Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified. |
| 2 | Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 4 | Demolition of cement concrete of any description not other wise specified and provided etc complete |
| 5 | M&L for Plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, in flooring path, sub foundation etc, complete all as specified and as directed . |
| 6 | M&L for 25mm thick Plain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings complete all as specified and directed. |
| 7 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including over 15 mm thick screed bed or bedding layer in CM (1:6) for laying in floors finishing complete all as specified and directed. |
| 8 | All as per item No. 10 specified here-in-above, but on vertical surfaces such as skirting, dado or risers to steps etc over 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 9 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layer in CM 1:6 for laying in floors finishing ,complete all as specified and directed. |
| 10 | M&L for glazed coloured ceramic tiles (premium quality) of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 11 | Taking down existing cement plaster on brick or stone walls, ceilings etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 12 | M&L for rendering 15mm thick in CM 1:4 on stone masonry surfaces using integral water proofing compound all as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for rendering 10mm thick on concrete surfaces in CM 1:3 and finished even and smooth in ceilings without using extra cement complete all as specified and directed. |
| 14 | M&L for rendering 15mm thick in CM 1: 6 on stone masonary surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of walls and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces of ceilings and applying two coat of Oil Bound distemper over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 18 | M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified and as directed. |
| 19 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 20 | Taking down Chowkats or frames exceeding 1.5 Sqm each and not exceeding 4.0 Sqm each (Without taking off shutters from the frames) complete all as specified and directed. |
| 21 | M&L for PCC (1:2:4) type B0 using 12.5mm aggregate for filling in pressed steel frame, concrete shall be compressed all as specified and directed. |
| 22 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, size of frame 165 x 60 mm complete all as specified and directed. |
| 23 | M&L factory Made flush shutters, 40 mm thick solid core with block board core construction as per IS 2202(part-I, 1999), both side decorative type lamination. The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed. |
| 24 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 25 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 26 | M&L preparation of steel and steel base surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coate of red oxide primer complete all as specified and directed. |
| 27 | S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with aluminium section weighing 0.55Kg/m with one or more rebates or for sliding windows (2 track / 3 track), ventilators with louvers having suitable mechanism for tilting, U shaped fillets etc complete all as specified and directed. |
| 28 | S&F powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 tower bolts, 1 mortice lock of vertical type brass 4 levers size 65mm and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 29 | S&F pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators complete all as specified and directed. |
| 30 | S&F powder coated anodised aluminium window shutters prepared for sliding or hanging or fixed type etc with aluminium sections weighing minimum 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws and also including handles, tower bolts, locks and hinges etc complete all as specified and directed. |
| 31 | S&F 12mm toughened glass as in hinged doors, partition automatic doors and similar work including design etching work/sun control film including cutting to shape, drilling holes required and including all necessary fittings and floor spring hinge complete all as specified and directed. |
| 32 | S&F Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 33 | S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed. |
| 34 | S&F 100 mm long medium weight, cold rolled Stainless steel Butt hinges complete all as specified and directed. |
| 35 | S&F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm complete all as specified and directed. |
| 36 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 37 | S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 38 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 39 | S&F in repairs 15 mm bore long body bib cock with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 40 | S&F 15 mm bore two way bib tap with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 41 | S&F in repair 15mm bore fancy type chromium plated shower rose 125mm dia with arm with or without swivel joint complete all as specified and directed. |
| 42 | S&F in repairs concealed stop valve with wall flange 20 mm bore, brass chromium plated, long thread, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane or as in louvers of ventilators complete all as specified as directed. |
