|
| 1 | Dismantaling plain or corrugated AC sheeting any gauge, thickness, including nainital or similar patterhn roof covering all as specified and directed.. |
| 2 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sky blue/ sea green colour having tensile strength of 550 MPa as in roof covering, fixed with self tapping screws complete all as specified and directed. |
| 3 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridges, velly gutters fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling framed work timber scantling 40 sq cm and over in section and in any position complete all as specified. |
| 5 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section unframed work complete all as specified and directed |
| 6 | S&F rolled mild steel Fe-410W (Gde-E-250) quality 'B'Roof trusses (framed), trussed, purlins, crane gantries , rails and fastening and havy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and directed. |
| 7 | S&F mild steel bolts. Purpose made. With hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square complete all as specified. |
| 8 | S & F MS plates (plain or chequered) channels, square cut or notched ordinary and counter sunk) forming holes, without any attachment. |
| 9 | Demolition of brick work built in cement mortar including all quoins, arches, pillers etc all as specified and directed.. |
| 10 | M&L for brick work in CM 1:6 with using subclass 'B' bricks, old size straight or curbed on plan exc 6 m mean radius complete all as specified and directed by Engr-in-Charge.. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed |
| 12 | Providing and fixing Gypsum Board 600mmx600mmx12mm thick in ceiling fixed or laid Aluminium frame work with screws complete all as per manufacturers instructions and as directed. |
| 13 | S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specified and as directed. |
| 14 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.. |
| 15 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed. |
| 16 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed. |
| 17 | M&L glazed ceramic coloured tiles size 450x300x7mm/350x250x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified and directed. |
| 18 | Taking down cement plaster on brick/stone walls etc any description including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 19 | M&L for rendering 15mm thick in CM 1:6 any faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.. |
| 20 | M&L for Cement plaster in CM 1:4, 15 mm thick on the fair faces of brick wall and finishing the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of white chalk whiting, complete all as specified and directed. |
| 22 | M&L preparing newly plastered surfaces and applying two coats of cement base paint over a coat of primer on wall complete all as specified and as directed . |
| 23 | M&L Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of oil bound distemper all as specified . |
| 24 | M&L Preparing plastered or unplastered old decorated surfaces of walls complete removal of exiting treatment and applying two coats of cement based paint all as specified . |
| 25 | Material and labour preparation of old/previously treated wooden surfaces of any description over 10cm width or girth and apply one coats of synthetic enamel paint all as directed and specified. |
| 26 | Taking down chowkhats or frames with shutters(without taking off shutters from the frames) not exceeding 1.5 sqm and remove from site as directed and specified. |
| 27 | All as per item No 26 above here-in-before but exceeding 1.5. sqm but n.exc 4 sqm each and -ditto- complete |
| 28 | Cutting holes in brick walls built in cement mortar exceeding half brick but n.exc one brick for inserting hold fasts or similar work and madegood the dismantles portion in cement concrete 1:2:4 type B-1 as directed and specified. |
| 29 | Supply and fix for 35 mm thick plain, framed, panelled door shutters (any numberer of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats. |
| 30 | Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, the size of members as specified in SSR , Part I section 8, clause No 8.24 (a) and as directed |
| 31 | S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc. Note - The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories , complete all as specified and directed. . |
| 32 | S&F for aluminium anodised powder coated Deco grill (DG-104), 10mm wide with U shape snap beading complete all as specified and directed. |
| 33 | S & F aluminum anodised powder coated frame for doors, windows, vantilator with one or more rebates including joining cleat for fixing etc. Complete all as specified. |
| 34 | S & F aluminum anodised powder coated window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing , anodised aluminium snap beading, screws etc. Complete all as specified. |
| 35 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, as specified. |
| 36 | S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mmcomplete all as specified and directed |
| 37 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane as directed and specified |
| 38 | Supply and fix Galvanised mild steel wire cloth of 0.56 mm nominal dia of wire, average width of apparature 1.18mm & fixed with tinned tacks or galvanised wire staples as diected and specified. |
