|
| 1 | excavation in foundation by manual means in ordinary soil (Loam,clay,or sand) including lift upto 1.5m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation tranches or onto the plinth and removal and disposal of surplus earth as directed by the engineer -in charge upto a distances of 30m fromthe foundation trenches. for bouilding work only. (S.0.R S.I. No. 251)4.1.1 |
| 2 | Earth work embankment with ordinary soil in 20 cm layer i/c ramming & dressing with cartage from distence of 3.00km (A.R) (1KM Kacha+2KM Pacca Road) |
| 3 | Cement Concrete with 4 cm. Gauge approved brick ballast, fine send OF 1.25 F:M and cement in proportion of 8:4:1 in foundation ( S.O.R S.I. No. 281) |
| 4 | M-150 brick work in 1:4 (one cement and four fine sand of 1.25 F:M. motar Cement & C. Sand Mortar in foundation & plinth including supply of all meterials, labour and T&P etc. required for proper completion of work. (S.O.R S.I. No. 305) 6.1.1 |
| 5 | R.C.C works with cement approved coarse sand and 2 cm gauge approved stone grit in proportion of 1:2:4 in lintalsof doors, windows and shunshades excluding supply of reinforcement and its fixing and bibding but including its fixing and binding the same with 24 B.W.G.G.I binding the wire same and including necessary centering and shuttering etc. and supply of all meterials, labour and t&p etc. required for proper completion of work. binding wire of supplied by the contractor of work.(S.O.R -2025 S.I.No.287)5.6.5 |
| 6 | Mild steel work in R.C.C. work (as per PWD shed of rate S.I.No. 504) |
| 7 | C.C with 4cm gauge approved stone ballast coarse sand and cement approved c/sand & 2cm gauge stone grit/instead of 4cm gauge stone ballast. (S.O.R-2025 S.I. 279-A) 5.4.1 |
| 8 | 12 mm thick plaster with one part cement & four parts of approved c/s (as per PWD shed of rate S.I.No. 584) |
| 9 | providing and laying vetrified floor tiles in dufferent sizes (thicjbess to be specified by the manufacure). With water water absorption less than 0.08% and conforming to is 15622, 0f approved make, in all colours and shades laid on 20mm thick cement maoar 1:4 (1 cement:4 coarse sand) jointing with grey cement slurry@ 3.3kh/sqm including grouting the joints with while cement and matching oigments etc. complete.(DSR-2023 11.41.2) |
| 10 | Supply and fixing of 25 dia & 600 long bolt with nut-----complete item |
| 11 | Supply and fixing of steel plate with steel nut -----complete item |
| 12 | providing and fixing stainless Grade304 railing made of hollow bubes channels , plates etc. including welding grinding buffing polishing and making curvature (wherever required) and fitting the same with necessary stainless accessories & stainless steel dash fasterners,stainless steel bolts et if required sizes, on the top of the floor or side of waist slab with suitable arrangement as per approval or Enfineering -in charge- for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts bolts, fasteners etc..(DSR N0. 10.28) |
| 13 | Providing corrugated G.S sheet roofing including vertical/ curced surface fixed with polymer coated J or L hooks nuts 8mm dia meter with bitumen and G.I limpet washers filled with while lead, including a coat of approved steel primer and two of approved paint on overlaping of sheets complete---------------cutting to size and shape wherever required. (DSR N0- 12.1.3) |
| 14 | Supply fixing retro reffective overhead signage board madeup to2 mm thick aluminium sheet face to be fully coved with high intensity and encupsulated lens type heat activated retro reflective sheeting conforming totype - of ASTM-D-4956-01as approved by engineering charge letters borders etc.as per IRC:67-2001 in silver with with colour back ground and with high intendsity grad pasted on suctrate by pressure sensite adhesive backing which shall be activited by appling pressure conforming to class 2 of ASTM-D-4956-01 and fixing the same to plte of structual frame work by means of suitable sizes aluminium alloys.rivets or bolt &and nuts @ 300mm centreto centreall alonge the -------------------------(structual frame work including M.S. plte to to be provided saparately. Rectangular area of the sheet only shall be measrued for payment). (DSR.2023, 16.60,1) |
| 15 | transparent acrylic sheet at approved quality 3mm thick (m.r.) Please Enable Macros to View BoQ information |
