|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Laying boulder solings including ramming and dressing bed to proper level.... |
| 3 | Cement concrete (1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any |
| 4 | Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any (Rate Analysis attached) |
| 5 | Reinforcement for R.C. works in all sorts of structures including distribution bars,stirrups,binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length,hooking and bending to correct shape,placing in proper position and binding with 16 guage black annealed wire at every intersection complete as per drawing & direction. (Rate Analysis attached) |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30mm thick shuttering without staging in foundation etc. |
| 7 | Sl. No. 29// Page- 32.::125mm th. Brick work with 1st class bricks in cement mortar (1:4) In superstructure G.F. |
| 8 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (ii) 25mm thick, |
| 9 | P-164/ 2(ii)/a:: Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface, including throating nosin and drip course where necessary.ii) With cement mortar (4:1) (a) 20 mm thick plaster. |
| 10 | Item No.8//Page No. 166::Neat cement punning about 1.5mm thick in wall dado, window sills floor drain etc. |
| 11 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 connected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. [Page 100 Item 2] |
| 12 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).a) With 0.5 mm thick sheet |
| 13 | Display Board |
| 14 | GST 18% |
| 15 | Cess @ Rs.1% Please Enable Macros to View BoQ information |
