Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime or grid finish plaster, of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed. |
| 3 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 as in ceiling complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth (without using extra cement) complete all as specified and directed. (WPC measured and paid seperately) |
| 5 | Supply only integral waterproofing compound. |
| 6 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 7 | M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in :6 cement mortar complete all as specified & directed. |
| 8 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 cement mortar complete all as specified & directed. |
| 9 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and fair & smooth without using extra cement complete all as specified and directed. |
| 10 | M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’ |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 12 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed. |
| 13 | M&L for Cement Concrete Type C-2, 1:3:6 (using 40 mm graded brick coarse aggregate) as in sub abse,sunken floors, filling & mass concrete complete all as specified & directed. |
| 14 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 15 | All as per item No 14 here-in-before as in skirting/dado & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed |
| 16 | M&L for Vitrified tile flooring 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 17 | All as per item No 16 here-in-before as in skirting/dado & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed |
| 18 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 19 | M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 20 | Demolition of stone slabs and tiles of any escription or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as directed. |
| 21 | M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick n steps, jambs, pillars, window-cills, wash basin, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite bedded and jointed with grey cement slurry and pointed to match the shade of granite stone grinding and polishing types including screed bed 15 mm thick in CM 1 : 6 Complete all as specified and directed. |
| 22 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform & other similar situations complete all as specified and directed. |
| 23 | M&L for Machine cut Kota stone slab flooring 18-20 mm thick over & including 20 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 24 | M&L for Machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado & pillar over & including rendering 10 mm thick in 1:4 cement mortar, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 25 | Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed. |
| 26 | Taking down Chowkhats or frames exc. 1.50 sqm but not exc. 4 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed. |
| 27 | Taking down shutter of any decrti on not exe 1 sqm complete as specifed and directed |
| 28 | Taking down shutter of any decrti on exe 1 sqm but nexc 2 sqm complete as specifed and directed |
| 29 | Taking down shutters exc 1 sqm but not exceeding 2.0 Sqm easying, adjusting and refixing in same opening |
| 30 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door frame of size45 x 85mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC slovent cement and screwed with full body threaded star headed SS screws havng minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticty 900 N/mm2 and resistance to spread of flame of Casss A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed (M.S hold fast/lugs or SS dash fasteners shall be paid for seperately. Note : For WPC solid door minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 32 | Factory made single extruded WPC (Wood Polymer Composite) solid door frame of size 125 x 65mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC slovent cement and screwed with full body threaded star headed SS screws havng minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticty 900 N/mm2 and resistance to spread of flame of Casss A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed (M.S hold fast/lugs or SS dash fasteners shall be paid for seperately. Note : For WPC solid door minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm thick decorative type comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modules of elasticty 850 N/mm2 and resistance to spread of flame of Casss A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessay full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note : stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 34 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid plain skeleton door shutter of 35 mm thick decorative type comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength of 50 N/mm2, modules of elasticty 850 N/mm2 and resistance to spread of flame of Casss A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessay full body threaded star headed counter sunk S.S screws including and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads complete all as specified and directed. Note : stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 35 | S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing. |
| 36 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 37 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 38 | S&F mild steel flat iron as in bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed. |
| 39 | S&F in repair, 18/19 mm thick, high density PVC/WPC solid fibre board with both side prelaminated PVC sheet as Kitchen cabinet and cupboard/wardrobe shutter and frame and inside shelves and side walls all as specified and directed. |
| 40 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE ) as in Kitchen cabinet and cupboard (withshelves and partitions) including necessary fitting & fixture as per manuacturer's instructions complete all as specified & directed.ncluding tanking down of existing shutters complete complete all as specified & directed. |
