|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Providing and Laying of stone soling hand packed in horizontal on level including cost of stones. |
| 4 | Providing and Laying of stone soling hand packed in horizontal on level including cost of stones with all sort of carriages, loading ,unloading and stacking etc. Complete job as directed by Engineer-in-Charge. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level With:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 10 | Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Suspended floors, roofs, landings, balconies and access platforms. |
| 12 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with .1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 15 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood |
| 17 | Providing and fixing panelled or panelled and glazed shutters (30mm thick) for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood |
| 18 | Providing and fixing ISI marked flush door shutters (30mm thick) conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 19 | Providing and fixing 5mm Thick Glass panes including beading, nails, carriages maunal/mechinical & all other necessary fittings, complete job as per the direction of Engineer-in-charge. |
| 20 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 21 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 22 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 23 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 24 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 25 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 27 | Providing and laying of stone dust including watering ramming with all carriages loading un-loading etc, all complete as per direction of Engineer-in-charge. |
| 28 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo-Mechanically Treated bars of grade Fe-500D or more.) |
| 30 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: Welded. |
| 31 | Providing & fixing Colour Coated High Rib C.G.I sheets 0.50 mm thickwith zinc coating, fixed with polymer coated secrews upto(a pitch of 60 degree) excl. cost of purlins, rafters & trusses complete as per the directions of Enginer-In-Chanrge. |
| 32 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size of tile 600x600 mm |
| 34 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. ( 0.50 mm thick with zinc coating not less than 275 gram/m2 ) |
| 35 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (100x10 mm) |
| 36 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. (125 mm) |
| 37 | Providing and fixing of L-Drop of standard make incl. Locking system and other necessary fittings complete job as per the direction of Engineer-in-charge. |
| 38 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 39 | Providing and fixing of Wooden railing (ist class kail wood) as per approved design including finishing/polishing , other necessary fittings & all sort of carriages etc complete job as per direction of Engineer-in-charge. |
| 40 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 43 | Providing and Fixing of 10mm thick wooden panelling of imported wood incl. 0mm thick plywood of approved brand, touch wood polish and with cornice 2\\"x2\\" Complete job as per the direction of Engineer-in-charge. |
| 44 | Providing and fixing imported type-2 venyl Wallpaper of approved make and quality over the existing POP punned masonary Wall/Gypsum board surface as per the deailed drawing.The wallpaper should be properly finished with fiber tape,proprietary make jointing compond , levelled and smooth wave free finished surface. The agency shall take care of the smoothness and level of the existing wall/gypsum surface so as to provide best aesthetic views. Wallpaper patern and colour shall be finalised as per the direction of Engineer-in-charge. Complete job |
| 45 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 46 | Providing and fixing wardrobe 24\\" deep, made of 18 mm thick plywood for carcass and shutters and 12 mm thick plywood for back, complete with internal lamination and external decorative laminate (Dylmica on exposed surfaces, including adhesive, drawers with telescopic channels wherever required and all necessary hardware fittings such as hinges, locks, handles etc.and including cost of adhesive, screws and other consumables, complete in all respects as per approved design and directions of the Engineer-in-Charge. |
| 47 | Providing and fixing kitchen cabinets 15' deep made of 18 mm thick plywood for carcass and shutters and 12 mm thick plywood for back panel, complete with internal lamination and decorative laminate (Dylmica) on exposed surfaces, including shelves, drawers with telescopic channels, necessary hardware fittings such as hinges, handles, locks, etc., and including cost of adhesive, screws and other consumables, complete in all respects as per approved design and directions of the Engineer-in-Charge. |
| 48 | Providing and fixing of wooden flooring 10mm thick wooden flooring of approved brand and manufacture in desired shade, including necessary underlay/foam insulation, edge beading, cornice/skirting, and all required acceriories complete in all respects as per the directions of the Engineer-in-Charge. |
| 49 | Supplying and stacking of Good Earth at site. |
| 50 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction |
| 51 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 52 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 53 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length. |
| 54 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 55 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia |
| 56 | Providing and fixing of Manhole of internal size 18\\" x 18\\" constructed with brick masonry in cement mortar of approved mix, including 12 mm thick internal and external plastering in cement mortar, finished smooth with neat cement polishing to inside surface, complete in all respects as per drawings and directions of Engineer-in-Charge, including providing and fixing of heavy duty C.I./M.S. cover with frame of approved make. complete job |
| 57 | Dry Rubble Masonry with hard quarry stone of approved quality, hand packed and properly laid in position with proper interlocking,including cost of stones, dressing of stones where required, all leads, lifts and carriage of materials as per site conditions, complete job as per the direction of Engineer-in-charge. |
| 58 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 59 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 60 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 61 | Providing and fixing PVC pipes of approved brand and manufacture, including excavation of trenches, laying, jointing, refillingetc. complete job as per directions of Engineer-in-Charge. |
| 62 | 100mm Dia |
| 63 | 75mm Dia |
| 64 | Providing and fixing PVC Door Tee of approved brand and required size, complete as per directions of Engineer-in-Charge. |
| 65 | Providing and fixing PVC Collar of approved brand and required size, complete as per directions of Engineer-in-Charge. |
| 66 | 100mm Dia |
| 67 | 75mm Dia |
| 68 | Providing and fixing Floor Trap 100 mm dia with grating of approved make and quality, including jointing, fixing in floor, and making proper connections complete as per directions of Engineer-in-Charge. |
| 69 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
| 70 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 71 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 72 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 73 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 74 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 75 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 76 | External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) |
| 77 | Providing and fixing PPR Unions |
| 78 | PPR Union 25mm |
| 79 | PPR Union 32mm |
| 80 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 81 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 82 | Carriage of different materials by Mechanical Transport including loading ,unloading and stacking from different sources upto site of work. |
| 83 | Sand for an average lead of 10 km. |
| 84 | 20mm aggregate for an average lead of 10 km. |
| 85 | 40mm aggregate for an average lead of 10 km. |
| 86 | Stone Soling for an average lead of 10 Km. |
| 87 | Bricks for an average lead of 90 Km. |
| 88 | Earth for an average lead of 60 Km. Please Enable Macros to View BoQ information |
