|
| 1 | Electrical Items : |
| 2 | Earthing complete Conventional type having intermittent layer of charcoal and salt |
| 3 | ACE CHEMROD ( Artificial Concept of Earthing by Chemical Rod ) :- ACE Chemrod Earthing Electrode (consisting mild steel galvanised pipe of size 2500 mm in length X 48 mm outer dia. X 2 mm thick, MS rod of size 2575 mm X 16 mm be welded with bottom. The epoxy insulator of not less than 100 mm length is to be fixed on top of mild steel galvanised pipe. A highly conductive substance is to be filled in residual gap between pipe and rod) with Highly conductive substances not less than 25 kg for soil treatment |
| 4 | Earthing (Chemical) with GI earthing pipe 40 mm 3.1 mtrs. Long (Bentonite as intermittent layers) |
| 5 | Earthing (Chemical) with GI earthing pipe 20 mm 2.5 mtrs. Long |
| 6 | GI service pipe 40mm diameter 3mtr length |
| 7 | GI Stay set completefor D/s/s (1900x20 mm) with staywire 7/10 SWG 8 kgs & guy Insulator) |
| 8 | GI Stay Set Complete for D/S/S(1900x16mm) with staywire7/12SWG andGuy insulator |
| 9 | 11kv Stay set complete (1800x16 mm) with stay wire 7/10 SWG 8 kgs & guy Insulator) |
| 10 | LT Stay set complete (1700x16 mm) with stay wire 7/12 SWG |
| 11 | Anticlimbing Device(Barbed wire) |
| 12 | Danger Board 33KV |
| 13 | Jointing sleeve (Aluminium)suitable for 150-232sq.mm |
| 14 | Earth clamp for earthwire (50 x 6 mm) [GALVANIZED] |
| 15 | P G clamp for 200/150 sq mm conductor |
| 16 | P G clamp for 80/100 sq mm conductor |
| 17 | GI wire 6 SWG |
| 18 | Suitable Lugs |
| 19 | Suspension Clamp Assembly Suitable upto 70 -95 Sqmm Bare Messenger (Including 1 No. Suspension Clamp with Bracket ,2 Mtr SS Strap + 2 Nos. SS buckles) |
| 20 | Dead End Clamp Suitable for 95-150 Sq. mm. Bare Messenger (Including 1 No. Dead End Bracket + 1 No. Dead End + 1.5 Mtr SS Strap + 2 Nos. SS buckle) |
| 21 | Angle/side Stay Clamp ( 50x6 mm) for 8 mtr 200kg PSC Pole[GALVANIZED] |
| 22 | LT AB Cable accessory, 1.1Mtr. Stainless steel strap IF207(20x0.7) |
| 23 | Buckle for strap |
| 24 | Spring loaded distribution Bus Bar insulated Box for fixing on pole suitable for AB XLPE Cable and three phase connection 1 incoming and out going 3 phase connection as per field requirement |
| 25 | Service main anchor clamp for proper support of service cable(4mm2 and 10 mm2) |
| 26 | GI Stay Wire 7/8, 7/10, 7/12, 7/14, 7/16 |
| 27 | LT pre insulated mid span joint suitable 50 sqmm |
| 28 | LT pre insulated mid span joint suitable 95 sqmm |
| 29 | GI Base Plate for 33KV |
| 30 | Stone Base Plate for 11KV,DSS,,LT |
| 31 | Suspension Clamp Suitable for 95 -150 Sq. mm. BareMessenger (Including 1 No. Suspension Clamp with Bracket + 1.5 Mtr SS Strap + 2 Nos. SS buckle) |
| 32 | Dead End Clamp Suitable above70 Sq. mm. Bare Messenger (Including 1 No. Dead End Bracket + 1 No. Dead End + 2 Mtr SS Strap + 2 Nos. SS buckle) {minimum breaking load -15 KN } |
| 33 | DP channel support clamp (50x6mm)for 8mtr 200kg PSC pole {GALVANIZED}(1.1kgs .each |
| 34 | Galvanised Nuts & Bolts (Assorted Size) |
| 35 | Hot Dip Galvanized Fabricated Iron Material for 33 KV Line, LT line & DSS ** NOTE: 1. GST MUST BE DEFINE/ MENTIONED OTHERWISE PRICE PART NOT BE CONSIDERED., 2. ** MT/Kg. Please Enable Macros to View BoQ information |