| 41 | S & F Sheet glass 4.8 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 42 | S&F in repair 3 mm figured glass, pin head type and glazing with beads fixed with m in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 43 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 44 | S & F in repairs Sheet glass 4.8 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane. |
| 45 | S & F in repairs Sheet glass 4.8 mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane. |
| 46 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed by Engr-in-charge. |
| 47 | M & L,in repair Anodised aluminium grill (Anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern ,with approved standared section and fixed to the existing window frame with C P Brass/stainless steel screws @200 mm centre to centre ,including cutting the grill to proper openīng size for fixing and operation of handle and fixing approved anodised alumininum standard section around the opening ,all complete as per requirement and direction of Engineer-in-charge. |
| 48 | S&F in repair , Aluminium anodised sections with powder coating for doors/windows/ventilators with one or more rebates and rubber packing and roller including joining cleat for fixing etc complete with frames, shutters sliding three track, or fixed or ventlators including handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately. .incl taking down of shutter |
| 49 | M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded aggregate including necessary formwork. |
| 50 | Forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete New work built in CM(1:4) or cement lime mortar (1:2:9) |
| 51 | S&F Butt hinges medium weight cold rolled Aluminium anodised 100mm long complete. |
| 52 | S&F Butt hinges medium weight cold rolled Aluminium anodised 75 mm long complete. |
| 53 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete, |
| 54 | S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete, |
| 55 | S&F Aluminium handles cast type anodised of 150mm complete. |
| 56 | S&F Aluminium handles cast type anodised of 100mm complete. |
| 57 | S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified. |
| 58 | S & F in repair helical Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete. |
| 59 | S&F 40 mm Width of flaps (when open) in mm Continuous (piano) hinges,mild steel, bright finish or elec trogalvanised |
| 60 | S&F Hasp and staple,aluminium anodised , wire type, stove enamelledblack, including bolt to hinge plate and fixed with screw Size of hasp and staple in 150 mm complete |
| 61 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 62 | S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 63 | M & L for ATT Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 64 | M & L for ATT treatment to the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface. |
| 65 | S&F in repairs 25 mm dia stainless steel curtain rod chromium plated including fancy type brackets fixing with fixing fancy type bracket stops rollers etc complete all as specified and directed. |
| 66 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 67 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over a coat of primer over a coat of 1-2mm thick birla wall care putty complete all as specified and directed. |
| 68 | M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of primer over a coat of 1-2mm thick birla wall care putty complete all as specified and directed. |
| 69 | M&L for preparation of new decorative surfaces of wall of walls including, cornices (plastered or unplastered) of any description, rubbing, scrapping by hand held sander / long handle sander and Jet pressure washing and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint (Apex -Ultima Protek) of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including filing undulations with white cement based putty mixed with multi purpose mixer complete all as directed. |
| 70 | M&L for applying two coat of oil bound distemper over & including one coat of alkali resistant priming paint on newly prepared plastered ceiling surfaces complete all as specified and directed. |
| 71 | M&L for preparation of old surfaces of any description and applying two coats of oil bound distemper over prepared ceiling on old decorated surfaces including filling cracks and holes etc complete all as speciifed and directed. |
| 72 | M&L for preparation of newly plastered or unplastered surfaces of ceiling and apply three coat of white wash on prepared ceiling surface.Complete all as specified and directed. |
| 73 | M&L for preparation of old painted ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 74 | M&L for preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 75 | Taking down steel tubing and connections incl cleaning for refixing or removal form site for 20mm bore pipe all as specified and directed by Engr-in-charge. |
| 76 | Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. ® |
| 77 | S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. |
| 78 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exc 4 kg/sqm complete all as sepecifed |
| 79 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed. |
| 80 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank complete all as specified and directed. |
| 81 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank complete all as specified and directed. |
| 82 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 83 | S&F in repair, Brass chromium plated Wall Mixer 3-in-1 System with provision for both Hand Shower & Overhead Shower complete with 115 mm long bend pipe, connecting legs & wall flanges (without Hand & Over Head Shower) for 15 mm bore of pipe complete all as specified and directed. |
| 84 | S&F in repair, Chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed cERA Cat Part No F8040204 or equivalent |
| 85 | S&F in repair, Chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed.CERA Cat Part No F2002211 or equivalent |
| 86 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 87 | S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete in all respect as specified. |
