|
| 1 | Dismantling works for Removal of Sluice Gates and parts.This job includes the cutting and removal of the corroded parts of the existing choked Sluice Gate including Hoisting it up, Cleaning (Sand paper or Wire Brushing), Denting and Repairing of the Bent Jacket and Shutter and other channels and beams included in the existing assembly. Any other minor civil works or existing frame works are also included in this job |
| 2 | SITC of Gear Box for Sluice gates.Supply, Installation, Testing and Commissioning of Manually operated Gear Box Suitable for approx. 2000 x 1000 mm Sluice gates, rising spindle, upward opening, flush bottom closing type.This also includes the replacement of top and lower housing of spindle and rubber seal. Material of Construction:-1) Gear Box : Cast Iron2)Spindle: Mild Steel 40 mm 3) Hand Wheel : Mild steel4) Bush: Gun Metal5) Housing: MS |
| 3 | Installation and Commissioning works.Surface cleaning and finishing of the parts and applying at least two coats of metal primer and two coats of epoxy based enamel.Transporting the gate back to the site (if repaired in workshop).Alignment with the existing frame.Fixing bolts and sealing components.Lubrication and testing for smooth operation.Trial Run & Water Leak Test. |
| 4 | Providing laying testing and commissioning of B class Medium duty GI Pipe confirming to IS1239 including welding fittings like elbows,tees,flanges,tapers,nuts, boltsgasketsetc. and fixing the pipe underdeck with suitable clamps/support frame and painting with 2 or more coats of synthetic enamal paints of required shade complete as required. This includes all the delivery piping,drain pumping and fountain piping.a) 100 mm dia. |
| 5 | b) 80 mm dia. |
| 6 | c) 65 mm dia. |
| 7 | d) 50 mm dia. |
| 8 | e) 40 mm dia. |
| 9 | f) 25 mm dia. |
| 10 | Supplying, fixing, Testing and Commissioning of Butterly valve of PN1.6 rating withbronze/gunmetal seat duly ISImarked complete with Nuts, bolts, washer, gaskets confirming to IS 13095 of following sizes as required. a) 100 mm dia. |
| 11 | b) 80 mm dia. |
| 12 | c) 65 mm dia. |
| 13 | d) 50 mm dia. |
| 14 | Providing, Installation, Testing and commissinong of Non Return Valve of Following sizes confirming to IS5312,complete with rubber gasket, GI bolts, nuts, washer etc. as required.a) 100 mm dia. |
| 15 | b) 80 mm dia. |
| 16 | c) 65 mm dia. |
| 17 | d) 50 mm dia. |
| 18 | Providing, Installation,Testing and commissioning of Stainlesssteel Basket type Stainer fabricated out of 1.6mm thick stainless steel,grade 304 sheet with 3mm dia. Holes with stainless steel flange.a) 100 mm dia. |
| 19 | b) 80 mm dia. |
| 20 | c) 65 mm dia. |
| 21 | d) 50 mm dia. |
| 22 | Supply,Installation,Testing and Commissioning of inlet 80 / 100 mm dia having spray dia of 400 mm - 600 mm , Centre High Volcano Jet Nozzle, made out of Stainless Steel 304Gr. Body Jets as per design to produce frothy volcano water effect from 2-3 metre height complete as per the direction & entire satisfaction of Engineer in charge. |
| 23 | Supply, Installation, Testing and Commissioning of 8mm dia of customised 3 way Finger Jet Nozzle (Minumum 5 numbers minimum size 8 mm nozzle dia) in (SS304Gr) or Gunmetal with chrome plated with spray dia of approxmately 3m. The Nozzle unit shall be mounted over.S.S. 304 grade enclosure as per design of manufacturer with inlet of minimum 40 mm / 50 mm of as per entire instruction, direction and satisfaction of Engineer-in-charge. |
| 24 | Supply, Installation, Testing and Commissioning of 8mm dia of customised 2 way Finger Jet Nozzle (Minumum 3 numbers minimum size 8 mm nozzle dia) in (SS304Gr) or Gunmetal with chrome plated with spray dia of approxmately 3m. The Nozzle unit shall be mounted over.S.S. 304 grade enclosure as per design of manufacturer with inlet of minimum 40 mm / 50 mm of as per entire instruction, direction and satisfaction of Engineer-in-charge. |
