|
| 1 | MCEW(Cons) Special repair to Sanskrutha Patashala at Keshava temple and inscription Belur (Supply of Material) |
| 2 | River Sand : Supply of Good Quality river sand (Coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5% by mass, free from silt , shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar |
| 3 | Supply of Good Quality 1st class Surkhi: Used as fine aggregate in lime mortar. Surkhi, Powdered broken brick, prepared by pozzolanic material well burnt good quality bricks / clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, Lime mortars and, Lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( Test reports as per IS standard from recognised govt agency and the material sample approval should be taken from the office before supplying) |
| 4 | Lime - Supply of Good Quality un slaked Lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method: On the process of slaking, from non-hydraulic lime Silica and alumina in quantities of less than 15% in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25N/mm² Compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications . |
| 5 | Jaggery - Supply of Good Quality Jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge. |
| 6 | Antuwalakai - Supply of Good Quality Antuwalakai, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge. |
| 7 | Kadukkai - Supply of Good Quality Kadukkai ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the site in charge. |
| 8 | Hiring and Running charges of Grinding machine including transportation, driver etc as per instruction of site in charge for 9 days |
| 9 | Teak wood - Supplying first class ( Grade A) superior grade teak wood it should be well-seasoned should have long and straight grains in golden brown colour it should be free from knots and white streaks for frames/ shutters of doors, windows, ventilators, beams, columns, lintels, planks, other frames/shutters as per required size and shape etc the wood sample approval should be taken from the office before supplying the Test reports like ( Identification woods , seasoning test , compressive / tensile strength tests etc should be provided from recognised govt agency as per instruction of engineer in charge and site requirement |
| 10 | special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform color, with minimum compressive strength and controlled water absorption (e.g., <20%), free from cracks, lime nodules, and excessive warping, guided by standards like IS 1077, IS 2691, and IS 3952 |
| 11 | M S round rods 12mm dia – as per required dimensions, grades (like IS 2062 E250, ASTM A510M), chemical composition, and mechanical properties (tensile/yield strength, elongation) to ensure suitability for construction or fabrication, with common specs including low carbon content |
| 12 | Ready mix pink or grey primer |
| 13 | Synthetic enamel paint |
| 14 | Modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., <20%), free from cracks, lime nodules, and excessive warping, guided by standards like IS 1077, IS 2691, and IS 3952 |
| 15 | Hiring of Base jack, mild steel tubes 40mm dia MS tube, Bracing ladder 1.5m length, side support 1.5 m length, spigot, Bolts and nuts, Double coupler and level plate challies. |
| 16 | Cement mortar 1:4 - 1 part cement to 4 parts sand ratio, specify clean, dry sand, mention water as needed for workability, note its use (e.g., bricklaying, blockwork, tile bedding), and including material quality (OPC cement type) and standards (like IS codes in India),ensuring consistency with measured proportions for strength |
| 17 | Dehradun white lime - a fine, white powder, chemically calcium hydroxide, with high purity (90-99%), fine particle size, alkaline pH (12.5-13.0), and low moisture, crucial for construction. |
| 18 | Trowel sharp edge - Blades: Hardened, tempered high- carbon steel for durability; stainless steel for rust resistance. Handles: Smooth, seasoned hardwood or PVC. Should be in accordance with Indian Standards IS 1630 (1984). (The material sample approval should be taken from the office before supplying) |
| 19 | Trowel curve edge - Blades: Hardened, tempered high- carbon steel for durability; stainless steel for rust resistance. Handles: Smooth, seasoned hardwood or PVC. Should be in accordance with Indian Standards IS 1630 (1984). (The material sample approval should be taken from the office before supplying) |
| 20 | Wooden Float 30cm X 15 cm Wooden Float- crafted from high-grade, seasoned hardwood such as mahogany, teak, redwood, or jarrah to resist wear, warping, and water damage. it should be flat, smooth wooden base with a sturdy, well-balanced wooden or durable composite handle. Lightweight (The material sample approval should be taken from the office before supplying) |
