|
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq m each with shutters (without taking off shutters from the frames), complete all as specified & directed. |
| 2 | Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified & directed. |
| 3 | S&F Pressed steel frame for doors of size 125 X 60 mm frabicated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed. |
| 4 | S&F Pressed steel frame for doors of size 105 X 60 mm fabricated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed. |
| 5 | S&F 30 mm thick, factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 6 | S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed. |
| 7 | M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed. |
| 8 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified & directed. |
| 9 | S & F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkkat of size 45x85 mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mmiter joints after applying PVC solvent cement and screwed with full dody threaded star headed SS screws having minimum density of 650 kg/cum nd screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixed in positin with suitable MS hold fast /lugs/SS dash fasteners f required dia and length complete, all as per direction of engr-in-charge complete all as directed |
| 10 | S & F Factory made single extruded WPC (wood polymer composite) solid moulded flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum nd screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , odulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixing with stainless steel butt hinges of required ie with necessary full body threaded star headed counter sunk SS screws, all as per direction of engr-in-charge complete all as directed |
| 11 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/cupboard Chowkhat of size 45 x 70 mm having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified & directed. |
| 12 | S&F 100 mm long galvinised mild steel hinge, type B-21, complete all as specified & directed. |
| 13 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified & directed. |
| 14 | S&F 150 mm long aluminium handles febricated type, complete all as specified & directed. |
| 15 | S&F 250 mm long aluminium alloy sliding door bolt , bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 16 | S&F aluminium anodised hasp and staple 100 mm long, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 17 | S&F Aluminium floor door stopper, 150 mm long, of aluminium alloy body and toungue, anodised with hard drawn steel spring fixed in floor,complete all as specified and directed. |
| 18 | S&F Powder coated (minimum thickness and powder coating 50 micron) aluminium frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 19 | M&L for Powder coated (minimum thickness and powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). stainless steel hinges type B-21 100mm long (2 no.) suitable handle (1 no. each), complete all as specified and as directed. |
| 20 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 21 | S & F for steel wire fabric welded steel wire fabric weight n.exc 4.0 kg/sqm fixed on to wood or steel members complete all as specified & directed. |
| 22 | S&F 4.8 mm thick Sheet glass, ordinary quality and glazing fixed to aluminium/ Steel/ wooden frame with rubber beading/ putty/ wooden beading as required area exc 0.5 sq. m in each pane complete all as specified and directed. |
| 23 | S&F 4 mm thick Figured glass, pin head type and glazing with rubber beading/ putty/ wooden beading as required in squares n exc 0.5 sq. m in each pane fixed with ventilator shuttter complete all as specified & directed. |
| 24 | M&L for anti termite treatment of the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, through approved applicator, as per manufcturer's instruction, complete all as specified and directed. |
| 25 | M&L for anti termite treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, through approved applicator, as per manufcturer's instruction, complete all as specified and directed. |
| 26 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes. |
| 27 | M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete, all as specified and as directed. |
| 28 | M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed plaster in cement mortar (1:4) complete all as specified & directed. |
| 29 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 018 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) all as specified and as directed by Engr -in-charge. |
| 30 | All as item no. above but as in skirting including 10mm thick rendering in CM 1:4 set and backing coat complete |
| 31 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar including removing rubbish out of the MoD land, complete all as specified & directed. |
| 32 | M&L for 18-20 mm thick Green marble (of any type) work (table rubbed and polished) for shelves (veneering to wall) including 15mm thick plaster in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble, complete all as specified & directed. |
| 33 | Providing edging moulding to 18-20 mm th stone of counters etc including machine polishing to edge to give gloss finish complete all as specified & directed. |
