|
| 1 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation |
| 2 | Cement concrete 1:4:8 mixing by mechanical meansusing concrete mixer volumetric type |
| 3 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. |
| 4 | Steel work in built up tubular pipes (round, square or rectangular hollow tubes etc. ISI Marked) for flat shed (ie.Where no truss work is involved) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. |
| 5 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Foundation. |
| 6 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Superstructurer |
| 7 | Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base |
| 8 | Dismantling brick work tile, masonry or tile lining |
| 9 | Cement concrete 1:5:10 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 10 | Marble work of thickness18-20mm for wall lining (veneer work), backing filled with a grout of average 12mm thick in cementmortar 1:3 (1cement : 3coarse sand), including pointing with white cement mortar 1:2 (1white cement : 2 marble dust) with an admixture of pigment to match the marbleshade (Tobesecured to the backing by means of cramps, which shall be paid for separately UdaipurGreenMarbleTiles of thickness 15mm to 20mm |
| 11 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 12 | Dismantlingasbestoscement celotaxor other hardboard ceilingor partition walls including supporting timber |
| 13 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 14 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge 6mm thick ACP Sheet |
| 15 | Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 16 | Providing and Fixing ceiling consisting of12.5mm thick Gypsum Board of any sizeG.I. Cradling hanged from the ceiling by means of G.I.hanger complete as per drawings ,specifications and to the entire satisfaction of engineer-in- charge. |
| 17 | Providing of MS Gutter |
| 18 | Repair of existing structure as per items CSR 2020 |
| 19 | Providing & fixing of stainless steel alphabets as per items CSR 2020 |
| 20 | Providing electrical as per items CSR 2020 Please Enable Macros to View BoQ information |