| 44 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 45 | S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm with necessary fitting on steel / wooden surface complete all as specified and directed. |
| 46 | S&F decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets (trade pattern) fixed to walls complete with two nos decorative stainless steel knobs (fincals round type with mirror optic finish) at each end , sample as approved by GE, complete all as specified and as directed |
| 47 | S&F in repairs vitreous China wash down water closet pan European type pedestal pattern, white with seat and cover and jet pray including PVC 'P' or 'S' trap, flush HDPE pipe of 32 mm dia complete all as specified and as directed. |
| 48 | S&F in repairs Vitreous China Squatting pan of Orrisa pattern, long pan, size 580mm x 440mm white with `P' or `S' trap, front or back inlet and integral foot rests any pattern including connection to trap and to flushing pipe of 40mm dia and provision of cement concrete bedding and making good to floor complete all as specified and directed. |
| 49 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore acomplete all as specified and directed. |
| 50 | All as per item No. 49 specified here-in-above, but 75mm bore complete all as specified and directed. |
| 51 | Supply & laying 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed . |
| 52 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and as directed . |
| 53 | Supply & laying 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches of suitable size complete all as specified and as directed . |
| 54 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and as directed . |
| 55 | S&F of 110 mm bore (SWR) PVC bends any radius, complete all as specified and directed. |
| 56 | S&F 110mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 57 | S&F 110mm bore PVC [SWR] branch piece, double (double Y) equal or unequal complete all as specified and as directed. |
| 58 | S&F of 75 mm bore (SWR) PVC bends any radius with access door, complete all as specified and directed. |
| 59 | S&F 75mm bore PVC [SWR] branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 60 | S&F 75mm bore PVC [SWR] branch piece, double (double Y) equal or unequal complete all as specified and as directed. |
| 61 | S&F of PVC (SWR) floor trap plain with grating including jointing with solvent cement dia of outlet 75mm, complete all as specified and directed. |
| 62 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified |
| 63 | M&L 75mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as directed |
| 64 | S&F in repairs 25mm bore stop valve, cast copper alloy with screwed down high pressure with crutch or butterfly handle both ends screwed for iron pipe or for union & fixed of 25mm dia complete all as specified and directed. |
| 65 | S&F in repairs angle stop valve with wall flange 15 mm bore of pipe, brass chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 66 | S&F 15mm bore two way angular stop cock with wall flange, chromium plated brass, fancy type complete all as specified and directed. |
| 67 | S&F CP Hand Shower (Health Faucet) with 8mm dia, 1.2 Mtr long flexible tube & wall hook with N.R.V (Back flow preventer), 15 mm dia complete all as specified and directed. |
| 68 | S&Fof 10 ltrs capacity PVC valve less, ISI Marked syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection, cistern colour shall be match WC colour, complete all as specified and as directed. |
| 69 | S&F in repairs rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylindrically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including taking down the existing tank of capacity not exceeding 1000 ltr and removing from the site complete all as specified and as directed. |
| 70 | All as per item No.69 here in before but 500 Ltr capacity water tank |
| 71 | S&F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 72 | S&F gun metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 73 | S&F gun metal, globe or gate valves 15 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 74 | Supply only integral water proofing compound complete all as specified and as directed. |
| 75 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 76 | All as per item No.75 here in before but 20mm outer dia pipes. |
| 77 | All as per item No.75 here in before but 15mm outer dia pipes. |
| 78 | Supply & laying of 20 mm dia CPVC pipe SDR 11 and with plain CPVC SDR 11 fittings such as bends, elbows, unions and end pieces to receive the fittings, concealed in walls/ceiling or lay in floors and fixed with solvent including cutting chases, pinning in & making good disturbed portion complete all as specified and as directed. |
| 79 | All as per item No.78 here in before but 16mm outer dia pipes including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete. |
| 80 | S&F GI water tubing of 25 mm dia ,medium grade conforming to IS-1239 (Part-1) including all fittings such as bends, tees, short pieces, connectors, elbows ,reducers, union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed by Engr-in-charge. |
| 81 | All as per item No.80 here in before but 20mm dia pipes. |
| 82 | All as per item No.80 here in before but 15mm dia pipes including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete. |