| 25 | Supply, Installation, Testing and Commissioning of 8mm dia of customised Revolving Jet nozzle having inlet of 1.5 Inch (SS304Gr.) or Gunmetal / brass with chrome finished having spray dia of mimimum 3m.The nozzle shall have suffcinet arms using water pressure for rotation The Nozzle unit shall be mounted over S.S. 304 grade enclosure as per design of manufacturer with inlet of minimum 40 mm / 50 mm of as per entire instruction, direction and satisfaction of Engineer-in-charge. |
| 26 | Supply, Installation, Testing and Commissioning of horizontal Monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oilseals with sleeves and thrust bearing having all rotating parts dynamically balanced forsilent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI, Pump Body : CI, Capacity : Minimum 12.5 HP Three Phase Discharge 35 to 45 LPS or as per OEM requirments.Head 20 to 30 mtr or as per site requirmentsSuction & Deliver: 80x80mm or as per OEM |
| 27 | Supply, Installation, Testing and Commissioning of horizontal Monoset submersible Pump Set with totally enclosed water filled squirrel cage induction motor water lubricated with oilseals with sleeves and thrust bearing having all rotating parts dynamically balanced forsilent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI, Pump Body : CI, Capacity : 10 HP Three Phase, Discharge 20 to 30 LPS, Head 20 to 30 mtr.Suction & Deliver: 80 x 65mm or as per OEM |
| 28 | Supplying Installation Testing and commissioning of horizontal monoset submersible PumpSet with totally enclosed water filled squirrel cage induction motor water lubricated with oilseals with sleeves and thrust bearing having all rotating parts dynamically balanced forsilent operation Suitable for three phase 50 HZ AC supply as per direction, instruction and entire satisfaction of Engineer-in-charge. Motor Body : CI,Pump Body : CI, Capacity : 5HP Three Phase,Discharge 15 to 20 LPS, Head 15 to 20 mtr.Suction & Delivery 65mmx65mm or as per OEM. |
| 29 | Supply, Installation, Testing and Commissioning of Stainless Steel 304 grade enclosure with MS foundation / Concrete Foundation to assemble Pump, Nozzle, Lights & Fittings arrangement complete as required having sufficient to accomaodate the pumps of required size with fixing stand and fountain etc or Customised as per site requiremnts as per the direction & entire satisfaction of Engineer in charge. |
| 30 | Supply and fixing of Manifold made B Class in size of 100mm Dia and 1000 mm in Length with 1 no. 100/80/65mm dia. Sockets and 2nos. 80/65/50mm dia. Socket welded duly painted complete as per the direction & entire satisfaction of Engineer in charge. |
| 31 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories insurface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm dia. |
| 32 | Supplying and laying of following size DWCHDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.. direct in ground (75cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 33 | Supply/Laying Wiring of Cable 3.5 core 70 sq mm Alumunium conductor PVC insulated |
| 34 | Supply/Laying Wiring of Cable 3.5 core10 sq mm copper conductor PVC insulated |
| 35 | Supply/Laying Wiring of Cable 3.5 core 6 sq mm copper conductor PVC insulated |
| 36 | Supply/Laying Wiring of Cable 3.5 core 4 sq mm copper conductor PVC insulated |
| 37 | Supply/ Laying Wiring of Cable 3.5 core 1.5 sq mm copper conductor PVC insulated |
| 38 | Supply, Installation, Testing and Commissioning of Fordged Brass Ball Valve complete as per The direction and entire satisfaction of Engineer in Charge.a) 50 mm dia. |
| 39 | b) 40 mm dia. |
| 40 | Supply, Installation,Testing and Commissioning of 100mm long male threaded Nipple in Stainless Steel-304 grade complete as per the direction & entire satisfaction of Engineer in charge.40 / 50 mm dia. |
