|
| 1 | Roofing PART |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : |
| 3 | Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 4 | Providing and fixing color caoted Hi Rib 0.50mm sheet roofing fixing with self driven screws of required size including epoxy seal overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins rafters and trusses complete Job as per the specification and directions of the Engineer in Charge. |
| 5 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 6 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 7 | Providing and fixing of 12mm thick commercial plywood including cost of nails/ Cutting Placing all as per directions and specifications provided by the Engineer in Charge. (Frame work shall be paid for separately). Including scaffolding upto level V etc Complete. |
| 8 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 10 | Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class teak wood |
| 11 | Providing and fixing plained eaves boarding. 300x40 mm (nominal size) |
| 12 | Providing and fixing of Colour Coated Rain Gutter of .50mm Width 150mm Wide With MS Clamps Fixed as per Required Design and Pattern Complete Job. |
| 13 | Providing and fixing of Pvc Pipe of Approved Brand and Manufacture Complete Job with all necessary fixtures like Bends,Tee,Collar etc Complete Job 75mm Dia Type A As per the directions and specifications provided by the Engineer in Charge. |
| 14 | DRAINAGE |
| 15 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 16 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix) |
| 17 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 18 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 19 | Providing and laying in position cement concrete of specified grade M-10 including curing but excluding the cost of centering and shuttering - All work upto plinth level with 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 20 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:- 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 21 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 20.5.5 450 mm dia. R.C.C. pipe |
| 22 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and nside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (2.0' x 2.0'.2.0\\" ) incl PVC manhole cover heavy duty with frame of approved quality |
| 23 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 24 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. (20.26 ) |
| 25 | Centering and Shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings , balconies and access platforms. |
| 26 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 27 | Carraige for materials from 15 km Avg. Lead. SAND |
| 28 | Carraige for materials from 15 km Avg. Lead. Aggregate |
| 29 | REPAIR AND RENOVATION OF BATHROOMS |
| 30 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or leaner mix (i/c equivalent design mix) |
| 31 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.7.4 In cement mortar |
| 32 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 33 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Including Carraige All Job Complete. |
| 34 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 35 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 36 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:- 1:4:8 (1 cement : 4 coarse sand : 48graded stone aggregate 20 mm nominal size) |
| 37 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete job |
| 38 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: : 6 ( 1 cement : 6 fine sand) |
| 39 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.16mm |
| 40 | Ball Valve |
| 41 | Gate Valve 20mm |
| 42 | Check Valve 25mm |
| 43 | Union 20mm |
| 44 | Union 25mm |
| 45 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 46 | Providing and fixing of 1.0 hp unidirectional flow motor of kirloskar or equivalent make and as per relvan IS specifications including all fittings viz; inlet & outlet connections & electric fittings complete as directed by Engineer incharge |
| 47 | C.P. BRASS FITTINGS Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 |
| 48 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 49 | Providing and fixing 15 mm nominal bore C.P. brass wall mixer of apporoved brand and manufcature |
| 50 | Providing and fixing of health faucet of approved brand and manufacturre complete job |
| 51 | Providing and fixing c.p soap case Complete Job |
| 52 | Providing and fixing c.p gratting 100 mm Complete Job |
| 53 | PVC OF GRADE (B) 110 mm dia(INCLUDING all fixtures involved in fixing of the same like socket bend air vent complete job) |
| 54 | PVC OF GRADE (B) 75 mm dia(INCLUDING all fixtures involved in fixing of the same like socket bend air vent complete job) |
| 55 | PVC DOOR BEND 110 MM |
| 56 | PVC COLLAR 110MM |
| 57 | PVC BEND 110MM |
| 58 | PVC DOOR BEND 75 MM |
| 59 | PVC COLLAR 75 MM |
| 60 | PVC BEND 75 MM |
| 61 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 62 | Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported KD Wood |
| 63 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 64 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.21.1 With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws 35 mm |
| 65 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35 mm klin seasoned and chemically trated hollow wood |
| 66 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.klin seasoned and chemically trated hollow wood |
| 67 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100mm |
| 68 | 150mm |
| 69 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100mm |
| 70 | 150mm |
| 71 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. |
| 72 | Providing and fixing of Heavy duty glass panes 3.5 mm thick )instead of ordinary glass panes13.75kg/sqm in doors windows and clerestory window shutters (Area of opening for glass panes excld portion inside shall be measured) |
| 73 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 74 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 75 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 76 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and nside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design.(2.0' x 2.0'-9.0\\" x 1.0'-6.0\\" ) incl PVC manhole cover heavy duty with frame of approved quality |
| 77 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 78 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 79 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 80 | Construction of Septic tank including earthwork in excavation upto the depth of 7feet deep and 20'-0\\" L & 10' Wide including Brick work WALL S in 1:4mix having thickness 0'-9\\"incl laying of RCC Slab AND RAFT 10\\" in 1:1.5:3mix AND SLAB THICKNESS ts 0'-6\\" including reinforcement , shuttering 50mm thick cement concrete flooring in 1:2:4 with floating coat of neat cement slurry, 15mm thick inside cement plaster in 1:3 mix with floating coat of neat cement slurry & PVC Manhole heavy duty with frame of required size & of approved quality INCLDUNG WALLS OF BRICK IN 225 MM THICK IN 1:6 MIX COMPLETE JOB |
| 81 | Carriage of Bricks 15km lead |
| 82 | Carriage of Aggregate 15km lead |
| 83 | Carriage of Sand 15km lead |
| 84 | NEWLY CONSTRUCTED ACR BUILDING |
| 85 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete |
| 86 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm Anti Skid to be Applied Complete Job. |
| 87 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 18MM |
| 88 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 89 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:13.57.1 Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 90 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 91 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 92 | Providing and Fixing of EXHAUST POINT point includimng wiring for FAN point in 1.5mm sq.mm pvc insulated copper wire and 2.5MMmm sq pvc INCLUDING insulatATION OF 300MM EXHAUST FAN multistrand copper wire for FAN POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 93 | Providing/fixing of lighting point includimng wiring for lighing point in 1.5mm sq.mm pvc insulated copper wire and 2.5mm sq pvc insulated multistrand copper wire for lightingsub mains 6 amp one way switch.2mm thick pvc conduit/channael with bends .junction boxes etc,6Amp S.pole MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE WITH 9 WTT LED LIGHT COMPLTE JOB |
| 94 | Providing/fixing of HEATING point including wiring for HEATING point in 2.5mm sq.mm pvc insulated copper wire and 4MMmm sq pvc insulated multistrand copper wire for HEATING POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE ( at different spots in divisional office) |
| 95 | Providing/fixing of Geyser of approved brand and manufacture with all necessary fixtures like C.P Connections 50 Litre Capacity all job complete as per the directions and specifications provided by the Engineer in Charge. Please Enable Macros to View BoQ information |
