|
| 1 | Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed. |
| 2 | Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in excavated soil |
| 4 | M&L for hard core of broken stone or boulders of gauge n. exc. 63 mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface. |
| 5 | M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified. |
| 6 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 7 | M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed. |
| 8 | S&F 150 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings (such as bends, elbows, Tee, short pieces, connectors, backnuts, diminishing pieces, caps,plugs and unions etc) complete all as directed. |
| 9 | M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested complete all as directed. |
| 10 | M&L for framed work in repairs such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165. |
| 11 | M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth,not otherwise described and appying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed |
| 12 | M&L Sand filling under floors or in foundations including atering and consolidation complete all as directed. |
| 13 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exc 25 cm , in Soft/Loose soil. |
| 14 | Material and labour providing reinforced Cement Concrete Type B1, 1:2:4 using (20mm graded curshed stone aggregate) as in foundations, footings, etc complete all as specified and as directed. |
| 15 | S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position as specified. |
| 16 | M&L for MS Angle iron as fencing post cut indepently and embedding in concrete including cutting tops to shape as directed , drilling holes , notching for wire at flat iron fillets , (for securing wire mesh etc) including all necessary drilling bolting or rivrting etc complete all as specified and directed. |
| 17 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, diameter of neck should be 5 to 10 mm. |
| 18 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts, etc. including provision of binding wire. |
| 19 | Supply only chain link MS galvanized fencing of 3.15mm dia wire and 50x50mm mesh size (pitch of wire). |
| 20 | S&F Non skid joint less coloured ceramic tiles 7-8mm thick size 300x300 mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over M&L 20 mm thick screed bed or bedding layer of cement and tiles shall be free from visible defects including dismantling existing tile work with screed bed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE. Complete all as specified and directed. |
| 21 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm thick rendering or bedding layer of cement mortar 1:4 and including dismantling existing tile work with plaster complete all as specified and directed. |
| 22 | M&L for preparation of old plastered surfaces of walls and applying one coat oil bound distemper complete all as directed. |
| 23 | M&L 18 mm thick granite (any colour) work as in pillars, display boards, wall cladding and like incl 15 mm thick screed bedding in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding and polishing and rounding of edges complete, all as specified and directed.Note : Granite colour approved by Engr-In-Charge. |
| 24 | S&F in repair CP Swag neck taps complete all as specified and directed by Engineer in charge.Make- Parryware or Equalent |
| 25 | S&F sinks made of stainless steel with drain board 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl pvc waste pipe and cp waste fitting. overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 26 | M&L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement. |
| 27 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches complete |
| 28 | S&F in repair CP brass long body bib cock complete all as specified and directed by Engineer in charge.Make- Parryware or Equalent |
| 29 | S&F in repairs 20 mm bore of CPVC pipes SDR 11 & plain and brass fiitings and fixed complete to wall or laid in floor complete all as directed. |
| 30 | S&F in repairs 15 mm dia long body Bib taps, cast copper alloy chromium plated with capston head , screwed down, screwed for iron pipe complete all as directed.ISI marked. |
| 31 | S&F in repairs vitreous china squatting pan \\"orissa\\" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. |
| 32 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified. |
| 33 | S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed. ISI marked |
| 34 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed. ISI marked |
| 35 | S&F in repars angle valve fancy type cast copper alloy chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified.ISI marked |
| 36 | S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl 32 mm dia CI Brass waste coupling incl brackets complete all as specified. |
| 37 | S&F in repairs brass chromium plated health faucet with 1.2m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe complete all as specified. Make: Hindware or equivalent |
| 38 | S&F in repairs brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directed. ISI marked |
| 39 | S&F in repairs 600 x 800mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. |
| 40 | S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed. ISI marked |
| 41 | M&L for complete removal of existing treatment from surfaces of walls/ ceiling, washing with water and applying two coats of OBD paint as per manufacturers instructions over a coat of primer over one coats of putty 1.5mm thick layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- Asian paints or Equivalent |
| 42 | M&L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement. |
| 43 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with fittings such as bend, branch piece, socket etc with rubber ring joints laid in floors or trenches, fixed to walls etc complete |
| 44 | S&F PVC (SWR) gully/S/P trap 125/110 mm, setting and jointing with solvent cement |
| 45 | M&L for chequered cement concrete tile machine pressed PU coated with grey cement and pigment of size 300x300x19/20mm laid over screed bedding layer 15 mm thick in CM 1:6 and including dismantling existing tile work with screed bed.complete all as specified and directed. |
| 46 | M&L for plain cement concrete (1:4:8) type D2 using 40mm graded aggregate as in sub base of floor, foundation, filling and mass concrete complete |
| 47 | Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm |
| 48 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing. |
| 49 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (style) with2,4 or 6 raised panel design with 2mm thick mouded PVC sheet on front face & 2mm plain colour PVC sheet on back face with particle board core all as per specification and directed. |
| 50 | S&F mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified. |
| 51 | S&F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed. |
| 52 | S&F 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 53 | S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 54 | M&L for preparation of old decorated surface of exterior wall by removing existing treatment and washing with water and applying two coats of exterior antifungal acrylic emulsion paint as per manufacturers instructions over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.Make:- Apex Ultima of Asian paints or Equivalent |
| 55 | S&F Powder coated of any colour (minimum thickness of powder coating 50 micron), aluminium door shutters and aluminium Partition section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges,anodised aluminium snap beading, screws etc and incudung 5mm thick glass and 10-12mm thik partical board fixed into doors/partitions. complete all as specified. |
| 56 | S&F pressure pump motor, single phase, 230 volts, 50 Hz, of capacity 1 HP complete of 1 HP, complete of pressure pumps & system Model no 100B pressurejet including making connections complete as per site requirement and all as specified and directed. Make crompton or equivalent as approved by GE |
| 57 | M&L for steel anchor bolts of length 15cm long, dia of neck 10 to 12 mm complete fixed in position complete all as directed |
| 58 | S&F Pre- painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified |
| 59 | M & L for 75 mm thick cement concrete 1 : 4 :8 type C-2, (using 40 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work. |
| 60 | M&L for providing chequered cement concrete rubber moulded coloured tiles glossy factory made of hydraulic pressed finish of 25 mm thick and size not less than 300x300 / 350 x 350mm thick set and jointed in neat cement slurry in floors with grey cement and pigments and with 15mm thick screed bed or bedding layer in CM 1:6. Complete all as directed Please Enable Macros to View BoQ information |
