|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, hold fasts etc. complete and stacking within 50 metres (fifty meter) lead Of area 3 sq. metres and below including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres (fifty meter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres (fifty metres) lead as direction of Engineer-in-charge nominal mix 1:3:6 or richer mix (including equivalent design mix) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 4 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of use full materials near the site within 50 metres (fifty metres) lead and disposal of unserviceable materials into municipal dumps : 100mm dia (one hundred millimetres) dia including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 5 | Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50mtr. (fifty metres) dressing of sides and bottom and back filling in trenches with excavated suitable material including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 6 | Providing and laying cement concrete 1:4:8 (one cement isto four coarse sand isto eight graded stone aggregate) 40mm (forty millimeter) nominal size and curing complete including cost of form work in foundation and plinth including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in foundation and plinth in cement mortar 1:6 (one cement isto six coarse sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in cement mortar 1:4 (one cement isto four coarse sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 9 | Repairs to plaster of thickness 12mm to 20mm (twelve millimeter to twenty millimeter) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joint sand preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge With cement mortar 1:4 (one cement isto four fine sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 10 | 15mm (fifteen millimeter) thick cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement isto six sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 11 | Steel work in built up tubular (round,square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Sal wood including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 600x600mm (six hundred into six hundred millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 14 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm (six millimeter) thickness, including grouting of joints (Payment for grouting of joints to be made separately) size of tiles 600x600mm (six hundred into six hundred millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 17 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 18 | Providing and fixing 12 mm (twelve millimeter) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 19 | Providing and fixing 35mm (thirty five millimeter) thick glazed Shutters for doors, windows and clerestory windows using 4mm (four millimeter) thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with nacessary screws, second class teak wood including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 20 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge 35mm (thirty five millimeter) thick shutters including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 21 | Providing and fixing aluminium sliding door bolts, ISI markedanodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16mm (three hundred into sixteen millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 22 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10mm (two hundred fifty into ten millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10mm (one hundred fifty into ten millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 24 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125mm (one hundred twenty five millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 100mm (one hundred millimeter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 26 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete single Rubber Stopper including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 27 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc.complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 28 | Providing and fixing bright finished brass 100 mm (one hundred millimeter) mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 29 | Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc. including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 30 | Providing and fixing aluminiumdie cast body tubular-type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35kg (thirty five killogramme) and door width upto 700mm (seven hundred millimeter) with necessary accessories and screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 31 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Oragnic Compound) content, with ready mixed pink or grey primer on wood (hard and soft wood) having VOC content less then 50 grams/litre including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 32 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade.Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre/ten square meter) over an under coat of primer applied @0.75 ltr/10 sqm. (zero point seventy five litre/ten square meter) of approved brand and manufacture including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting steel work with Deluxe Multi Surface Paint Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre/ten square meter) over an under coat of primer applied @0.80 ltr/10 sqm. (zero point eighty litre/ten square meter) of approved brand and manufacture including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 34 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) (three point eight four kilogram/ten square meter) including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 35 | Applying priming coat : with ready mixed red oxide zinc chromate primer of approved brand and manufacturer on steel galvanised iron/steel works including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 36 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 37 | Wall painting two coats with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, (fifty grams/litre) of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 38 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete On steel work including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred millimeter) sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (five hundred eighty into four hundred forty millimeter) with integral type foot rests including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 40 | Providing and fixing wash basin with C.I. brackets, 15mm (fifteen millimeter) C.P. brass pillar taps, 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty millimeter) with a pair of 15 mm (fifteen millimeter) C.P. brass pillar taps including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 41 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15mm (fifteen millimeter) dia nominal bore including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 42 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15mm (fifteen millimeter) nominal bore including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 43 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931 15mm (fifteen millimeter) nominal bore including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 44 | Making plinth protection 50mm (fifty millimeter) thick of cement concrete 1:3:6 (one cement isto three coarse sand (zone- III) : six graded stone aggregate 20 mm (twenty millimeter) nominal size) over 75mm (seventy five millimeter) thick bed of dry brick ballast 40 mm (forty millimeter) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 45 | Providing and fixing soil, waste and vent pipes 100mm (one hundred millimeter) dia Centrifugally cast (spun) iron socket and spigot (S&S) pipe as per IS:3989 including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 46 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme ) and weight of frame 15 kg (fifteen kilogramme), R.C.C. top slab with 1:1.5:3 mix (one cement isto one and five Fine sand isto three graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm nominal size), inside plastering 12 mm (twelve millimeter) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm (four hundred fifty five millimeter into six hundred ten millimeter) and 45 cm (forty five centi meter) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. |
| 47 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials within all leads, lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. |
| 48 | Providing and fixing 0.60mm. (zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. |
| 49 | Providing and fixing ridges or hips 60cm (sixty centimeter) overall with 0.60mm (zero point six zero millimeters) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster(RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of back coat of polyster of 5 (five) microns over 5 (five ) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diameter and prepainted galvanised iron limpet and bitumen washer complete in all accessories as required as per the directions of the Engineer-in-Charge as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. |
| 50 | Providing and fixing M,S. (Mild steel) BP (Black plain) sheet 1.66mm to 2mm (one point six six milimetres to two milimetres) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate including royality charges, octroi, malkhana, sale tax, G.S.T. and all other taxes as imposed by the Government. . Please Enable Macros to View BoQ information |