| 34 | M&L for Machine cut kota stone slab as in flooring / steps of stair case flooring 20-25 mm thick over and including 15 mm thick screed bed in CM 1: 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed. |
| 35 | M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and including pillar laid over and including 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including making groove to curve skidness, rubbing and polishing complete all as specified & directed. |
| 36 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish out side of MoD land, complete all as specified & directed. |
| 37 | M&L for 75 mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate laid in panels not exc 3 m and providing grooves at corner finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels, complete all as specified & directed. |
| 38 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removing rubbish out of MoD land, complete all as specified & directed. |
| 39 | M&L for reinforced cement concret nominal mix, type B-1 1:2:4,(using 20 mm graded stone aggregate) as in slab supported on wall and shelves etc complete all as specified & directed. |
| 40 | M&L for MS TMT bars 10 mm dia and over, cut to length bent to shape required incl cranking bending ,spirally for hooping for column ,hooking ends and binding with and including MS wire annealed not less than 0.9mm dia, complete all as specified & directed. |
| 41 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified & directed. |
| 42 | Form work to edges of concrete flat, roof slabs ,concrete railings, breaks in floors and similar works not exceeding 100 mm wide for fair finished surfaces, complete all as specified & directed. |
| 43 | Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified & directed. |
| 44 | M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete, all as specified & directed. |
| 45 | Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 46 | M&L for rendering 15 mm thick on other than fair faces of brick work or stone masonry surfaces in cement plaster 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and fair on wall surfaces, complete, all as specified and directed . |
| 47 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 48 | M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair complete, all as specified and directed |
| 49 | M&L for rendering 10 mm thick on concrete surfaces in ceiling in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified & directed. |
| 50 | M & L for preparation of surface new/old plaster and applying two coats of 100% premium acrylic exterior emulsion paint over 1-1.5 mm thick wall care putty having VOC less than 50 gm/litre & excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied at 0.90 litre/10 Sqm over new surfaces upto tripple storey with fully utomatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per min having pressure 3300 PSI. Allow 6-8 hours to dry the surface of both coat of paint to achieve excellent application with 5 years perfomance warranty from manufacturers and instruction complete using limited man power including scaffolding, trestles, ladders, cradles and necessary safety measures for upto triple storey buildings, complete all as specified and directed.Make : Asian Paints Apex , Berger, Dulux or equivalent brand)Note : (a) Complete work to be executed by authorised applicator from paint manufacturer. (b) Primer and emulsion application to be carried out through air less spray machine or by roller (only mechanical application allowed except in paint application on bands/chajja & building edges/ borders/projections where contrasting colour as specified and directed is to be applied) |
| 51 | M & L for applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on newly plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 52 | M&L for preparation of old surfaces of wall including complete removal of existing treatment brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying two coat of oil bound distemper over 2 mm thick wall care putty all as specified. |
| 53 | M&L for applying three coats of white wash on newly plastered wall surface complete all as specified and directed. |
| 54 | M&L for three coats of white wash on ceiling including preparation of new plastered surfaces, complete all as specified and as directed. |
| 55 | M&L for one coat of white wash including preparation of old surfaces as on ceilings all as specified and as directed. |
| 56 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed. |
| 57 | M&L for applying a coat of synthetic enamel paint on old painted steel surfaces of any description not other wise describe, over 10cm width or girth complete all as specified & directed. |
| 58 | M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 59 | Demolition of cement concrete (unreinforced) of any description and including of existing water profing treatment from sunken portion of WC /Bath /Kitchen / Passage including taking out plaster, lime/cement concrete, WC trap complete empty of existing sunk and removing rubbish out side of MoD land, complete all as directed |