| 41 | Supply & Fixing waterproof high power LED lights watt, and 9x3=27 Watts color changing RGB/Multicolor made out of stainless steel 304gr. Rating IP68 |
| 42 | Supply, Installation, Testing and Commissioning DCC Master Control Device for LED Lights having Specifications:- PIC based controller withmaster & slave communication protocol. Push feature to lock any running colour chase to a fix colour. 24 Pre Programmed colour patterns and Load Circuit-Inbuilt with accessories complete, Body - Plastic/PVC, Input/Output Power - 18Volt DC complete as required complete as per the direction & entire satisfaction of Engineer in charge. |
| 43 | Supply and fixing of Slave Units for run LED Lights, Body - ABS, Input Power - 18V DC, Output Power - 18V DC, complete as per the direction & entire satisfaction of Engineer in charge. |
| 44 | SITC of DC Programmable SMPS controller for LED lights with output 12V DC of suitable capacity suitable for total of 20 RBG lights. |
| 45 | Supply, Installation, Testing and Commissioning of Variable Frequency Drive (VFD) suitable for 12.5 HP-10 KW/3 Phase AC Operating pumps as per direction, instruction and entire satisfaction of Engineer-in-charge (1 Duty + 1 Standby) |
| 46 | Supply, Installation, Testing and Commissioning of Variable Frequency Drive (VFD) suitable for 7.5HP-6KW/3 Phase AC Operating pumps as per direction, instruction and entire satisfaction of Engineer-in-charge.(1 Duty + 1 Standby) |
| 47 | Supply, Installation, Testing and Commissioning of Variable Frequency Drive (VFD) suitable for 5HP-4KW/3 Phase AC Operating pumps as per direction, instruction and entire satisfaction of Engineer-in-charge.(1 Duty + 1 Standby) |
| 48 | Providing and fixing Automatic motor control centres fabricated from 16 gauge M.S. sheet with Powder Coated finish. The control panels should be compatible with H.P. of the motor as under and as per spcifications with automatic star delta starters. (One separate panel to be located in the plant room).a.One incoming main isolation MCCB TPN of Min. 200 Amps. rating.b.Fully taped aluminium bus bar of required capacity in a separate bus bar chamber.c.Isolation MCCB for each unit of required rating and with fully automatic starter as per requirement with push button and ON/OFF indicating lights for each unit, for following requirementsd.Single phasing preventors of suitable rating one for each motor.e. Rotary type Auto/Manual/ ON/OFF selection switches.f.Ammeter and Voltmetersg.Colour coded internal wiring from incoming main to bus bar, switch gear, starters, meters indicating lamp etc., complete in all respects. Complete item.The Outhgoing shall have 1.Outgoing Feeder for 12.5 Hp Pump (1 Duty + 1 Standby ) compatible with VFD starter.2.Outgoing Feeder for 10 Hp Pump (1 Duty + 1 Standby ) compatible with VFD starter.3.2 No, Outgoing Feeders for 5 Hp (2 Duty + 2 Standby ) Pump compatible with VFD starter.4.Feeder suitable for Fountain Lighting.(27 watt x100 Nos)5.Auxillary Feeder (Blank) |
| 49 | Supplying and Making water Proof joint of underwater cables for submersible cable complete as required. |
| 50 | Supplying and fixing of maintenance-free chemical earthing system with GI electrode of size 3.0 m long, 50 mm diameter, hot dip galvanized to 80 microns, with terminal arrangement on top including copper strip/lug for termination. The electrode shall be surrounded with backfill compound (BFC) like bentonite/graphite compound in a bore hole of 100 mm to 150 mm diameter. The complete system shall have a resistance of less than 1 ohm when tested. It shall be installed complete with watering arrangement, PVC cap, funnel, and masonry chamber with CI cover of appropriate size Please Enable Macros to View BoQ information |
