|
| 1 | Cutting or uprooting grass incl removing old mud phuska/ roof treatment of 80mm thick (average) and description, removing rubbish off the premises, cleaning surface and preparing to receive new treatment complete all as specified. |
| 2 | M&L for screed bed or bedding layer of cement mortar 1:4, 20 mm thick finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L for preparing surfaces for roof treatment by removing all loose gravel, dirt, oil & foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application, provide 75 mm x 75 mm covering made out of PMC mortar as above on all joints of vertical up stands to ensure does not exceed 5% immediately before application of liquid membrane material incorporation & Protection to be provided, applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having sun reflectivity index (SRI) of 105 on top of concrete roof in three coats @ 10.76 ltr/10sqm with 1st coat applied in water ratio (ratio elastomeric liquid water proofing membrane: water will be 3:1) on primer, after the 1st coat is completely dry becomes slightly darker than apply 2nd coat with undiluted elastomeric water proofing liquid in criss-cross direction with roller. Spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky. After the drying of 2nd coat completely applying the final coat of undiluted elastomeric water proofing liquid in direction perpendicular to previous coat. The min thickness of dry film of complete application should not be less than the as recommended by manufacture the overall dry thickness should not be in any case less than 1.5mm complete all as specified. |
| 4 | Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified. |
| 5 | Pre-painted galvalume aluminum zinc coating GI based corrugated, semi corrugated or trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 6 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 7 | M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified. |
| 8 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified. |
| 9 | M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade over and including 100mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) over 25mm thick sand layer and filling the joints complete all as specified. |
| 10 | Providing and laying at or near ground level factory made kerb stone of size 300x300x150mm of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 11 | Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified. |
| 12 | M&L for rendering 10 mm thick in CM (1:4) on other than fair faces of brick masonary or concrete surface of wall, finished even & smooth, without using extra cement, complete all as specified. |
| 13 | M&L for rendering 15 mm thick in CM (1:4) mixed with WPC but on fair faces of brick wall, finished even & smooth, without using extra cement complete all as specified (Note : WPC shall be supplied and paid separately) |
| 14 | M&L for Rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement ,complete all as specified. |
| 15 | M&L for preparation of new plastered surfaces and applying thouroughly wetted surface to ensure better sticking including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work and applying two coats of exterior weather proof paint in camouflaging pattern with roller application over one coat of water based white pigmented akali resistant priming paint for external wall complete all as specified. |
| 16 | M&L preparation of new plastered surface and applying two coat of distemper oil emulsion over one coat of water based white pigmented alkali resistant priming paint over 1 mm thick wall care putty on wall complete all as specified. |
| 17 | M&L for Preparation of new surfaces of ceiling,chajja etc, and applying three coats of white wash, complete all as specified. |
| 18 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified. |
| 19 | S&F of 35mm thick, flush shutters, solid core construction including both side is covered with decorative sunmica sheet of 0.80 -1.00 mm thick (Approved colour) with lipping/frame to match, fitted to chowkats complete all as specified. |
| 20 | S&F Aluminium handles ,plate cast type anodised of 150 mm size, complete all as specified. |
| 21 | S&F Aluminum anodised barrel tower bolts of extruded section and fixed of 200 mm size, complete all as specified. |
| 22 | S&F Butt hinges medium weight cold rolled mild steel of 100 mm size and fixed , complete all as specified. |
| 23 | S&F Aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts, four on bolt plate and two on staple plate (ISI marked ), complete all as specified. |
| 24 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified. |
| 25 | S&F powder coated aluminium door frame with shutter having 150mm x 44mm x 2.85 mm thick bottom rail,150 mm x 44mm x 2.85mm thick middle rail, 100mm x44mm x3 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm anodised aluminium handle 200 mm long (02 Nos) , 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Alu tower bolt, 1x aluminium alloy, 16mm dia and 250mm long anodised, sliding door bolt with hasp, staple (bolt type), 1x double legged floor door stopper aluminum alloy body and tongue, 1 x Aluminium body hydraulically door closer , designation No-3, universal type, weight between 61 to 80 kg etc inlcuding frame of section 100 mm x 44 mm x3 mm and door shutter, top and bottom portion covered with and including 5.5mm thick tint glass ordinary quality , one mortion lock with shutter and fixing complete all as specified. |
| 26 | S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track glass shutter and in one track stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, including all fittings such as aluminium handle of size 100mm and locking arrangements with each moving leaf, aluminium jali, complete all as specified. |
| 27 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified. |
| 28 | M&L 4 mm thick high non asbestos fibre cement designer building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete. (Frame work for ceiling shall be measured and paid separately) complete all as specified. |
| 29 | S&F anodised aluminium snap grid frame work for false ceiling suspended and fixed with 2 mm dia ms wire complete all as specified. |
| 30 | S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 31 | S&F for PVC wall panelling with panel of 300 mm x 6 mm Hollow section fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angle fixed with solvent cement complete all as specified as manufacturer's instructions complete all as specified. |
| 32 | Supply only integral water proofing compound complete all as specified. Please Enable Macros to View BoQ information |
