|
| 1 | M&L for Cement concrete roofing tiles, rustic red colour, 420mm x 330mm size of 230 kg minimum breaking strength, double groove design, as in roofing, interlocking at side joints, laid dry as in roofing, complete all as specified and as directed. Make: Model INDOGRACE of ETERNA or Equivalent make as specified here in after. |
| 2 | M&L for Cement concrete Rusted Red/Grey colour Ridge cap of size 360mmx207mm x 240mm, with and including 15mm thick in roofing bedded and jointed in cement mortar 1:6, complete all as specified and as directed. Make: Model INDOGRACE of ETERNA or Equivalent make as specified here in after. |
| 3 | S&F Mild Steel Corrugated Galvanised Steel Sheet 0.45mm thick of class 8, grade of zinc coating 275, as in roof covering with two corrugation side laps fixed with coach screws & washers, with and including dismantling u/s AC sheet roofing and removing rubbish off the premises, complete all as specified and as directed. |
| 4 | S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle, channel, hollow sections or flat sections including wind ties, distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', complete all as specified and as directed. |
| 5 | S&F Pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers, with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. |
| 6 | S&F Pre painted galvalume aluminium zink coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter, fixed with self tapping screws and washers, including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. |
| 7 | S&F Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165, with and including dismantling existing wrought iron or mild steel work of any description, complete all as specified and as directed. |
| 8 | M&L for PCC type C0 [1:3:6] using 12.50mm graded stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of old cement concrete of any type, complete all as specified and as directed. |
| 9 | S&F Aluminium Composite Pannel board of 4mm thick, comprising of a core containing not less than 70% non combustible mineral filling, sandwiched between two skins of 0.50mm thick aluminium alloy PERALUMAN-100 of weight not less than 7.6kg/Sqm, with all sub structures, anchors, hardware and all fittings, fixed over and including aluminium section of size 35x25x2mm and 1.0m x 0.30m panel with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified. Note: Measurements shall be taken as flat as fixed without any allowance for laps. |
| 10 | M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 11 | M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including supply & fixing powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. |
| 12 | M&L for Pre-cast light weight AAC block (600mm x 200mm x 200mm) masonry exc 10cm width and setting in CM 1:4, with and including demolition of existing masonry work of any description, complete all as specified and as directed. |
| 13 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 14 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete etc., complete all as specified and as directed. |
| 15 | M&L for 10mm thick Rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finish the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 16 | M&L for 10mm thick Rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. |
| 17 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer with and including a coat of wall care putty, complete all as specified and as directed. |
| 18 | M&L for Complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss and efflorescent salts, oils & greasy spots etc., and two coats of oil bound distemper over a coat of alkali resistant primer and applying a coat of wall care putty with and including preparation of old surfaces of any description, complete all as specified and as directed. |
| 19 | M&L for Complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of old surfaces of any description, complete all as specified and as directed. |
| 20 | M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.09Sqm but not exceeding 0.11Sqm, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 21 | M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exceeding 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 22 | M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed. |
| 23 | M&L for Machine cut Granite stone slab, 20mm thick, premium quality, any colour, as in dado / skirting, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified. |
| 24 | M&L for Machine cut Cudappah stone slab 20-25mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor tiles of any description, complete all as specified. |
| 25 | M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 26 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc. 1.5sqm each, complete all as specified and as directed. |
| 27 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed. |
| 28 | M&L for Factory made 2nd class hard wood Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 29 | M&L for Factory made 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails and divided into square with plain chamfered or rounded mitred and rebated sash bars any numbers size of members of shutters as specified in SSR Part-I Section 8 Clause 8.24(b) supplied and fitted to chowkats, complete all as specified and as directed. |
| 30 | M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed. |
| 31 | M&L for Factory made 2nd class hard wood plain, framed, panelled door shutter 35mm thick, two panels with lock rail and panels of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkats, complete all as specified and as directed. |
