even and smooth complete all as specified and as directed. |
| 93 | Demolition of cement concrete and digging out (unreinforced) as in sunken floor area of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed. |
| 94 | Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method complete all as specified and as directed. |
| 95 | Material & Labour for PCC (1:5:10) type E2 using 40mm graded AAC sludge/bats as filling of sunken floors complete all as specified and as directed. |
| 96 | Material and Labour for Rebuilding the section of damaged RCC elements to its original size in thickness upto 100mm by providing and casting with ready to use non shrink, cementitious free flow micro-concrete having compressive strength > 60 N/sqmm (28 days) according to ASTM C 1107-99, including providing and fixing of water tight foam faced finish shuttering of minimum 18mm thickness and supporting formwork, all lead fit, mixing, placing, de-shuttering, levelling the surface by grinding off cementitious slurry or cementitious joints differences if any for satisfaction of Engr-in-charge and curing thereof including all required scaffolding/ladders complete all as specified and as directed. Note: - Mode of measurement: per Cum of micro concrete. Make: Sika- SikaRep Microcrete 4/ Fosroc- Renderoc RG/Pidilite Dr Fixit Micro concrete / MBTCC / I-CanNano or Techno commercial equivalent make approved by GE in writing from E-in-C's Br approved list. |
| 97 | Material and Labour for Making 'V' groove of 5mm wide and 5mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and Sealing of exposed 'V' groove of 5mm deep and 5mm wide with solvent-free, moisture tolerant thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C, according to ASTM C 88 1-78, Type I, Grade 3, Class B+C, compressive strength >60 N/mm2 (14 days) according to ASTM C 881 : bond strength > 10 N/mm² (7 days) according to ASTM C 882 including all required scaffolding/ladders complete all as specified and as directed. Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. |
| 98 | Material and Labour for Drilling holes of 12mm die upto 100 mm deep holes in structural members at the interval of 300mm in staggered manner or along the crack line in reinforced concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm die NRV (Non-Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix it inside the hole by applying thixotropic cementitious to ensure complete sealing and allow to cure the system for minimum of 8 hrs before Grouting including nozzle projections, excess putty, if any, over concrete element remove by gridding, levelling and finishing the external surface after completion of the work etc. including all required scaffolding/ ladders, formwork if required as per site requirement complete all as specified and as directed. |
| 99 | Material and Labour for Grouting injecting two part, low viscosity, moisture insensitive injection- liquid, based on high strength epoxy resin , by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having mixed density 1.1 kg/ltr (at + 27ºC) : Viscosity -250 m Pass at + 30ºC and should comply according to ASTM C 881 Type II and IV , Grade-I, class E+F and should have below properties; Compressive strength >= 70 N/Sqmm (7 days) according to ASTM C 579 : Tensile strength -50N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638 : Tensile module- 2000N / Sqmm after 7 days at +30ºC cure) according to ASTM D 638, Bond strength -10.8N / Sqmm (failure in concrete ) after 14 days at +30ºC cure) according to ASTM D 638 : Bond strength : Flexural strength -50 N / Sqmm according to ISO 178. Seal with nozzle with thixotropic epoxy putty after the refusal of grout material from the nozzle. Note :- Leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost including all required scaffolding/ ladders complete all as specified and as directed. Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. |
| 100 | Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. |
| 101 | Taking up or down existing galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. |
| 102 | Taking up or down existing galvanised steel water tubing (GI pipe) 25mm bore including fitting/connection from wall, ceiling, floor etc. complete all as specified and as directed. |
| 103 | Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. |
| 104 | Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 105 | Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