| 21 | Plastic Buckets - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from High- Density Polyethylene (HDPE) or Polypropylene (PP),offering impact resistance, chemical resistance, and UV protection for outdoor use. (The material sample approval should be taken from the office before supplying) |
| 22 | Aluminium screed 2inchX1inchX5feet |
| 23 | Aluminium screed 2inchX1inchX3feet |
| 24 | Curing pipe one inch 100 meter – PVC pipe length 100m with good quality, durable easy to use, light weighted etc. (The material sample approval should be taken from the office before supplying) |
| 25 | Rubber hand gloves set - should compliance with standards such as EN 388:2016 (Mechanical Risk) and ANSI/ISEA 105 (Cut Resistance). (The material sample approval should be taken from the office before supplying) |
| 26 | Cloth hand gloves set-should compliance with standards such as EN 388:2016 (Mechanical Risk) and ANSI/ISEA105 (Cut Resistance). (The material sample approval should be taken from the office before supplying) |
| 27 | Safety shoes should meet requirements such as water impermeability, puncture resistance and slip-resistant soles, Safety or protective footwear (EN ISO 20345): It has a minimum impact resistance of 200 Joules and compressive strength of at least 15 KN at the toe cap. (The material sample approval should be taken from the office before supplying) |
| 28 | Safety Helmet - Strong, rigid materials like High-Density Polyethylene (HDPE), ABS, or Polypropylene (PP), Dome- shaped, without metallic parts, UV resistant. Harness System (Suspension), Impact Absorption, Penetration Resistance, Electrical Insulation: Class G (general), Temperature Resistance, Standards & Certifications - IS 2925(The material sample approval should be taken from the office before supplying) |
| 29 | Shovel – Head made up of steel and handle with good wood material with Minium strength to work, with proper handle rubber etc. |
| 30 | PVC Round Pan (ghamela) - High-grade Virgin PVC (Polyvinyl Chloride) or heavy-duty Polypropylene (PP/PPCP) for high strength and flexibility. Smooth interior surface, Crack and impact-resistant, Weather-resistant for both indoor and outdoor use, generally 5mm to 10mm thickness, Shape: Round, open-top bowl, standard construction sizes usually 15-18 inches diameter, 10 kg to20 kg load capacity. Roughly 8 to 12 inches height. (The material sample approval should be taken from the office before supplying) |
| 31 | Sieving mesh with wooden side frame with stand mechanism of size 2 feet X 5feet |
| 32 | Plastic water storage pot – good quality, round shape with good water capacity etc. |
| 33 | Water drums 200L - 200 Liters capacity, made of HDPE (plastic), corrosion resistance, UV stability, and lightweight (~8–10 kg empty Removable lid with a metal or plastic locking ring/clamp for easy filling, cleaning, and access. (The material sample approval should be taken from the office before supplying) |
| 34 | PVC water drum 1000 Liters capacity- A 1000-liter PVC water drum (or tank) typically features like durable, UV-stabilized plastic, cylindrical shapes, varying thickness (e.g., 3mm to 7mm+) for strength, and offering strong, corrosion-resistant storage for drinking, industrial, or agricultural water needs, with options for multiple layers and specific fittings. |
| 35 | Tarpaulin sheet 30 feet X 40 feet high-density polyethylene (HDPE) or Multi-Layered Cross Laminated (MLCL) materials, often with 120 GSM to 250 GSM (grams per square meter) thickness for durability, 100% Waterproof and Weatherproof and UV Stabilized/Protected (essential for long-term outdoor exposure). |
| 36 | Use and through mask - Non-woven polypropylene (disposable), activated carbon, silicone rubber (reusable masks), used for heavy-duty, dusty conditions, Filters at least 94-95% of airborne particles. |
| 37 | Hammer 2kgs head with handle - Head is hardened and tempered, typically ranging from HRC 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, Handel made up of high-quality hardwood. two-color carbon fiberglass shaft designed to absorb shock and reduce hand fatigue. |
| 38 | Chisel – Made up of High-grade alloy steel, chrome- vanadium (CrV) steel, or carbon steel for high durability. Induction-hardened tips (around HRC 63–65). Bevel-edged,flat, or pointed (moil) edge. (The material sample approval should be taken from the office before supplying) |
| 39 | Sharping charges of chisel 5nos X 2times=10 |
| 40 | Gunny bags - Made up of jute, Free from dirt, Mold, orresidue, free from cuts, holes, or fungal growth, and never used for harmful chemicals (like cement/fertilizers). |
| 41 | Aluminium wire 90m coil |
| 42 | Switch box 4 module, switch, socket |
| 43 | Bulb LED 18W |
| 44 | wire brush |
| 45 | coir brush Please Enable Macros to View BoQ information |