| 32 | M&L for solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing, complete all as specified and as directed. |
| 33 | M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Pannelling of prelaminated PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and as directed. |
| 34 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 35 | M&L for Preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 36 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 37 | S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed. |
| 38 | S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed. |
| 39 | S&F MS butt hinges cold rolled medium weight 75mm size, ISI marked, complete all as specified and as directed. |
| 40 | S&F Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. |
| 41 | S&F 100mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 42 | S&F 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed. |
| 43 | S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed. |
| 44 | S&F Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete, complete all as specified and as directed. |
| 45 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 46 | M&L for Rubber coated chequered cement concrete tiles of size 300mm x 300mm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, with and including demolition of existing floor tiles of any description, complete all as specified and as directed. |
| 47 | S&F Unplasticised PVC (uPVC) pipe of 15mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed. |
| 48 | S&F Unplasticised PVC (uPVC) pipe of 20mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed. |
| 49 | S&F IN REPAIR 15mm dia Bib tap, cast copper alloy Fancy type CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 50 | S&F IN REPAIR 15mm dia Stop valve fancy type chromium plated with long shank and cup (concealed type) screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 51 | S&F IN REPAIR Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern and flush pipe) including plastic water closet seat cover closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts, etc, complete all as specified and as directed. |
| 52 | S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed. |
| 53 | S&F PVC connections 15 mm size with PTMT nuts 600mm long, complete all as specified and as directed. |
| 54 | S&F IN REPAIR 600mm x 450mm x 5.50 mm thick bevelled edged mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium frame all around, complete all as specified and as directed. |
| 55 | S&F IN REPAIR Vitreous china wash basin, white, size 550x400mm, including CI brackets, with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc., complete all as specified and as directed. |
| 56 | S&F IN REPAIR Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 57 | S&F IN REPAIR Soap dish, vitreous china, white of size 160mm x 160mm x 90mm fixed with plugs with chromium plated brass screws, completeall as specified and as directed. |
| 58 | S&F IN REPAIR Health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook, complete all as specified and as directed. |
| 59 | S&F IN REPAIR Tubular towel rod 600 mm, brass chromium plated, fixed to walls with plugs and chromium plated brass screws, complete all as specified and as directed. |
| 60 | S&F IN REPAIR 15mm bore 2 way Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc., compete all as specified and as directed. |
| 61 | S&F IN REPAIR seat cover for EWC closed pattern with flat bottom and mild steel chromium plated hinging device, complete all as specified and as directed. |
| 62 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), ISI Marked, three layered, 1000 Litres capacity, hoisted and fixed in position all as specified in SSR Part I, with and including 25mm dia PTMT ball valve, with and including taking down & removing existing water tank of any capacity, complete all as specified. |
| 63 | S&F Non-Magnetic Green Chalk Board of size 8 feet x 4 feet, for Classroom & Teaching with Heavy Particle Board Core + Non-Scratching & Non-ghosting HPL Chalk Grade Writing Surface (IS-2046 Certified), 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners, fixed to wall with necessary sub structures, anchors, hardware etc., 100% spotless, 100% scratch-free & 100% warp-free non-fading high adhesion melamine high-pressure laminate (HPL) writing surface, designed specifically for writing application, Virgin ABS (high-strength & low-gloss) corners for a seamless finish & superior looks, complete all as specified. |
| 64 | S&F uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed. |
| 65 | M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and no pigment, with and including 50mm thick river sand cushion under interlocking paver block with watering and consolidation, with and including demolition of existing floor tiles of any type, complete all as specified and as directed by the Engineer-in-Charge. |
| 66 | M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 67 | S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 68 | S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed. |
| 69 | S&F uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 70 | S&F uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed. |