| 39 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixedas diected and specified. |
| 40 | Supply and fix Mild steel medium weigh butt hinges 100mm size and fixed as directed and specified. |
| 41 | S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed as diected and specified.. |
| 42 | Supply and fix Aluminium handles, cast type, anodised size of handle 150mm as diected and specified. |
| 43 | Demolition of reinforced cement concrete of any description all as directed by Engineer-in- Charge. |
| 44 | M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking,bending, spirally, hooking and binding with and incl MS wire 0.9 mm dia complete all as specified and directed. |
| 45 | All as per item No 44 above here-in-before but 6 mm to 8 mm dia and -do- complete all as directed and specified. |
| 46 | Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified.. |
| 47 | Taking down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified.. |
| 48 | Supply and fix galvanised steel water tubes medium grade 15mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified. |
| 49 | Supply and fix galvanised steel water tubes medium grade 20mm dia with fittings, fixed to walls ceilings and laid in floor etc complete all as directed and specified. |
| 50 | Cutting chases, pinning in. makinggood to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 51 | Supply & Fix rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including dismantling existing water tanks all directed and specified. |
| 52 | S & F 20mm bore PTMT high pressure rate float valve with aluminium rod and ball complete as directed and specified. |
| 53 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flushing cistern & flush pipe) Complete all as specified and diected. |
| 54 | S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified. |
| 55 | Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ball valve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified. |
| 56 | S & F in repair bib taps cast copper alloy fancy type C.P 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified. |
| 57 | S & F in repair concealed stop valve cast copper alloy fancy type C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. |
| 58 | S & F in repair for 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as diected and specified. |
| 59 | S & F in repair for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as diected and specified. |
| 60 | Supply and fix PVC connections 15mm bore with PTMT nuts with washers of length 600 mm as diected and specified.. |
| 61 | Supply & Fix grating square 150mm size of PTMT all as directed and specified |
| 62 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor as diected and specified.. |
| 63 | S&F in repairs drappery rods fancy type size, and pattern as approved 20 mm dia with gold colour knobs at both ends including sliding system and arrangment for sheer curtain complete all as directed |
| 64 | S&F 600mm x 450mm bevelled edge mirror, Bevelled edge mirror of selected quality glass, mounted on 6 mm ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers as diected and specified. |
| 65 | S & F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 66 | S&F 15 mm dia bore shower rose of PTMT any colour with arm 195 mm long, with with bend of 45 degree with flange of PTMT of required colour, in cl screw with iron pipe as diected and specified. |
| 67 | S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) as diected and specified. |
| 68 | M&L Waste fitting brass CP for WHB and urinal basins etc with long screwed shanks and fly nut flange complete and fixed. |
| 69 | Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick all as directed and specified. |
| 70 | M&L 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed. |
| 71 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed |
| 72 | M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete |
| 73 | M&L brick work with sub class B bricks straight or curved on plan to exceeding 6m mean radius built in CM 1:4 all as specified. |
| 74 | M&L for 15mm thick rendering in CM (1:4) on fair/un-even surfaces of brick work or concrete surfaces using WPC Copound to be finished even and smooth without using extra cement, complete all as specified and directed. ( WPC paid separatly) |
| 75 | Supplying, laying and testing of 150mm dia DWCPE pipe laid in trenches, complete all as specified and as directed. |
| 76 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia DWCPE pipes after they are laid and tested including demolition of old bed and pipes omplete all as specified and as directed. (thickness of concrete bed 100mm). |
| 77 | M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed. |
| 78 | S & F in repair precast fibre reinforced cement concrete Manhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 500mm x1000mmx80mm omplete all as specified and as directed. |
| 79 | Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150/200mm dia pipes omplete all as specified and as directed. |
| 80 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed. |
| 81 | Excavation in any type of soil in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out complete all as specified and as directed. |
