|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of oil (including mixed soil but excluding laterite or sandstone) including emoving, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and amming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers ot exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) With earth obtained from excavation of foundation |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.(a) Single brick flat soling (thickness 75 mm.) |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.(b) River bazree |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety |
| 6 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm shuttering without staging in foundation. |
| 7 | © Steel shutteringor 9 to 12 mm thick approved quality ply board shuttering in any concrete work |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m Tor steel/Mild SteelJSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). (i) With 1:6 cement mortar(c) 15 mm thick plasterIn Gr.Fl. |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, windowsill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 11 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, allconsumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. (i)For roof truss works ) For roof truss worksa) Span up to 12 Mtr |
| 12 | Supplying, fitting and fixing single skin colour coated trapezoidal profile for wall cladding, Roof shall be made of 0.45 mm BMT (Base Metal Thickness) (0.50mm TCT (Total coated thickness excluding paint), G550 (min 550 yield strength), of Zincalume metallic coating (IS15965) with high Solar Reflectance Index (SRI)value for better cooling as per thermatech technology, 1000-1015mm effective cover width with five major corrugation, 28mm high rib spaced at 203 mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet shall be fastened with 40 micron zinc coated or 25 micron zinc-tin alloy coated, hex head, self- drilling screw as per IS 3566-2002 Class 3 fastener. The base steel shall be coated with zinc- aluminium alloy Zincalume (AZ150)(i.e. 55% Al, 43.4% Zinc, 1.6% Si) minimum of 150 g/m2 coating total on both sides, pre-printed with colorbond XRW (xterior roofing, walling) paint system of 35micron Super Durable Polyester paint (SDP) with stablle inorganic pigment with no lead contents confirming IS15965. The sheet shall be free from defects and have brand making of the manufacturer giving product details on the back side of the sheet at regular interval confirming genuinity of the material.In Roof : 0.5mm th. Shee |
| 13 | Supplying, fitting &fixing UPVC pipes A-Type and fittings conforming to IS:13592-1992with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc i fnecessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. |
| 14 | a) Plain Teeii) 110 mm. Dia. |
| 15 | B) UPVC Fittings:c) Bend 87.5 degree(ii) 110 mm. Dia. |
| 16 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4)with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) andmarble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joint sorroughening of concrete surface and application of cement slurry before flooring works using [email protected] kg/sq.m all complete including all materials and labour.(iii) 35 mm. thick |
| 17 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : (ii) Two coats (with any shade except white) With super gloss(hi-gloss) |
| 19 | G.S.T. @ 18.00% |
| 20 | Labour Welfare CESS @ 1.00 % Please Enable Macros to View BoQ information |