| 60 | M&L for 10 mm thick polymer modified plaster in CM 1:4 mixing the polymer in the ratio of 1:10 (1 part of polymer & 10 parts of cement) for sides and base of sunken floor portion complete all as specified & directed. |
| 61 | M&L for Cement concrete 1:5:10 type E2 using 40mm graded stone aggregate for filling in sunken part of slab complete all as specified & directed. |
| 62 | S&F in repair of GI tubes medium grade, laid on sunken floor as in spout pipe 32 mm bore complete all as specified and directed. |
| 63 | Demolition of roof treatment any thickness including PCC , Mud phuska PCC padding, plastering , APP membrane complete treatment and in any position and removing the demolished material out of MoD land complete all as specified and directed. |
| 64 | M&L for 40 mm average thick PCC 1:2:4 type B0 (using 12.5mm grd stone agg) in floors/padding for levelling of roof surface and finishing the surface even and fair with out using extra cement, complete, all as specified and directed. |
| 65 | M&L for APP based polymeric membrane not less than 3 mm thick, weighing not less then 3 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm). It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet in a groove and same shall be flashed by membrane flashing. Complete APP membrane (in roof/parapet surfaces) shall be laid over and including a coat of cold applied bituminous primer confirming to IS:3384 @ 0.40 Kg per Sqm, complete all as specified & directed. |
| 66 | M&L for cool roof SRI (Solar Reflective Index) tiles of 300 X 300 mm, 9/10 mm thick of approved Make of colour as approved by GE over and including 15 mm thick screed bed in CM 1:4, joints grouted and 5mm spacer and filled by pointed in CM (1:3) mixed with 5% crude oil by weight of cement. The tiles shall be laid either through authorised applicator who has laid the app memberane or by the contractor under the supervision of the authorised applicator of APP membrane. |
| 67 | Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed. |
| 68 | Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed. |
| 69 | Supplying and laying of 20 mm CPVC pipes outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 70 | S & F 20 mm bore of pipe GI medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. complete all as specified and as directed. |
| 71 | Taking down rainwater/sewage pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified & directed. |
| 72 | S&F in repair 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as directed and as specified. |
| 73 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc. including demolition of old pipes complete all as directed and as specified. |
| 74 | S&F in repair 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as directed and as specified. |
| 75 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc. including demolition of pipes complete all as directed and as specified. |
| 76 | S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as directed and as specified. |
| 77 | S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as directed and as specified. |
| 78 | S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directed and as specified.. |
| 79 | S&F Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 75/100mm bore pipe complete all as directed and as specified. |
| 80 | S&F in repair 75mm PVC floor trap plain with CP grating including jointing with solvent cement complete all as directed and as specified. |
| 81 | S&F 110 mm bore PVC vent cowl, complete all as specified and directed. |
| 82 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P' trap setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe & jointing to socket of flushing rim, complete all as specified and directed. |
| 83 | S&F in repair for vitreous china wash hand basin white flat back size 550 x 400 mm including CP waste coupling, PVC waste pipe, bracket including cutting for and pinning in ends of bracket or eracting stand, complete all as specified and directed. |
| 84 | S&F in repair for (600 x 450) mm looking mirror beveled edge, selected quality glass mounted on 6mm thick AC building board or commercial ply wood, having aluminum beading all around the frame and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 85 | S&F in repairs wall mixer head and hand arangment combination pattern including work connecting legs wall flanges etc complete all as specified and as directed. |
| 86 | S&F in repair bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed. |
| 87 | S&F in repair Stop Valve/ angular cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed. |
| 88 | S&F in repair cast copper alloy chromium plated over head shower (150 x 150 mm) square shape with 600 mm long arm complete complete all as specified and as directed. |
| 89 | S&F in repair Pillar taps, (Min wt - 500 gm), fancy type, long body, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed. |
| 90 | S&f in repair Soap dish, of CP brass body and rectangular in shap fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 91 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard & railing 60cm long complete all as specified and as directed. |