| 88 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 89 | S&F in repair, plastic water closet seat cover, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 90 | S&F in repair, 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 91 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 92 | S&F in repair, Brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed cERA Cat Part No F2002461 or quivalent |
| 93 | S&F in repair, Brass chromium plated Sink Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed cERA Cat Part No F2008501 or quivalent |
| 94 | S&F in repair, Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 95 | S&F in repair, 1 mm thick, Stainless Steel Plate Rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed. |
| 96 | S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed. |
| 97 | S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed. |
| 98 | S&F in repair, Corner Glass Shelf with brackets complete all as specified and directed. |
| 99 | S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 100 | S&F in repair, Toilet paper holder with flat recessed type stainless steel complete all as specified & directed. |
| 101 | S&F in repair, Door Seal with aluminium beading and 50 mm wide rubber seal, fixed to Aluminium/Wooden doors complete all as specified and directed. |
| 102 | S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm, with hard drawn steel spring, fixed in door complete all as specified and directed. |
| 103 | S&F in repair, 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified and directed. |
| 104 | S&F in repair, 125 mm size, Brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 105 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. Make:- Symet/ Prayag |
| 106 | S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc complete all as specified and directed. |
| 107 | S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 108 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 109 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 110 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 111 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 112 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 113 | S&F in repair, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 114 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 115 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 116 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 117 | S&F 75 mm bore PVC (SWR) junction single, (Single T or Y) equal or unequal complete all as specified and directed. |
| 118 | S&F in repair, 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 119 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 120 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed. |
| 121 | S&F PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed |
| 122 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 123 | S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge. |
| 124 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 125 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 126 | M&L for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) as in flooring all as specified and directed. |
| 127 | M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete |
| 128 | (i) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 with WPC Compound complete. Note : WPC Paid seperitaly |
| 129 | (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm |
| 130 | (iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. |
| 131 | (iv) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified 100 mm over laps shall be sealed by flame as per manufacturers instruction. |
| 132 | (v) M& L for new APP polymeric membrane surfaces and applying with two coats solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete |
| 133 | M&L for fillet of 75mm size using PCC 1:2:4 type B-1 (using 20 mm graded aggregate) at the junction of all horizontal and vertical surfaces complete all as specified and directed. |
| 134 | M&L for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course, to match the undulations of roof/ chajjah padding complete all as specified and directed. |
| 135 | M&L for Cement concrete tiles 25 cm x 25 cm x 22 mm thick, machine pressed including provision of 15 mm thick screed bed in CM 1:4 with using water proofing compound complete all as specified and directed. |
| 136 | S&F factory made rubber moulded glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 137 | Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all specified and directed. |
| 138 | S&F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 139 | M&L Precast cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:6 |
| 140 | S&F in repair 15mm bore bib tap fancy type chromium plate alloy with a crutch or butterfly handle screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-charge. |
| 141 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. |
| 142 | Taking down carefully any type of old unserviceable submain wiring with PVC/steel conduit surface / concealed or wooden battens etc and making good the disturbed surfaces to match with the existing surface complete all as specified & directed by Engineer-in-Charge. |
| 143 | Taking down carefully any type of DBs including MCCBs and MCBs for keeping the old materials into safe custody or for taking credit(credit for above items should be made as per condition seaparately) and making godd to the disturbed surface etc complete all as specified and directed. |
| 144 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for One light point controlled by one switch 5/6 Amps. |
| 145 | ditto as per item No. 144 but for one Ceiling fan/Exhaust fan Point controlled by one switch 5/6 Amps. |
| 146 | ditto as per item No. 144 but for one Bell/buzzer Point controlled by one push button switch 5/6 Amps . |
| 147 | ditto as per item No. 144 but for one socket point 5/6 Amp controlled by one switch on same board. |
| 148 | ditto as per item No. 144 but for one socket point 5/6 Amp controlled by one switch on Independent board. |
| 149 | ditto as per item No. 144 but for one light point controlled by two way switch. |