| 83 | M&L for 50 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement, including expansion joint every 3m and change in direction and joint filled with sealing compound Grade A complete all as specified and directed. |
| 84 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for roof padding/roof kerb etc including dismantling of existing membrane and cement mortar and removal of debris outside MoD land complete all as specified and directed. |
| 85 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) as in roof padding over cleaned surfaces of roof for making good any depression/undulation and to obtain desired slopes complete all as specified and directed. |
| 86 | M&L for rendering 20mm thick in cement mortar (1:4), mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed. |
| 87 | M&L for carrying out water proofing treatment for roofs in the following stages - (i) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must, complete all as specified and as directed.Note : - (i) The work shall be executed by the authorized applicator of the manufacturer only.(ii) The authorized applicator of manufacturer shall be approved by GE. (iii)The color of final finish shall be decided by the GE(iv)WPC shall be measured separately and paid for under respective item of schedule). |
| 88 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed. |
| 89 | S&F for Aluminium snap grid frame work of 605 X 605 mm panel size of pre powder coated pre fabricated GI section including hangers for false ceiling along the Walls suspended with, including S&F of 600mmx600mm size ceiling board of PVC laminated gypsum board 10-12mm thick and fixed as per manufacturers instruction as per approved sample complete all as specified and as directed. |
| 90 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as directed |
| 91 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as directed. |
| 92 | Excavating in post holes (of similar holes) each n. Exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. Exc. 50m and making good surface complete all as specified and directed. |
| 93 | M&L for plain cement concrete 1:3:6 type C-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete for fencing post, foundation for embedding the post ,as in surface channels and drains etc, complete all as specified and as directed . |
| 94 | S&F rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W(Gde E-250) quality A, complete all as specified and as directed. |
| 95 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 96 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, incl well compacting & laid to levels etc, complete all as specified and directed. |
| 97 | Supply and laying machine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 98 | S&F in repairs Vitreous china wash basin with pedestal, white, of size 630X450 mm including 32mm CP waste coupling, waste pipe, PVC connection 450mm long, brackets complete all as specified and directed. |
| 99 | S&F in replacement Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 100 | S & F Vitreous China Urinal, Half stall type, white including providing and fixing of plugs bedding against wall in CM 1:2 pointing around urinal back in cement mortar complete all as specified and directed. |
| 101 | S&F in repairs 15mm bore chromium plated basin mixer with 450 mm braided PVC connection pipe and provision for pop-up for mixing hot and cold water screwed down for connection pipes fixed including taking down old fittings complete all as specified and directed. |
| 102 | S&F 15mm bore fancy type pillar taps cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe fixed complete all as specified and directed. |
| 103 | M&L 18 to 20 mm thick black granite stone as in WHB counter top, cooking platform, treads of steps, jambs, pillars, window cills & similar nature works, machine cut, (table rubbed and polished) best quality as per sample, over & including 15 mm thick screeding in CM1:4 including rounding & double mouldlng with jointless finish of the edges, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, providing suitable dia hole in the slab for the gas pipe, complete all as specified and as directed. |
| 104 | M&L for rounding to edges of stones slabs one edge , such as in steps, cooking platform, and other similar situations etc, complete all as specified and as directed. |
| 105 | Demolition of brick/block or stone/boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and as directed. |
| 106 | M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 107 | Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed. |
| 108 | Taking down carefully cement concrete / spalled out concrete from RCC roof projections, ceilings, sunsheds, beams etc upto cover depth by chipping out lightly including necessary scaffolding etc complete all as specified and directed. |
| 109 | M&L for rendering 5mm thick in CM 1:3 & finishing the surface even & smooth without using extra cement complete all as specified. |
| 110 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, RCC chajjas/facias etc including all laps, cutting and waste complete all as specified and directed. |
| 111 | M&L for raking out joints/ pointing to to squared rubble masonry, jodhpur type regular course built in CM 1:3 all as specified. |
| 112 | M&L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified. |