| 92 | S&F in repair corner glass shelf (set of 2.0) with stainless steel bracket fixed to wall complete all as specified and as directed. |
| 93 | S&F in repair aluminium anodished plated tubular towel rail 20 mm dia type 'D', 600mm long between flanges fixed to wall complete all as specified. |
| 94 | S&F in repair curtain rod stainless steel chromium plated 25 mm dia with bracket knobs including end cap complete all as specified and directed. |
| 95 | Supply & fixing PVC connection 15mm size best quality with PTMT nuts 450mm long. |
| 96 | S&F in repairs Stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen with plugs washers and incl fixing CI cantilever brackets ,waste etc complete and making good to the side of wall,connecting union to pipe, Overall size 915mmx460mm and bowl size 410x330x160mm including waste pipe, complete all as specified |
| 97 | Supply and laying 80mm thick factory made chamfered edge cement concrete interlocking paver block of M-30 grade locally availabe best quality as approved by GE confirming to IS 15658-2006 with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over minimum 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;. |
| 98 | M & L for 40 mm waste fittings, brass, chromium plated for sinks, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as directed. |
| 99 | Dismantling old water tanks exc 500 & n exc 1000ltrs capacity and removing all as directed |
| 100 | S&F 750 Litre capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), WHITE COLOUR, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & wash out pipe etc including required dia of GI pipe, complete as specified in SSR Part-I. |
| 101 | S&F in repair Gun metal, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified |
| 102 | S&F 20 mm bore ball brass valve high pressure with brass rod Polythene float and fly nut complete screwed for iron pipe and fixed all as specified & directed. |
| 103 | S&F 18mm thick WPC board in cupboard shutter/kitchen cabinet with decorative laminated on one side & other side balancing white, fixed with necessary stainless steel drilling screws/Anchoring bolt along with modular handles, design and colour as approved by GE including dismantling of boards any type, complete all as specified and directed. Make: Rajshri/ GIZA/ Black Cobra |
| 104 | S&F 18 mm thick WPC board in cupboard shutter/kitchen cabinet with both side balancing white fixed with necessary stainless steel drilling screws/Anchoring bolt along with modular handles, design and colour as approved by GE including dismantling of boards any type, complete all as specified and directed. Make: Rajshri / GIZA/ Black Cobra |
| 105 | S&F Continuous (piano) hinges width of flaps 30 mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 106 | S&F 0 degree clip type self closing hinges for cabinets fixed with cadimum coated screws all as per sample. |
| 107 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple. |
| 108 | S & F stainless steel handles 100 mm size for kitchen cabinet, cupboard shutters, pattern/design as approved by GE. |
| 109 | S&F stainless steel kitchen plate rack overall minimum size 750mm X 600mmX250mm made out of 2mm thick stainless steel wire etc. complete all as specified and directed |
| 110 | Dismentling timber scantlings 40 sq cm and over in section, in any position |
| 111 | M&L for roof trusses (Framed) tubular truss, crane gantries, rails and fastenings and heavy brackets framing (Hollow tubular section, beam, tee, angle, channel or flat section) FE-290 Gd-165 including distance pieces, cleats etc complete all as specified and directed |
| 112 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa and AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 113 | M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge. |
| 114 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as specified and directed by Engr-In-Charge. |
| 115 | Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed.( Note: Credit for above items should be made as per credit Schedule separately) |
| 116 | Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge. |
| 117 | Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap incl all type of MCB and making good disturbed surface / wall as per existing complete all as specified and directed |
| 118 | M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) for mounting modular switches, socket, regulator etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified and directed for the floowing item from119-123 :- |
| 119 | a) One light/ fan/ exhaust fan point controlled by one way switch 5 amp complete. |
| 120 | b) One 3 pin 5 Amps socket point controlled by one way switch on same board. |
| 121 | c) One 3 pin 5 Amps socket point controlled by one way switch on independent board. |
| 122 | d) One bell point controlled by one push button on independent board. |
| 123 | (e ) One two way light point controlled by two way switch |
| 124 | All as per item No. 118 here in before but for one 3 pin / 5 pin 6/16 Amps sockets outlet with 2.5 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed . |
| 125 | Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified. |
| 126 | Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified. |
