|
| 1 | Supply of 6 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 2 | Supply of modular base & cover plate for 4 module |
| 3 | Supply of modular base & cover plate for 8 module |
| 4 | Supply of modular base & cover plate for 12 module |
| 5 | Supply of modular GI box for 4 module |
| 6 | Supply of modular GI box for 8 module |
| 7 | Supply of modular GI box for 12 module |
| 8 | Supply of S.P. 5/6A, one way modular switch, ISI marked |
| 9 | Supply of S.P. 15/16A, one way modular switch, ISI marked |
| 10 | Supply of 3 pin 5/6A modular socket outlet, ISI marked |
| 11 | Supply of 6 pin 15/16A modular socket outlet, ISI marked |
| 12 | Supply of 32/0.20 mm (1.0 sqmm) twin circular, FRLS PVC sheathed, workshop flexible copper cable |
| 13 | Supplying of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast/Extruded aluminium Body (thickness>1.20mm) 18-22 W |
| 14 | Supply of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 15 | Supply of 6-32A ratings, SP MCB \\"C\\" curve, 10kA breaking capacity |
| 16 | Supply of 40A, 2 pole isolator |
| 17 | Supply of 25A rating , 2 pole RCCB, 30mA. |
| 18 | Supply of stepped type Modular Fan regulator (2 module) |
| 19 | Supply of PVC insulated tape roll 18mm wide of 8 metre length ISI marked complete as reqd. |
| 20 | Supply of XLPE insulated PVC sheathed Al. Conductor Un-Armoured Cable 1.1KV grade conforming to IS-7098 of following size:- 2x6 sqmm Please Enable Macros to View BoQ information |