| 113 | S&F in repair Soap dish, chromium plated, any type, as approved fixed with brass screws or embedded in wall complete all as specified and directed . |
| 114 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 115 | S&F towel rail brass chromium plated fancy type 20mm dia and 60 cm long fixed between flanges complete all as specified and directed. |
| 116 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed. |
| 117 | S&F in repairs Corner glass shelf 250mm superior quality with CP tubular framing & brackets complete all as specified and directed. |
| 118 | Supply and laying machine / factory made kerb stone of M-25 grade,at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 119 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 120 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 121 | M&L for 15mm thick in cement screed bed/plaster in CM 1:3 in floors and vertical side of sunken floor of stone masonry surfaces/brick work/concrete surfaces mixed with liquid water proofing compund @ 0.20 litre per bag of 50 Kg of cement and finished even and smooth without using extra cement and applying a coat of 30/40 grade hot bitumen @ 1.50 kg/sqm over a coat of bituminous primer @ 0.5 kg/sqm and then pasting of polythene film, 200 micron, with cold cut back adhessive complete all as specified and directed.Note : Liquid water proofing compound shall be measured and paid separately. |
| 122 | M&L for providing PCC lean concrete 1:5:10, type E2 using 40mm graded stone aggregates as in foundation, filling and mass concrete/sunken floors complete all as specified |
| 123 | M&L for 7.5cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed. |
| 124 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft / loose soil complete all as specified and as directed. |
| 125 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. |
| 126 | Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 127 | Demolition and breaking up drain pipes (Salt glazed ware, AC, DWC, HDPE or RCC) of internal dia 150 mm set in cement mortar including PCC in bedding and haunching complete all as specified and directed. |
| 128 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and directed. |
| 129 | M&L 150 mm dia Salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed. |
| 130 | Supplying, laying, jointing and testing of 150 mm dia Reinforced concrete pipes, class NP2 laid and jointed complete with collars drain pipes laid in trenches and jointed complete all as specified and as directed. |
| 131 | Taking down carefully aluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed. |
| 132 | Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site complete all as specified and directed.as directed. |
| 133 | Taking down carefully UNSV Submain wiring and Services cable of any size make, type and capacity and depositing at site and making good to the disturbed surfaces complete all as specified and directed. |
| 134 | M&L for modular point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated but unsheathed single core FR-LSH cable (RYBN) 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC heavy duty concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FR-LSH cable (Green) 1100 volt grade, PVC insulated but unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to earth dolly and including modular sunken galvanized terminal boxes of same make of switch/socket/regulator with sleek and curvy cover plates, for mounting of modular swithces, sockets, fan regulators complete, suitable for One light/fan/bell point controlled by one, one way switch, complete all as specified and directed.Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates |
| 135 | All as per Sr. item No.134 here-in-above, but One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch. |
| 136 | All as per Sr. item No.134 here-in-above, but One socket outlet 3 pin 5 amps on the independent board controlled by one no 5 Amp switch. |
| 137 | All as per Sr. item No.134 here-in-above, but with using 2.5 Sq mm single core multistranded copper conductor cable for 3 pin 16 Amp socket outlet on independent board complete all as specified and directed. |
| 138 | S&F modular switch 1 way 6 Amp, 1 module complete all as specified and directed. |
| 139 | S&F Modular switch flush type single pole one way 6 Amp ISI marked complete all as specified and as directed. |
| 140 | S&F modular switch 1 way 16 Amp, 1 module complete all as specified and directed |
| 141 | S&F Modular switch flush type single pole one way 16 Amp ISI marked complete all as specified and as directed. |
| 142 | S&F modular socket 6 Amp 2/3 pin, combined 2 module complete all as specified and directed |
| 143 | S&F socket outlet 2 in 1, 3 pin, 6 Amp 230 Volt flush type complete all as specified and as directed. |
| 144 | S&F modular socket 6 Amp/16 Amp, 2/3 pin, combined 2 module complete all as specified and directed |
| 145 | S&F Modular socket outlet 2 in 1, 6 pin, 5 and 16 Amp flush type, 230 Volts ISI marked complete all as specified and as directed. |
| 146 | S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed. |
| 147 | Supply and fixing LED lights fitting 1x 20W, 4 ft long, T-5 batten fitting, designed linear sleek aesthetic PVC housing, PC cover ensures soft and glare free lighting wide angle of 120 degree, upto (110Lm/W) complete all as specified and as directed. |