| 127 | Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified. |
| 128 | Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified. |
| 129 | Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified. |
| 130 | Supply and fix Modular Bell push 6A , 1 module |
| 131 | Supply and Fixing Modular switch 2 way 6 A , 1 Module complete all as specified and as directed. |
| 132 | Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified. |
| 133 | Supply and fixing lamp holder (Angle), PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified. |
| 134 | S/F Modular White cover plate with frame,1 module |
| 135 | S/F Modular White cover plate with frame,2 module |
| 136 | S/F Modular White cover plate with frame,3 module |
| 137 | S/F Modular White cover plate with frame,8 module |
| 138 | S/F Modular Metal flush box 1/2 module |
| 139 | S/F Modular Metal flush box 3 module |
| 140 | S/F Modular Metal flush box 8 module |
| 141 | Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. |
| 142 | Supply and fix LED T-5 Intergrated Batten PC housing extruded 2' light fittings 9W complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. |
| 143 | Supply and fix LED retrofit lamp 9 Watt. |
| 144 | S&F Decorative wall light fitting stainless steel rust free fixture with white glass diffuser with 7.5/ 9W LED lamp complete all as specified and directed Make Havells /bajaj/philips |
| 145 | Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified. |
| 146 | M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description. |
| 147 | Taking down the Ceiling/ Exhuast fan of any sweep carefully from its installed position, dismantling complete with down rod ,cleaning of all dust, applying grease for bearings, reassembling the fan and blades, keeping a side safely and hanging / refixing in position after spray ainting and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed. |
| 148 | M & L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM). |
| 149 | S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified. |
| 150 | Supply & fix in replacement of MCB DP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed. |
| 151 | Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' B' series ,bracking cap 10KA, 240V complete all as specified and directed. |
| 152 | Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 25 Sqmm 4 core laid in trenches / duct / fixing on walls / poles including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. |
| 153 | Supply,installation,commissioning and testing of LT Indoor type floor mounted panel board (factory made of approved CPRI) made out of CRCA sheet 3.15mm thickness for outer sheet and 2mm thicness for inner sheet dust proof, powder coated from both side, individual door, factory locking system with two side ventilation suitable for working on 415 volt AC supply including bus bar chamber and water proof duly supported on 40 x 40 x 6 mm angle iron frame,opening arrangement from front & rear both duly fitted with compression cable glands for entry & exit of cables having minimun clearance of 450 mm above floor level complete comprising of the following : - (a)Panel mounted Multi-function for voltage, current, frequency, power factor and power Type EM-VIFP -01 set (b) Al bus bar --- 03 Nos. For phase of capacity 200 Amp and 1 Nos 200 Amps for neutral, duly taped in colour coded FRP sleeves. (c) LED Indicating lamps Red, Yellow and blue complete with lamp holders, 220 volts AC.- 01 Set of 3 (d) Panel wiring with 2.5 Sqmm PVC Sheathed, PVC insulated FR-HR stranded copper conductor cable through MCB DP 10 A mounted on DIN rail. (e) 4 Pole MCCB 125 Amp, (Ics=100%Icu) 415 V , 26 KA - 01 No (Incommer) (f ) 2 Pole MCB DP 40-63 Amps, 220 V , 10 KA - 09 Nos (Outgoing) (g ) Provision for mounting of 08-109 Pre-paid meter |
| 154 | Taking out the electric geyser of capacity 25 Ltrs Ltrs carefully from its installed position by disconneting inlet and outlet water pipes, dismantling the unit and replacing the defective Parts and painting with one coat of synthetic enamel paint and witing MES No.and safely keeping a side & refixing in its original position after completion of civil work and reconnecting the inlet/outlet water pipes and testing on completion complete all as directed by Engineer-in-Charge. NOTE:- The spare parts required shall be measured and paid separately under relevant items. |
| 155 | Supply only the following item no 156-158, suitable for electric geyser of capacity 25:- |
| 156 | a) Heating element 1.5 / 2 KW ISI marked including rubber Gasket as per existing type. |
| 157 | b) Thermostat suitable for 25 Ltrs Geyser (as per the existing type). |
| 158 | c) Hot water / cold water pipe 600mm long as per existing type |
| 159 | Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer)(iii) 4 mm GI wire from earth plate to MCB DB/machinery incl necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit.(v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire.(vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit.(vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover.(viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed. Please Enable Macros to View BoQ information |