| 71 | M&L for water proofing treatment including complete removal of old roof treatment, removal of debris out side MD land and applying new roof treatment consisting of following:- (a) Removing existing plastic felt roof treatment with cement screed, preparation of roof surface by brushing with a neat cement slurry @ 3Kg/SqM and applying 10mm thick plaster with cement mortar (1:3) mixed with WPC @3% by weight of cement. (b) Preparation of roof surface thoroughly cleaning by using wire brush [Mechanical / hand brush] to make it free from any loose particle, dirt / dust, etc. and applying one coat of cold applied bituminous primer @ 0.20 Lit per sq.m. (c) Providing Atactic polypropylene polymeric modified prefabricated water proofing membrane five layered reinforced with non woven polyester matt of minimum 4mm thick weight not less than 4.5Kg/Sqm shall be laid using butane torch application over entire roof surface with over laps of 100mm in both the directions. (d) Ponding complete all as specified and as directed by Engineer-In -Charge.(e) Finally roof shall be finished with two coats of bituminous aluminium paint @ 0.10 Kg/Sqm for each coat. Note: WPC shall be measured and paid separately. |
| 72 | M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including PVC concealed rigid conduit (minimum 20mm) medium grade ISI marked, with accessories, junction boxes, tees, terminal boxes with and including factory made Metal boxes with modular top cover plates with frame for modular switches & sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate. |
| 73 | All as per Serial Item No. 71 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified. |
| 74 | All as per Serial Item No.71 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified. |
| 75 | All as per Serial Item No. 71 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified. |
| 76 | S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed. |
| 77 | S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module, 240 Volts, complete all as specified and as directed. |
| 78 | S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed. |
| 79 | S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed. |
| 80 | S&F Modular BLDC Fan regulator, 240Volt, 120Watt, 2 modular electronic 2 step type, 2 Module, for ceiling fan of any sweep, complete all as specified. |
| 81 | S&F Ceiling rose, 3 terminals PVC / Polycarbonate, complete all as specified and as directed. |
| 82 | S&F IN REPAIR LED Professional Luminaries batten type fitting warm / cool white 1X20watt, 220Volt, >120 lum/W, PF>0.95, AC, indoor aluminium housing LED battens, integrated type batten with THD<10% with polycarbonate diffuser, with and including all accessories, pre-wired and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 83 | S&F IN REPAIR MCB SP 40Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 84 | S&F IN REPAIR LED Professional luminaires surface mounting and decorative type 1x40 watt fitting, indoor aluminium extruded LED battens, 220Volt AC, PC co-extruded IP 65 suitable for on grid / wall surface including with high efficiency LEDs not less than 120lum/watt, colour temp 3000-5700k complete with driver and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. |
| 85 | S&F IN REPAIR LED Building Security light fitting 35Watts, 230 volts, >110lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. |
| 86 | S&F Ding Dong type Calling Bell, 230Volt, AC, complete all as specified. |
| 87 | S&F Modular Bell push, 5Amp, 230Volt, 1 Module, complete all as specified. |
| 88 | S&F IN REPAIR factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for MCCB / MCBs as outgoings, complete all as specified. |
| 89 | S&F IN REPAIR MCCB, 3pole, 125 Amps, 415Volts, thermal magnetic, Ics=100% Icu, 16kA current rating conforming to IEC-60947-II along with spreader incl Phase Barreir to be fixed in distribution board, complete all as specified. |
| 90 | S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 230 volt, 12Way, double door, IP-43 protection with 200 Amp rated copper bus bar 230Volt, complete all as specified. |
| 91 | S&F IN REPAIR MCB SPN 40 to 63Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 92 | S&F IN REPAIR MCB SP 16 to 32Amp, 10kA, 230Volt, B curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed. |
| 93 | Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric FR power cable [heavy duty] of size 4core x 25.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work & cable protection pipe shall be measured and paid separately under respective items. |
| 94 | M&L for Concealed Circuit / Sub main wiring with Two runs of 6.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through and including rigid PVC conduit of size 25mm (medium grade) with accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of casing & capping shall be measured as one unit. |
| 95 | M&L for Double wall corrugated high density polymer (SDR 17) of ISI marked 63mm outer dia and 50mm inner dia including necessary fittings like couplers, bends, end caps etc., with ISI marked (IS 14930- 2001 ), laid in trenches / floors & fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables / road crossings etc., complete all as specified and as directed. |
| 96 | S&F Galvanised steel water tubing 50mm bore dia, medium grade, conforming to IS:1239 (Part I) with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and laid under trench / floors and including testing, complete all as specified and as directed. |
| 97 | Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified. |
| 98 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. |
| 99 | Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified. |
| 100 | M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item. Please Enable Macros to View BoQ information |