| 150 | Description same all as per item No. 144 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 1.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge. |
| 151 | Description same all as per item No. 144 here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 4 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board complete all as specified & directed by Engineer-in-Charge. |
| 152 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 6.0 sqmm conductor for main and one run of 6.0 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 153 | S&F call bell multi music type suitable for AC 230 volt single pole complete all as specified & directed. |
| 154 | S &F Lamp holder, PVC/ polycarbonate type with back plate for angle holder all as per specified and directed. |
| 155 | S&F Ceiling rose surface type 60 x 30 mm three terminals of polycarbonate body complete all as specified & directed. |
| 156 | S&F modular switch one way 6 Amps one module 230 volts AC complete all as specified and as directed. |
| 157 | S&F modular switch one way 16 Amps one module 230 volts AC complete all as specified and as directed |
| 158 | S&F modular socket, 6A -2/3 pin combined 2 module,230 volts AC complete all as specified and as directed. |
| 159 | S&F modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed . |
| 160 | S&F modular bell push , 6 Amps, 1 module complete all as specified and as directed. |
| 161 | S&F modular switch two way AC 230 volts 6 Amps ,1 module complete all as specified and directed. |
| 162 | S&F modular fan regulator, 2 Module 4 step upto 120 W heavy duty 230 volts complete all as specified and as directed. |
| 163 | S&F modular cover plate 1 module including screws and washers etc complete all as specified and as directed. |
| 164 | S&F modular cover plate 2 module including screws and washers etc complete all as specified and as directed. |
| 165 | S&F modular cover plate 3 module including screws and washers etc complete all as specified and as directed. |
| 166 | S&F modular cover plate 8 module including screws and washers etc complete all as specified and as directed. |
| 167 | S&F modular cover plate 12 module including screws and washers etc complete all as specified and as directed. |
| 168 | S & F Metal flush box 1/2 module complete all as specified and directed. |
| 169 | Ditto as per item No. 168 but 3 module complete all as specified and directed |
| 170 | Ditto as per item No. 168 but 8 module complete all as specified and directed |
| 171 | Ditto as per item No. 168 but 12 module complete all as specified and directed |
| 172 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral,240 Volt with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\\"S/lsolators including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engr-in-Charge. (Note : MCBs will be Measured separately) |
| 173 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 174 | Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 175 | Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 20 watt min 100 LM/watt, natural white(4000K)/ cool white (6500k), with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall/ceiling mounting fixed with 02 Nos of PVC round/ square blocks, screws etc(supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification. |
| 176 | Supply and fix in replacement of LED bulk head luminaires,9 watts (600-900 lumens) lamp with fittings, connecting cable PVC insulated and PVC sheathed copper flxible cable with suitable size up to ceiling rose and necessary fixing arrangments complete all as directed. |
| 177 | S&F IP 20, Class I, LED Mirror light fitting10 W, (or nearest next higher wattage) wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size etc complete all as specified. |
| 178 | Supply & fix in replacement of LED Security Light Luminaire 35 watt with 2500 or more lumen warm white/cool day ligh with, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole/wall fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. |
| 179 | S&F in replacement of LED Bulb 5 star rating 230V AC 12 watt warm/cool day light 6500K as per the direction/requirement of site complere all as specified and directed by Engineer-in -charge. |
| 180 | S&F decorative wall light fitting made up of Polycarbonate ,Cylindrical shape or as per the sample required/obtained from the site and mounting arrangement to fix the lamp and all as directed by Engr-in-Charge with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. |
| 181 | Taking down ceiling /exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge |
| 182 | Hanging only ceiling fan and connecting up including provision of flexible cable from ceiling rose or connector to fan Including hook and clamps with nut ,bolts, washers etc complete all as specified and directed |
| 183 | Fixing only exhaust fan and connecting up including provision of flexible cable from ceiling rose or connector to fan Including nut ,bolts, washers etc complete all as specified and directed |
| 184 | M & L for painting of ceilling fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting , complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as spedified and directed. |
| 185 | Takinng down geyser capacity 25/50 ltr and Re-Fixing of geyser capacity 25/50 ltr with complete fittings such as cold and hot water connection pipes,suitable thread size nut bolts-02 Nos and accessories complete all as specified by Engr in charge |
| 186 | M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 187 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate with angle iron CI frame 40X40X5mm , CI cover with provision of locking arrangement complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge. including necessary excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- (i) Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor (ii) If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt. |
| 188 | Schedule of credit amount of Rs. 2,06,941.90 to be deducted during AOC Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