| 148 | S&F bldg security LED Light Luminaire of 35/45 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and as directed. |
| 149 | S&F LED Luminaire 600mm x 600mm, 35/36 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 150 | S&F LED COOL white light fitting mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 151 | Taking down and refixing exhaust fan 300/250mm on same location complete all as specified and directed. |
| 152 | Taking down and refixing only geyser upto 25/50 Ltrs and connecting up including provision of PVC connection for hot and cold water connection complete all as specified and directed. |
| 153 | Taking down and refixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. |
| 154 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grouting with nut bolts, complete all as specified and as directed. |
| 155 | S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 156 | S&F single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amp 'C' curve type, 230 volts, 10 KA complete all as specified and directed. |
| 157 | S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge. |
| 158 | S&F and testing factory made sheet metal enclosure for MCB DB TPN 4 way 415 Volt with double door, IP-43 Protection, duly fixed/concealed in wall complete and making good disturbed surfaces of wall including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed. |
| 159 | S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 Volt with double door, IP-43 Protection, duly fixed/concealed in wall complete and making good disturbed surfaces of wall including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed. |
| 160 | S&F and testing factory made sheet metal enclosure for MCB DB SPN 12 way 240 Volt with double door, IP-43 Protection, duly fixed/concealed in wall complete and making good disturbed surfaces of wall including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed. |
| 161 | S&F MCB triple pole and neutral 415 Volt any rating from 100 Amps, with rupturing capacity 10KA, 'C' curve type, with overload and short circuit protection complete all as specified and directed. |
| 162 | S&F MCB single pole and neutral 240 Volt any rating from 40 Amp to 63 Amps, with rupturing capacity 10KA, 'C' curve type, with overload and short circuit protection complete all as specified and directed. |
| 163 | S&F MCB single pole 230 Volt any rating from 6 to 32 Amps, with rupturing capacity 10KA, 'B' curve type, with overload and short circuit protection complete all as specified and directed. |
| 164 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge.NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one Iength. |
| 165 | M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 4 Sqmm and one run of 4 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge.NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one Iength. |
| 166 | Supply, testing and installation of Electric water storage geyser of capacity 25 Ltrs, BEE 5 star rating, 230Volts, AC, 50Hz, comprising of heating element 2000 watt, storage type steel body with copper tank, puff insulation,both power indicating LED lamp and heating indicating LED lamp neccasry suitable 3 core copper cable,suitable plug top, inlcluding supply and fixing of inlet and out let connection to geyser with steel grip,chromium plated PVC connection of 862mm in length - 02 Nos (one for inlet GI pipe and other one for outlet connection) suitable to connect inlet GI pipe 15mm dia and out let GI pipe 15mm dia (out let PVC connection should be capable to withstand the designed temparature of Geyser) and geyser shall be fixed on wall surface with wall mount bracket and 10 cm anchor bolts as required inclduing all necessary plumbling works and civil works complete all as directed and as specified. |
| 167 | Supply, laying and testing in trenches/on wall / in duct/ through protection pipe LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,cross sectional area 35 sqmm 3.5 core complete all as directed. Note : Earth work and brick work measured and paid separately |
| 168 | Supply, laying and testing in trenches/on wall / in duct/ through protection pipe LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,cross sectional area 16 sqmm 2 core complete all as directed. Note : Earth work and brick work measured and paid separately |
| 169 | Supply and laying of sand for sand cushioning for cable protection in trenches including punning down of sand layer all as specified and directed. Note :- Punned thickness shall only be measured and paid. |
| 170 | Supply and laying unreinforced Precast concrete cable cover, class LV, type 1, flat size 300 mm x 180 mm x 40mm, complete all as specified and directed. |
| 171 | S&F in replacement of GI tubing , light grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed. |
| 172 | M&L in repairs Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC 1:3:6 type C1 in chamber, precast RCC 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all as specified and directed. Note : (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 173 | Note:- (i) Qty's have been clubbed from 2 Nos sanction Job's, whose details are encl as per appx.(ii) The contract sum shall be arrived at after deducting amount of schedule of \\"Credit\\" from the Total quoted amount. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