| 82 | Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and as directed. |
| 83 | Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil omplete all as specified and as directed. |
| 84 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc including making good the disturbed surfaces to match with the existing complete |
| 85 | Material & labour for point wiring concealed type for light point/exhaust fan point with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etcincluding all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (Note: 1. Rates deemed to be included for GI metal flush box reqd size and paid separately under relevant items). |
| 86 | (a) One light point controlled by one switch |
| 87 | (b) One ceiling/exhaust fan point controlled by one switch |
| 88 | (c) One socket outlet 5 Amps controlled by one switch on same board |
| 89 | (d) One socket outlet 5 amps controlled by one switch on independent board |
| 90 | (e) One bell point controlled by one bell push switch |
| 91 | All as per above item No 85 but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire. |
| 92 | S&F of Switch piano flush type 5/6 Amps single pole one way 230 Volts complete. |
| 93 | S&F of Switch piano flush type 15/16 A single pole one way 230 Volts complete. |
| 94 | S&F of Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volt complete. |
| 95 | S&F Socket Outlet 2 in 1, 3/6 pin 5 and 15 Amp flush type 230 Volts complete. |
| 96 | S/F Bell push, flush type 5 Amps 230 Volts complete. |
| 97 | S&F ding dong bell, AC, 230 volts, single pole complete. |
| 98 | S&F lamp holder, 230 volt AC, PVC / Polycarbonate type of angular shape with back plate suitable for batten fittings complete. |
| 99 | S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete. |
| 100 | M & L cutting chases, chipping in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed point wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge. |
| 101 | M&L in repair for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area 1100 V,stranded copper conductor, multistranded, and one single core green PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete |
| 102 | S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, 4 way IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete. |
| 103 | All as per item No 97 above but 8 way complete all as directed by Engr-in-charge. |
| 104 | S&F of factory made distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, concealed type with suitable bus bar, neutral link, earth link suitable complete. |
| 105 | S&F of for MCB TPN, 240 Volts, AC, 63 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete . |
| 106 | S&F of for MCB, DP/SPN, 240 Volts, AC, 63 Amps of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete. |
| 107 | S&F of for MCB SP, 240 Volts, AC, 32 amps, breaking capacity 10 KA, 'C' curve and connection by using suitable copper lugs complete. |
| 108 | S & F LED Batten type fitting for surface/wall mounted 20 W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with polycarbonate housing & integrated electronic driver complete with connector block, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. |
| 109 | S & F LED Batten type fitting for surface/wall mounted 9/10W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with polycarbonate housing & integrated electronic driver complete with connector block, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. |
| 110 | S&F indoor decorative wall light fixture suitable for 10 W LED lamp,230V for soft light ambiance, made up of polycarbonate, spiral B22 base lamp holder used,globe shape, incl LED lamp 10W(warm/CDL type) and remove the UNSV fittings and all as specified and directed. |
| 111 | S&F lighting fixture wall mounted LED bulk head luminaire 9/10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed. |
| 112 | Supply and fixing in replacement of 300mm dia, 900 RPM, exhaust fan metal body witlh louvers including frame, blades complete all as specified and directed. Note: Old fan retrived from repairs shall be deposited in MES E/M store yard. |
| 113 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and as directed |
| 114 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note: Old fan retrived from repairs shall be deposited in MES E/M store yard. |
| 115 | Supply and fixing in repairs of Water heater storage type, electric, capacity 25 Ltrs BEE 5 star rated, wattage 2KW, ABS plastic body, temparature indicating dial, enamel coated heating element, glass line coated inner tank, magnesium anode type, adjustable thermostat, inlet (cold water) and out let(Hot water) pipes incl fixing with fasteners at wall and making good, finishing to disturbed surface to match the existing surface incl connection complete. Note: Old fan retrived from repairs shall be deposited in MES E/M store yard. |
| 116 | Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete as required with connections and remove the UNSV electric meter shall be deposited in MES store yard and all as specified and directed. |
| 117 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and directed . Please Enable Macros to View BoQ information |
